dyson brush bar not spinning v6 v7 v8 fixed in minutes
ฝัง
- เผยแพร่เมื่อ 12 ธ.ค. 2020
- dyson brush bar motor head not turning
on the v6 v7 v8 hand held?
I show you how to fix it and get the brush bar spinning again.
this is the same for all the dyson models with a brush bar.
hope this helps you out and fixes your issues.
get new brush bars and parts here.
dyson v6 original brush bar replacement
amzn.to/3hww6Rq
original v6 brush head
amzn.to/3natDx8
cheap v6 brush bar
amzn.to/2JCoEaX
cheap v7 brush bar
amzn.to/3pHs6k0
dyson v8 brush bar
amzn.to/3rFKtHP
I don't get paid for the video but do get paid for completed purchases via the links above.
thank you for your support.
#dyson
#dysonv6 - แนวปฏิบัติและการใช้ชีวิต
![แม่กลองสองใจ - ซีแกรม โตเกียว มิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/GSQfVjcr_f4/mqdefault.jpg)
Amazing, thanks so much, I did everything as you said,working brilliant !!
I was beyond frustrated with my Dyson. It's only a year old!!! I'm proud to say thanks to you It's fixed and is working great again.Truly appreciate your videos..👊👍
Clearing the connection behind the debris tank was a winner for me. Thank you for your instructions.
Cheers for making this video - I had cleaned out the hair along the brush bar so many times, but it was still failing to rotate. It would spin for a half-second, then just stop - a built-in measure meant to stop the brushes from getting things jammed, I imagine.
When I saw in your video that you could remove the twisty plastic part using a T8, I broke out the toolkit and boom: years of hair clogged underneath. Some of it had fused into a semi-solid ring, with a fair amount of disintegrated matter as well. The little metal disc fell out when I pulled the clump free, but it slotted back in nicely. Everything back together and it spun up first time, no issues.
Thanks again - saved us spending on a replacement part, or even a new hoover!
Dyson told me my Motörhead was just bad. Your fix solved the problem. God bless TH-cam!!!! Many thanks
I would have never found that bit behind the T8 screw without you. That was the hidden issue for me. Thank you so much for this very helpful video!
Thanks to you I finally fixed the problem after several other videos and a series of failed attempts to find the problem.
Thanks! This is extremely helpful. The video was clear, to the point and spot on. Five minutes and 25 seconds . . . wow. No fillers, no wasted time. You rock!!
You're welcome!
This is amazing. Did not know that little piece can be removed at 4:10. Pulled out all the hair and it’s spinning stronger than ever. You just saved me hundreds of dollars as I was close to giving up and buying a new one!!
Thank you, the brushbar is now spinning, you have saved me buying a new one. Brilliant.
Thank you! I knew I had to clean under the mechanism that makes the roller turn and couldn’t figure out how to get down there! You just saved me so much money! ❤😊
Thank you... Dyson told me the motor burnt up and wanted $225 for a replacement head... It was the last step of the video that fixed my problem...
Thank you. It gave me the idea of spraying some switch cleaner on the contacts along the way. Let it dry. Attached, detached each point a couple of times and problem solved.
Thank you so much for sharing this. I thought I was going to have to get a new one. This is exactly what the problem was. I couldn’t believe my eyes when the powerhead worked. Thank you 🙏
I've been struggling to get my Dyson working and after watching this video and a quick flick with a fine paintbrush and it's as good as new. Cheers!
Great video. My SV06 brush bar had no current to it. Your opening advice on removing the bin and cleaning the contacts was the answer to the problem. Thankyou
Thank you for this video! My vacuum has been malfunctioning for months. I’ve watched other cleaning videos and none of them had me take off the little rotating part inside the bar. That did the trick! Thank you!! Now I don’t have to buy a new vacuum!
Yes that was also our issue. So much hair
Thanks! Never knew hair could accumulate behind the part the T8 screw holds down. Cleaned and added some silicone grease with PTFE and now everything is working perfect!
Thank you your vid helped sort out problem free of charge ❤
Excellent video! I'd been through the brush cleaning, the connectors on top and bottom of the tube but never knew about the connectors on the dust container. Thanks for the post.
thanks for that! my bearing was all blocked up, even under the bearing cover! i cleaned it all up like you instructed and now it spins
You saved me from buying a new vaccum I’m eternally grateful! I found a plastic lid stuck in the brush head. Thanks!
