check your throttle body make sure is clean and clean the sensor next to the throttle body and that will help and make sure u not move the position of the throttle body with your hands because if u do it the u will need to reprogram your throttle body precision because if u not do it the car can get stuck in full acceleration speed and you can have it bad accident so make sure do not move with your hands
I have a 2009 Chevy Impala 3.5 only about 93,000 miles on it I did everything I could I changed the purge valve mass air flow sensor the gas cap even the foot throttle and I change the vent solenoid that is by the gas tank the car runs great no stuttering doesn't stall no black smoke but it's still coming up with the purge valve code and the mass air flow sensor according to my scanner I clear it and a bunch of codes come up but the permanent codes are the mass air flow sensor and the purge valve which I replaced so I'm thinking I had something to do with the wiring it starts up fine it runs fine I'm not losing any gas mileage any suggestions
I need your opinion I changed my original filter for a cts intake everything was fine in my car but after disconnecting the maf sensor and connecting it to it. New filter came on. Check engine light I erased it with a scanner and it no longer came on but I tested it again I changed the filter with the original one I disconnected the sensor and the check engine light came back on what should I do
I have a ranger 2011, when iam on a stop and then press the gas the truck dont move and rpm go higher and a second later it studer and then start going, only do it when is on a stop ,not while running. Any help?.. dealer told me is the differential but i dont think it is,is not one of the symptoms..
Thanks. Very informative and helpful. I wish they had a double like our triple like button on TH-cam. Our a way to endlessly like the video. This is the best video I found about MAF sensors.
Can it cause transmission problems. I have a bmw e39 528i m54. While driving the cog light comes on and get stuck in whatever gear i am on. Please help
My MAF Sensor isn't working properly , my engine starts up as soon as i start the vehicle, Have no Black Smoke coming from the Tailpipe, but the engine surges and my RPM Stumbles 0 and 1 it doesn't stay steady. I found and easy way to check MAF Sensor started the engine then unplug the connector and the Engine stayed Running that's how I found out that it wasn't working , I installed the New MAF Sensor and repeated the same check and disconnect the connector engine shut off right away as it Supposed to. 👍
If it runs better without it.. it's time for a new one. On my car, it's 200 bucks on rock auto. That's where I buy ALLy car parts that aren't an immediate necessity. Much cheaper, never had a problem. The only thing I dont like about it, is sometimes if you need multiple parts, they could ship from separate locations and charge shipping 2, even 3 times. You can switch different parts for cheaper or premium to get them to ship from the same location sometimes.
Excellent video! You explained everything perfectly and understandably!
So my car stuttering when accelerating, especially up hill, could it be the air flow sensor?
check your throttle body make sure is clean and clean the sensor next to the throttle body and that will help and make sure u not move the position of the throttle body with your hands because if u do it the u will need to reprogram your throttle body precision because if u not do it the car can get stuck in full acceleration speed and you can have it bad accident so make sure do not move with your hands
I have a 2009 Chevy Impala 3.5 only about 93,000 miles on it I did everything I could I changed the purge valve mass air flow sensor the gas cap even the foot throttle and I change the vent solenoid that is by the gas tank the car runs great no stuttering doesn't stall no black smoke but it's still coming up with the purge valve code and the mass air flow sensor according to my scanner I clear it and a bunch of codes come up but the permanent codes are the mass air flow sensor and the purge valve which I replaced so I'm thinking I had something to do with the wiring it starts up fine it runs fine I'm not losing any gas mileage any suggestions
I need your opinion I changed my original filter for a cts intake everything was fine in my car but after disconnecting the maf sensor and connecting it to it. New filter came on. Check engine light I erased it with a scanner and it no longer came on but I tested it again I changed the filter with the original one I disconnected the sensor and the check engine light came back on what should I do
I have a ranger 2011, when iam on a stop and then press the gas the truck dont move and rpm go higher and a second later it studer and then start going, only do it when is on a stop ,not while running. Any help?.. dealer told me is the differential but i dont think it is,is not one of the symptoms..
Can a bad maf cause it to stall out?
yes
Good job brother thank you for your video
Thanks. Very informative and helpful. I wish they had a double like our triple like button on TH-cam. Our a way to endlessly like the video. This is the best video I found about MAF sensors.
Check engine light is on and the reading is air flow
Do not use carb cleanor it could damag the MAF use electric contact cleaner
I heard we are NOT supposed to use carb or brake cleaner on the sensors- only MAF cleaner or it will be damaged.
Can it cause transmission problems. I have a bmw e39 528i m54. While driving the cog light comes on and get stuck in whatever gear i am on. Please help
Is black smoke common?
My MAF Sensor isn't working properly , my engine starts up as soon as i start the vehicle, Have no Black Smoke coming from the Tailpipe, but the engine surges and my RPM Stumbles 0 and 1 it doesn't stay steady.
I found and easy way to check MAF Sensor started the engine then unplug the connector and the Engine stayed Running that's how I found out that it wasn't working , I installed the New MAF Sensor and repeated the same check and disconnect the connector engine shut off right away as it Supposed to. 👍
Thanks very helpful
Oh another thing your car is supposed to stall when you unplug the mass air flow sensor my car does not do that it stays running
If it runs better without it.. it's time for a new one.
On my car, it's 200 bucks on rock auto.
That's where I buy ALLy car parts that aren't an immediate necessity.
Much cheaper, never had a problem.
The only thing I dont like about it, is sometimes if you need multiple parts, they could ship from separate locations and charge shipping 2, even 3 times.
You can switch different parts for cheaper or premium to get them to ship from the same location sometimes.
nice ai