Intro to Creality Print 5.0 - Install, Configure 3D Printer, Configure Filament, Slice.
ฝัง
- เผยแพร่เมื่อ 30 เม.ย. 2024
- Complete walkthrough, to download, install, and setup, CREALITY PRINT 5.0
Test Dog: www.thingiverse.com/thing:518...
Support my Channel, use these links:
Get the K1: shrsl.com/43yw2
Get the K1 MAX: shrsl.com/43yw4
K1 Nozzle Kit: shrsl.com/43yw5
Get the K1 Camera here: amzn.to/42EpDK3
Hyper PLA (Amazon): amzn.to/45rZTm1
Hyper PLA (Creality Shop): shrsl.com/46qeo
HP-Ultra PLA (Amazon): amzn.to/3OyuRSA
HP-Ultra (Creality Shop): shrsl.com/46qb1
Help this Channel continue to exist: Use my Links:
Amazon: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Anycubic: shrsl.com/4gssz
Sovol: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sunlu: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Send a TIP: Click the "💗THANKS" button, or Venmo.com/gregg-cerenzio
Become a Member, by clicking "JOIN", or this link:
/ @3drundown
Learn with me!
My 3D Printing Udemy Course:
3DRUNDOWN.COM
CURARUNDOWN.COM
BAMBURUNDOWN.COM
Support me via Patreon: patreon.com/3drundown
My "Must Haves" Amazon 3D Printer List: a.co/5RxTkYl
Upgrade your FDM Printers:
Get The Smart Kit Here: amzn.to/328eBDr
Get Cloud box, here: amzn.to/33fePJd
Get a Logitech Webcam Here: amzn.to/3JUpFFI
Get a CR-TOUCH Here: amzn.to/3oWhrnK
Capricorn Boden Tube: amzn.to/3FABHBp
Creality Official Metal Extruder: amzn.to/3JBeguj
Nozzle Cleaning Kit: amzn.to/3JsK307
Razor Tool, for easy Stubborn Print Removal: amzn.to/3pQ7Jnr
Find me on Facebook: / 3drundown
Find me on Instagram: / 3drundown
Find me on Etsy: GAETSY.COM
Have I helped you? Help ME continue this channel with some support:
TIP: Click the "THANKS" button
Become a TH-cam Member, by clicking "JOIN"
Support my Patreon: patreon.com/3drundown
Use my Affiliate Links when Shopping:
Amazon Link: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Support me via my Course: 3DRUNDOWN.COM
PLS HELP ME WERE CAN I FIND THE RAFT OPTION
Well done. Many thanks. Look forward to more videos.
Great video. Looking forward to learning more about Creality Print 5.0
Pop into this one!
th-cam.com/video/c1-gOxbuoZ8/w-d-xo.html
@@3DRundown Looks good, thanks!
Thank you this is great. This will help me retraction having trouble.
Thanks for the video! very helpful. Hope you will prepare more in-depth creality print 5.0 tutorials
Depends on how this video performs, and, it's looking good. I will have to delay several other plans, to do this, but, I may...
This is very helpful, thank you
Thanks for the video, it will be very helpful
Thank you for your tip.
Are you going to do a video on first layer colour change in creality print 5, I think that would be a good topic, I am using orca slicer for that feature, but would love to try it in creality print?
Thanks for sharing this video. Simple and beautiful. I'm a first timer in the 3D printing field and this video has given me the confidence to start my journey into printing files I create. Keep up the great work and content.
Be sure to catch my "Creality Print Tutorial" video ⭐️⭐️
Thanks a lot for this video!!!
Great job
Great video! Many thanks!
Catch my Followup CP5 Tutorial
Do you know if this works for the Sonic Pad? Waiting for my Ender 3 S 1 Pro (Sonic Pad) and Plus to be supported. Thanks. Laurie. NZ. 😊
No S1 profile yet
My Creality printers, an Ender 3 S1 and a CR M-4, are not listed in the Creality printers. How do we set up for them, or is it premature to use this for them?
