Creality Print 5.0 First Look
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2024
- This video is sponsored by PCBWay www.pcbway.com/ Visit their website for all your prototyping needs.
#3dprinting #creality #CrealityK2plus #k1max
I this video we'll install, setup and take a first look at Creality's new 3d Printing slicer, Creality Print 5.0. We'll look at some of it's new features and maybe we'll uncover a bug or two.
My Links linktr.ee/pushingplastic
Creality affiliate link
shareasale.com/r.cfm?b=201599... - วิทยาศาสตร์และเทคโนโลยี
Thanks, great review.
Greetings from Poland
Thanks! I was raised in an area here in the states where a lot of people migrated from Poland in the early 1900's. Lot's of love for the people of Poland! Thanks for watching!
Thanks, great review
Thank you for watching!
Great Review but you forgot to show the painting menu
I wanted to but I wasn't sure how well this video would go over and I didn't want to extend the length of it demonstrating a feature for a printer that we can't buy yet. But I did play with the paint options. I like what I see!!!!!
Great review.
Ive Been using it for the last week, i was going to switch to orca but since trying out 5.0 ive been very impressed so far with my k1
The only problem with it so far is im still getting the crash occasionally when using it
I like how the infill overlap is now set to 15% as standard.
It was at 0% default in the previous creality print
It does have a few bugs, but I know that Creality is currently working hard on Creality Print 5.1 to address these bugs and add new features!
@@pushingplastic7445 i haven't tried the pause for colour change yet, have you? I'll be trying that out tomorrow
Nice video. With the calibration in v 5.0 pass 1 prints then load up pass 2, you can’t pick the best print on Pass 1 . This v5.0 needs much more work on it to fix the bugs. Also Creality, don’t have a user manual for v5.0 that I can find yet.
Good call! I noticed that as well and had a note to mention that in the video and I dropped the ball. I put in a message with the Creality developers on that one. For now I did the "old way" of dialing in Flow where you print the hollow cube, 2 walls, no top, do some measuring, a little calculating....ect. I have an older video on my channel using that method if it helps. Thanks for watching!
Don’t know if have noticed it but when I installed 5.0 in my windows 10 laptop and open the slicer, sliced a normal cube, and no that the preview was showing it printing anticlockwise, so I printed the cube and yep the model was printing anticlockwise. So i uninstalled it, an reinstalled the one that came with my ender 3 v3 se and went back to clockwise printing.
Creality Print 5.0 has a revamped printing algorithm that reduces overall print speed and improves print quality. This could be why you are noticing a difference is print direction. Thanks for watching.
With CR5 PRO-H I have tried Creality Print two years ago however I could not find any advantage with Creality slicer by then I saw Creality Print had less options. Maybe I am not smart enough to do it by myself.
Even so Creality Slicer has less options than Cura.
What are the differences between them?
Thanks for sharing it
Cura is a good slicer. I was using it all of the time and started using Creality Print when the K1 Max was released. Creality Print handles that printer better than Cura did. But the one thing I would like to see in Creality Print that Cura has is the Per Model Settings, or modifiers as they're known in Orca. Thanks for the comment and thanks for watching, I really appreciate it!
great video thank you! How can I download the 5 version for Mac?
Good question. github.com/CrealityOfficial/CrealityPrint/releases/download/v5.0.2/Creality_Print-v5.0.2.8689-macx-x86_64-Release.dmg
I set the chamber temperature for ABS to 45. I wrote 1 below to activate it. The exhaust fan does not activate even at 50 degrees. I set the exhaust fan to operate at 25% during printing. Exhaust fan does not run at all. Could you help?
I'll try to duplicate this and see if I can figure it out!
Shame i can't get nice seams like in V4.38.7058, where have the settings gone in V5?
The second icon from the right in the tool bar is for Paint On seams. If you turn on Advance settings on the Quality tab you'll find the seam settings. Thanks for watching!
So this was made from orca slicer as it even says orca slicer in it in many of the descriptions. But seems to be missing things. Interesting.
Orca slicer is a fork of Prusa slicer as is Bambu Studio and Super Slicer. Prusa Slicer is based on Slic3r, that's how this works. Each developer put's their own twist on their version of the slicer as they develop it.
What do u think are the best setting for the V3 KE?
