Ooooh that's a great question :) Well... I took the HW100 apart and cleaned and rebuilt the Regulator for that, which shoots at about 11'5ft lb and which I tightened to factory setting. I don't have a way of checking the pressure in the regulator, but T'Internet says it's about 85bar. It's FAR smaller than the cylinder on this HW30S which is shooting at only about 6 fl lb. So the theoretical pressure that is achieved in this HW30 is far far lower than the tiny volume of super pressure air in the Reg on a 100. If I dropped the reg pressure by half in theory I guess the HW100 would drop to 6 ft lb... I'm not making any progress in this brain dump am I? I surrender... I dunno!!! But the HW30 is FAR LOWER PRESSURE under firing
Great look inside!
Hello Canada :) ... I know you have one of these too :). Still love it?
@@mattscountry363 absolutely! It's one of my favorites!
Short and concise.
Wonder how much greater the amount is compared to a plenum in a PCP for the same fpe?
Ooooh that's a great question :) Well... I took the HW100 apart and cleaned and rebuilt the Regulator for that, which shoots at about 11'5ft lb and which I tightened to factory setting. I don't have a way of checking the pressure in the regulator, but T'Internet says it's about 85bar. It's FAR smaller than the cylinder on this HW30S which is shooting at only about 6 fl lb. So the theoretical pressure that is achieved in this HW30 is far far lower than the tiny volume of super pressure air in the Reg on a 100. If I dropped the reg pressure by half in theory I guess the HW100 would drop to 6 ft lb... I'm not making any progress in this brain dump am I? I surrender... I dunno!!! But the HW30 is FAR LOWER PRESSURE under firing
Who pulled what now?
I know you're expecting a biscuit at the end of every video, but it's not gonna happen.