I have a 2014 Town and country van. I have to replace 2 upstream sensors. I am going to replace all 4, upstream and downstream. If I get 4 at once, are they all the same???
From what I have learned is that the upstream 02 sensor is the one that causes engine problems like misfires and the downstream 02 only monitors the health of the cat.
The AC light on a 2007 Toyota Avalon flashing should be as a result of low refrigerant, a faulty AC compressor, or an issue with the AC pressure switch. It's best to start by checking the refrigerant level and then inspecting the compressor if needed.
Having done all and the code is still there, try this Additional steps to fix code P2196 (O2 Sensor Signal Stuck Rich). 1. Look for vacuum leaks in the intake manifold and vacuum lines. Even minor leaks alter air-fuel mixtures. 2. Check the MAF sensor. A dirty or defective MAF sensor can cause a rich engine to run. If needed, clean or replace the MAF sensor. 3. Check the fuel pressure regulator. High fuel pressure can lead to richness. Ensure the fuel pressure meets manufacturer standards. 4. Engine Coolant Temperature (ECT) Sensor Review: A defective ECT sensor might transmit inaccurate temperature measurements to the ECU, generating a rich mixture. 5. Check for obstructions in the exhaust system, including the catalytic converter. 6. Occasionally, a faulty Powertrain Control Module (PCM) might cause improper fuel mixture adjustments. After fixing these issues, clear the code and look for returns. The problem may require a deeper diagnosis if it persists.
To replace the knock sensors on a 2016 Toyota Avalon V6, follow these steps: Take off the engine cover and disconnect the negative battery connection. Take off the intake manifold, and find and disconnect the wire harnesses for the knock sensors. Unscrew the knock sensors to remove them. Install the new knock sensors and reconnect the wires. Put the engine cover and intake manifold back together. Re-connect the battery connection. To meet the manufacturer's recommendations, make sure to torque all of the nuts.
I have a 2014 Town and country van. I have to replace 2 upstream sensors. I am going to replace all 4, upstream and downstream. If I get 4 at once, are they all the same???
Thank you for the information
My pleasure, am glad you like the video.
My pleasure, am glad you like it
From what I have learned is that the upstream 02 sensor is the one that causes engine problems like misfires and the downstream 02 only monitors the health of the cat.
Great information 👍
It's so hard to figure it out on my 2015 dodge charger all the secers have the same symptoms.
You can use OBD2 code readers to scan for trouble codes.
What makes the AC light flash on a 2007 Toyota Avilon
What makes the AC light flashes I wanna hop on a 2007 Toyota Avalon
The AC light on a 2007 Toyota Avalon flashing should be as a result of low refrigerant, a faulty AC compressor, or an issue with the AC pressure switch. It's best to start by checking the refrigerant level and then inspecting the compressor if needed.
Yes indeed.There is much repeation.
Noted. Thanks for your observations
Who can help me with p2196 code, replaced oxygen sensor, injectors good, cleaned intake manifold, egr. Still doesn’t go away. Stuck rich
Having done all and the code is still there, try this Additional steps to fix code P2196 (O2 Sensor Signal Stuck Rich).
1. Look for vacuum leaks in the intake manifold and vacuum lines. Even minor leaks alter air-fuel mixtures. 2. Check the MAF sensor. A dirty or defective MAF sensor can cause a rich engine to run. If needed, clean or replace the MAF sensor. 3. Check the fuel pressure regulator. High fuel pressure can lead to richness. Ensure the fuel pressure meets manufacturer standards.
4. Engine Coolant Temperature (ECT) Sensor Review: A defective ECT sensor might transmit inaccurate temperature measurements to the ECU, generating a rich mixture. 5. Check for obstructions in the exhaust system, including the catalytic converter. 6. Occasionally, a faulty Powertrain Control Module (PCM) might cause improper fuel mixture adjustments.
After fixing these issues, clear the code and look for returns. The problem may require a deeper diagnosis if it persists.
U Forgot P0174 System to Lean Bank 2
My car is really sluggish but no check engine light and misfire now that I put new plugs in.
same here
After watching this video I'm suree my car need new o2 sesnor
Good video, but don't be afraid to use your own voice. This AI voice is getting old.
Thanks bro, am working on it.
Skip to 3 minutes.. before that he's just bullshittin out of the point
How to replace knock sensors on 2016 Toyota Avalon V6
To replace the knock sensors on a 2016 Toyota Avalon V6, follow these steps:
Take off the engine cover and disconnect the negative battery connection. Take off the intake manifold, and find and disconnect the wire harnesses for the knock sensors. Unscrew the knock sensors to remove them. Install the new knock sensors and reconnect the wires. Put the engine cover and intake manifold back together. Re-connect the battery connection. To meet the manufacturer's recommendations, make sure to torque all of the nuts.
10:36
How to replace a oxygen sensor