Wow this was so simple but I had no idea where to look! Thanks for sharing!!!!
thankyou thankyou thankyou!!! removing the bit with the bar via hidden screw solved for me! saved me some cash, brilliant help!!!
You saved me a new replacement. Did as you showed and it fixed the spinning issue. Thanks!
Great video. I knew about the hair being trapped in the head.
But I didn’t know about taking the filter apart and checking the dust on the electrical connection.
I cleaned the connection and dust. Now all working 😊
Wish i watched this before i took the whole thing apart lol. Worked like a charm, thanks for the video.
Brilliant! You saved me £80 for a new head. Subscribed and liked. Thank you.
You are a legend!!! Had a 2nd hand one off my sister but the brush bar didn't work! Cleaned everything after watching one of your video's but after watching this one I now have a brush bar that works........thank you pal! Guys like you probably don't realise the good you do in saving people money by fixing and cleaning they can do with a little help so thanks million 👍
glad to help
The tiny hex screw changed my life. Thank you!
You’re a genius!!!! Thank you so much for solving the problem! Your explanation is fantastic 👌🏻👍🏻👏🏻👏🏻👏🏻
Excellent , I got it working again by watching your video.
Thanks mate the contact points getting a clean fixed it for me
Great video, just about to buy a new one and you saved me a few hundred pounds👍🏼
Thanks Bro! You saved me from buying a new vacuum......I never thought hair could get caught behind the spindle! I would just add a bit of lubricant before reattaching the spindle
Thanks so much. This happened to me this afternoon and I was worried it had finally given up. Dust in the connections was exactly the issue.
Great video. I cleaned the contacts and solved the problem completely. Thanks so much
Brilliant video, short and to the point. The contacts at 0:48, covered in dust,
was the problem with mine. Works like new again. Thank you, thank you.
Thank you! Cleaning the contacts worked for me.
Thank you, I'd been doing everything else in your video bar unscrewing and taking out the black liquorice looking thing. I did that and found a solid circle of hair! Now it works like new, again thank you for taking the time to share your knowledge 👍
glad it helped
Great video. Worked for me. Very easy. Love these fixit yourself vids.
Thanks mate, very helpful. Managed to get the MIL's one fixed with this guide!
All fixed thanks to your video
This is so helpful!!! Saved me the money to buy a new one.
Just watched this video and worked perfectly. The amount of hair behind the screw was incredible. Thanks a lot 👍🏻
glad it helped.
Me too! Who knew my Dyson could come apart like that for cleaning! Many thanks
Thanks. Worked like a charm. There was less debris in mine, but it was the cause.
Thanks a lot man! One expensive replacement battery later my old v6 was still pulsing with the brushbar stopping after a few seconds of use. This ‘little T8 screw’ trick did the job! ;) took that spiral drive thing out and removed all crap from underneath it and bam! All sorted. Old battery is still going strong. No harm in having a spare battery I guess😂
Thank you, took it apart still wouldn’t go until I found this video.
Thanks, the hair behind the rotating spindle on mine was actually part fused together by heat from friction so looked like a real fibre washer! I wouldn't have brave enough to pull the spindle off without this video..btw got away with a small regular Poundland screwdriver v proper torx :-)
I was going to throw mine out, but these handheld vacuums are impossible to find and I love mine! with your video I was able to fix my vacuum, so thank you thank you thank you!!!!
Brilliant thanks, just used this to fix a free old non working Dyson that I’d been given which will now be my car vacuum
thankyou thankyou thankyou😘 my little v6 is now working perfectly🥰
thanks! Especially for mentioning the size of the torx screw as it was very snug and if I had used the wrong sized screw I would have striped it.
Fixed my brush bar in a jiff.
Awesome, worked like a charm. Thanks for making this video!
You are the man🤩🤩🤩👍😄 about to get a new hover not now fixed it with your help works like new nowThank you.
Thank you👍🏻 T8 screwdriver ordered. 🤞hope it does the trick.
Brilliant. I had cleaned everything else up yet the head wouldn't turn. Sure enough there was impacted garbage behind the chingalera. Thank you so much!
Wow excellent video, my Dyson is back to 💯 percent, you deserve 5 🌟 thanks for sharing.
My guy you saved me an assload of money, no replacement dyson for me! Thanks so much, take a like and sub :)
Thanks for the instructions. It worked!
thank you so much it is reeellly help me to fix my dyson be for I don’t know what should I do to fix it and I get sad until I check Google and I see this nice video which is helping me so much appreciate that Sir 🥰🌺
Worked for me. Thank You so much for the video!!
