HOW TO EASILY REMOVE RUST IN LESS THAN 1 HOUR: Square Body Chevy Hotrod Build

KILLING RUST Square Body Chevy C10 Budget Hotrod Build.
AWESOME HATS & T-SHIRTS: www.unclebucks...
IF YOU WOULD LIKE TO HELP: www.cash.app/$...
WIRE WHEEL USED: amzn.to/3vgegud
DEWALT DRILL: amzn.to/3qfF76G
PRIMER: amzn.to/3RC26EC
10% OFF THE BEST INDOOR/OUTDOOR SPEAKERS ON THE MARKET
USE CODE: "UncleBucksGarage" for 10% - studiofinix.com?sca_ref=4409456.sIUMTDQ0nu
THIS CHANNEL IS FOR FUN!!
send stuff to:
po box 2088
Muldrow OK 74948

[@hickeyskustomresto]

Used this method a few times, it's worked for me and seemsnto hold up fine.
Did a trucks in 2018, still look perfect today.

[@unclebucksgarage7695]

THANKS FOR WATCHING, HAVE A GREAT DAY

[@rmckayne]

Nice, for some applications. Ospho, and many others, like concrete etching, are phosphoric acid. Is relatively cheap and remove rust, neutralize it . When washed and dry leave a coat ready to receive any primer. Work for me since the 70’. Thanks.

[@unclebucksgarage7695]

thanks for the info. very appreciated. Have a great week

[@wingrider1004]

Some people say if you see red, it proves the vinegar does not remove or neutralize the rust. No. The vinegar DOES neutralize rust. You may have an area that requires some sanding to get to the rust that is embedded, but once there, if vinegar is used, it will not only remove, but neutralize the rust. It is a chemical reality. No hocus pocus. Now, are there other chemicals that work faster? Yes, but you are dealing with more and more toxicity and disposal problems with those - and expense. And vinegar will leave a rust free and sterile surface ready to prime and paint - a little 180 light sanding and cleaning prep may be needed but that's all. Vinegar must be washed off with clean water to neutralize its effect on metal after it is used - and dried after rinsing with water. I just stripped a Ford 9 inch rear end and used vinegar to deal with any rust. The metal is now clean, sterile, and oddly enough, does not flash rust afterwards. Just nice and satiny looking metal, ready to prime and paint. Another thing that affects how your bare metal is prepped is whether it was sandblasted to bare metal or soda blasted. Vinegar work - 4 parts water to 1 part vinegar. Just plain, old , white vinegar. My friend Pete says this is the way it's done - and I believe him :)

[@unclebucksgarage7695]

Thank you very much!

[@douglaspollock102]

Distilled water. Not tap.

[@R3ALSOLDI3R]

I like the fact that keeping the part wet with vinegar means there would be a lot less rust dust flying in the air

[@unclebucksgarage7695]

Yes Sir, Have a great weekend

[@garybuffington6021]

The EASY WAY to keep it WET with Vinegar is to first spray it down. Then apply "connected" paper towels over the area. Then spray the paper towels wet again. Then cover the wet area and wet paper towels with PLASTIC or plastic wrap. Then let it work it's magic. Boom!

[@unclebucksgarage7695]

Great tip!

[@gadbrown7518]

Thankyou! Awesome information

[@grantslater2485]

Thank you for watching have a great weekend

[@zantheman2328]

Great video series!

[@unclebucksgarage7695]

Thanks

[@Rottingboards]

Looks like I could wet sand with 50/50 vinegar water and have less wire wheel spray mess? And finish up with Eastwood phosphate spray then primer.

[@unclebucksgarage7695]

Possibly, let me know how it turns out

[@Austinwiththe07Aspen]

If I wanted to get slightly deeper where it’s all bare metal (shiny metal) would that help or hurt my project

[@unclebucksgarage7695]

Depending on how thick the metal is, pitting can be a problem. But down to bare metal is always the best. Wishing you all the best for the future

[@Austinwiththe07Aspen]

@@unclebucksgarage7695 I just spoke with the Chrysler dealership they suggested Fluid Film rust protection after sanding.

[@unclebucksgarage7695]

LET ME KNOW HOW IT COMES OUT.

[@xsims45]

​@@Austinwiththe07Aspenwhat's that

[@unclebucksgarage7695]

Rust

[@xsims45]

Can you use straight vinegar?

[@grantslater2485]

Yes

[@unclebucksgarage7695]

YES YOU CAN. Just make sure and rinse it off very well.

[@wirefeed3419]

You absolutely can use pure vinegar only if you want better results than shown here. Use 7-10% pure white vinegar, it is a natural safe strong rust remover. It works especially well for soaking rusted parts, soak for 2 days, remove and rinse off the black broken down rust deposits return to soak as wanted. Rinse thoroughly with clean fresh water, small parts can be rinsed with water and baking Soda. For vertical surfaces mix vinegar with cornstarch, bring to a low boil. 1 cup vinegar to 1 tablespoon cornstarch, brush on cover with plastic, do not let the mixture dry out fully.

[@monadking2761]

If you want to neutralize it after using the vinegar on the surface, add baking soda to some water, then rinse with fresh water.
I sometimes soak my rusty parts in straight vinegar and then wire brush the parts. They come out amazing.
Good job!

[@OverTheHillTraining]

What ya really mean is, safety 3rd.😊😂

[@grantslater2485]

Wow

[@unclebucksgarage7695]

LOL have a great weekend

[@mowinggreen6390]

That's so cool

[@grantslater2485]

It cool that you watched, thank you very much. Have a great week

[@mowinggreen6390]

Im having a go at restoring 2 Victa lawn mowers from 1971 and your video was helpful thanks from Australia 👍

[@grantslater2485]

Nice, have fun. Glad to help.

[@randyharris9357]

To much other than repair info

[@unclebucksgarage7695]

THANKS FOR WATCHING, HAVE A GREAT DAY

[@robertdoane2164]

Yes,a mask is very important.Hate to see you in the hospital with breathing problems.

[@unclebucksgarage7695]

thank you, have a great week

[@jamesward5721]

May as well dream here as in bed,eh?

[@grantslater2485]

Thanks

[@unclebucksgarage7695]

thanks for watching

[@markshaw8633]

I think most of that was dirt...

[@unclebucksgarage7695]

thanks for watching

[@acardiac5983]

Wear a mask

[@grantslater2485]

Have a great week

[@unclebucksgarage7695]

thanks

[@xsims45]

​@unclebucksgarage7695 can you use straight vinegar??