I don't have the KE, I have an SE, a K1 Max and a few of the other Enders but not the KE. So far I found the built in profiles to be really good.
im used to the previous version. wish this was patterned more like it in the display
does the previous have ender 3 v3 SE
@@jeremyschumacher9123 yes. That is what I have.
Its good, but i cant find a support percentage setting....have you?
I'm assuming you mean infill percentage. It's with the strength settings. There is no support percentage, but there are a lot of support settings that you can find in the Support tab and click Advanced.
@@pushingplastic7445 thank you
@@pushingplastic7445 i printed a model on the default settings, im really struggling removing the supports. Could you do another video like you did with the previous version.....it would really help.. many thanks
@@pushingplastic7445 ps, it was the support density percentage i couldnt find
@@grimwoody9481 Yes I will!!!!!
multicolour printing is coming for the k1/k1/k1max/v3/ke soon it going to be a upgrade those printers listing now are going to be multicolour printing also i have seen that my k1 and max is alot faster at printing also there was a new firmware for both printers alot fast than my bambu lab
My question is will the parts required to upgrade those machines to color be cost effective and will the process be easy enough for "most" users to do it themselves vs buying a new printer that comes from the factory ready to print color.
@@pushingplastic7445 what creailty told me that the upgrade will include all the parts required including the CMS i am waiting on the K2 and K2 plus coming out i alway wait and see how it doe's never rush into stuff it will bit you in the ass. here in the UK there a delay in getting printer by 3 months behind you guys in the USA.
@@nigel5823 Same thing I was told. My concern is that upgrading the K-series to color print via a kit might be beyond the skill level of some users.
How can i do the adaptive layer thing now?
In the top toolbar, Adaptive Layers is the icon all of the way to the right, it looks like a bunch or lines. Select your model, click that button. When the dialog box pops up slide the top slider towards Quality, .25 should be good. The further you move it towards quality the better it will look but the longer the print time will be. I hope this helps!!! Thanks for watching!
Creality print 5.0 is very good
I am getting faster print times and higher quality! (E3 V3 KE)
Same here with the K1 Max! I hope they get some of the other printer profiles done soon! I really want to see how they work!
@@pushingplastic7445 more print profiles would be nice! The V3 KE has one profile and it is 0.2mm layer height
I wonder if they plan on doing 0.1/0.3/0.38
Did you notice any difference in the vibration compensation with the KE pls?
@@jacobcauchi5933 it certainly seems to be running smoother than before! And it was running well before (KE)
The more I use CR Print 5.0, the more I love it! I’ve tried almost all of the slicers and this one just works perfect with the KE
I’m gonna do linear rails on the bed and make the gantry rigid, then here comes 500mm/s 😄
I cant find calibration tab lol
Click on the Creality logo in the upper left corner of the Creality Print screen. You'll find the Calibration menu there! Thanks for watching!
@@pushingplastic7445 lol i was just kidding from before, thank you!
Bill I enjoy your videos and your channel, however, I am not a fan of Creality Print.
There's nothing wrong with that! I try to put videos out for Cura, Orca & Creality Print. In fairness, I use to use Cura exclusively, then I gave Super Slicer a chance. I really liked that one. After getting an X1C and having to use Bambu Studio for that printer until Orca came along and covered all printers. I actually started using Creality Print because I wanted to check out the printer profiles so I could duplicate them for Orca. Sorry, kind of rambling on here with my trip down memory lane! I appreciate the kind words and I thank you for watching my videos! What slicer are you using?
@@pushingplastic7445 I followed a similar path to yours, except I could not afford a Bambu but finally got a K1 Max and moved to Orca at that point and not looked back. Keep up the great work!
Big shit!
I press slice....
Error the program is closed.
Very few options.
pathetic....
So you come here, post profanities and give it thumbs down? You didn't mention anything about your computer setup, printer, the size of the model or any of the settings you tried. That's kind of pathetic, don't you think?
Windows 11& Ender 5
Is this something unusual?
This slicer is pathetic....
@@1r3k1970 Actually the Ender 5 is unusual since it's not on the list of compatible printers yet and this is why you are experiencing problems. But even if you have an issue with the slicer, why hit the thumbs down on my video? I didn't cause your problems.
thumbs down??
Absolutely nothing. Old version or orca slicer and poorly executed as usual