You have saved me buying a new vacuum, thank you 🥳x
You’re welcome 😊
Great vid Mr. Worked on mine thank You.
THANKYOU SO MUCH. IT WORKED OUT PERFECT
Thanks for this tutorial it saved me so much money 🤑
Thanks to your guidance, wife happy ….hoover working like a rolls Royce again …wheel spinning better than ever ..top job .. 👍
many thanks for this. Much appreciated. All the best 🙂
Thanks bro!! Worked a treat. Except I added a little grease to the bearing as it still clogged/stopped spinning. After a touch of grease on the bearing seems to be working okay. Time will tell 😊
Excellent, never knew about that second filter. My V6 brush bar stopped spinning on the opposite end to the motor, and the motor jet spinning the other end. Now that pin is stuck in the end cap. The plastic it sat in git all chewed up.
thanks for this video. extremely helpful
pulling out that last bit fixed it for me. Thanks
so glad you found it helpful.
Thank you.. this was helpful
Thank you! God bless you 🙏
This worked, thank you!
Thank you so much, works perfectly again 🙂
I knew there would be hair behind the big screw. Thanks for showing how to remove
You have saved me from buying a new one. Many thanks.
At last! Thankyou soooo much.
Thank you. It works!!!!
very helpful, thanks!
Thanks 👍 great video.
Thank you so much!
That second clog of hair *inside* the inner end of the brush bar mechanism housing, necessitating taking the whole thing apart with a screwdriver - is a major, major design flaw.
Today my Hoover was saved by this man
Thank you!!
Ahh.... great stuff. just what i was looking for.. I thank you for sharing this... but my wife thanks you Soooo very much. Really appreciate your efforts ;)
Brilliant thanks for sharing your experience, my V6 roller stopped working and when I stopped it down the roller connection was solid and didn't have hope to fix but I followership your video and like you showed us the cause was hair (dog hair) matted it was so bad that I had to remove the motor and belt and then carefully knock the roller drive out after removing the screw and plastic twisted drive of coarse, ,then all of a sudden after removing more matted hair the drive was free running,assembled it back ,and now works like new, I didn't have much hope as using a multimeter I could not get any voltage at all when testing beforehand ? But it works now,
so glad it helped you out and kept another dyson from land fill.
Saviour…thanks so much!
WATCH THESE VIDEOS TO SAVE $$ AND HEADACHES!!
THANK YOU for this video. I love my Dyson V6 but the bar stopped spinning, and I knew the problem was within the rotor piece itself after trying everything else. Though I love Dyson's products and step-by-step help on the website, their phone/chat/email (I tried them all unfortunately) customer service was tedious, frustrating, and ultimately not helpful. Their solution was that I "needed" to buy a $200 replacement motorhead. At first they told me I simply needed to replace the brush itself which I had to argue--literally the man got testy with me for questioning this--was not the solution. After finally convincing them the motorhead was the issue and some further frustrations, they offered me 50% off the motorhead--still $100!!!! I finally decided to dig deeper into just fixing it myself and stumbled across your wonderful video. I even had some Torx screwdrivers on hand surprisingly. The Dyson parts can be difficult/scary to pull apart, but fixing the motorhead was relatively easy and my sincerest thanks for solving an issue (for FREE) which Dyson's customer service could not. Bravo!
I'm so glad that it helped. such a simple repair when you know how.
FYI: had to use a little WD40 on the rotor as well for anyone who's still having issues after cleaning!
Superb thank you so much
Excellent video 👌🏻 worked for me - happy wife happy life 😂
Thank you!
How has this not had more views? I did have to buy the special screwdrivers but made my wife happy. It was her hair that clogged it up though!
Very helpful! Thanks a lot!
And today it helped me again! Thanks again! :)
a new video out now that you would find helpful.
Thanks
Ours V8 has a broken white wire in the swivel joint. There was some lint too, but it will take some rewiring to fix it.
Amazing video!!! Thanks for all the tips.
Removed all the hair (LOTS of it) and cleaned all the electrical connections. Unfortunately, the thing is still not spinning :(
Would you know how I would be able to test if the electrical connectors are actually sending some energy? Maybe with a multimeter or something.
Hello I've followed all steps and gave a very good clean but still not spinning, any idears?
Hi Got the thing apart, great, but no voltage at the two terminals that are exposed on the motor head, any ideas ?