They only have there Klipper profiles ready. But, those will come after more testing. I am going to make some profiles, as I can. Probably CR-10 SE next. I do think they need to prioritize this. Hopefully they are
after setting my nozzle to hardened steel for the 3v3 and saving renaming it i tried to do the same for my k1c but when saved it reverts back to nozzle not unknown
Well Done!
Thank you! Catch my Tutorial also
No Ender 3 V3 Se option yet. I tried the KE option but some of the temps are off. Like the bed to is set to 50c.
They are probably all set to 50. Pop it up to 60
Ready for their colour, 350 x 350 x 350, enclosed, fast K2 which will be out in June or July
The K2 looks insane!! It's the size of a 5+. This is game changing
Thanks!
Very welcome, and thank YOU. 🙏🏼
So I finally got myself together and got creality 5.0...
Holy cra.... a huge difference. I am drooling haha! :D
Hmm would you also recommend setting the bedplate temp to 60 when using Hyper PLA? Just like you, Hyper PLA is my go-to PLA.
A bit annoyed that I cannot find the skirt choice under bed adhesion settings. Wonder if they removed that specific adhesion?
Yes. 60 always. The Skirt is there. Check my Creality Print 5.0 Tutorial video
@@3DRundown will do :)
Hello, I looked at the Github for ages yesterday and couldnt find the how to install it. Thanks for showing me where the download button was!!! Reading through the features in the git hub Adaptive layers are mentioned but I don't see them anywhere in the settings, any chance you can point me in the right direction? Are you going to be doing videos on new features and their applicaiton?
welcome. Github hurts my brain. I am swamped with things I'm expected to cover, for various people, ontop of my own plans, but, I'm going to try my darnedest to cover this more.
If you look at the top row of icons it’s the last icon but you need to have your model selected for it to appear.
@@JustAlb1n Thank you so much, with my monitor I cant make it appear as the settings menu hides it but if I hover over where it should be i can still click it!!!!
@@edgarlopez-negrete1391 your welcome, how’s the slicer working for you ?
Can you mke a video just explaining supports? am having trouble with custom supports and i cant find a way of making them work with verion 5 and k1 max
👽👽👽👽👽👽👽👽👽👽👽
Thanks for sharing your knowledge.
Very interesting video, I hope you will make more about using version 5.0. I can't find the Enable Gcode Offset (Z) button in the new slicer V5.0. The Gcode Offset (Z) is fixed at -0.05mm in the Experimental tab in version 4.0. Can you help me?
Download 5.0.3 and check out my "Creality Print 5.0 Tutorial", for starts
Great video.
K1C and KE user here. V5 not generating supports for some odd reason.for me anyway. Deleted and reinstalled a couple of times already.
Somebody else had this. I resolved it for them. Trying to remember what it was. Check my 5.0 Tutorial video incase helpful. It's very detailed
@@3DRundown thank you. Have watched all thr videos you've released for CR-Pv5.0. Also downloaded v5.0.2 but still the same issue
i have a cr-10 s how what printer do i put?
I have a 10 S. I'll have to check it out, but, I'd look to set it up like a CR10-V2, with the ABL line in the GCODE.
Do you know when 5.0 is coming out for Mac?
I don't. Hopefully soon.
Thank you for this tutorial. But the funny thing is that I can't find bed adhesion like skirt, brim, lace and raft. I also cannot find the infill patterns as in version 4.3.38
I'll try to cover more on Creality Print, in the Coming days. These videos take allot longer than it may seam, to make. I'll do my best to do more tutorials. Consider being a member. :)
@@3DRundown
Thank you in advance for this, in the meantime I will of course also look into the options myself. When you use the search option you will only find brim.
Catch my new video. I covered that for you. :)
Great video. I don't see the point in printing from Creality Cloud personally. I just send it over LAN to the printer.
Creality Cloud will store all your file in your cloud account. You can then reprint at any time to any compatible printer. It will create a time-lapse. You can remotely control, monitor the printer and camera feed. All through the App & the Website. It's very nice once you get settled into it's work flow
Overture ASA would not stick to my K1C's smooth PEI (with glue). It sticks well on the textured PEI build plate I bought on AliExpress for $9 (which also has a carbon fiber patterned PET surface on the flip side). Neither side has the slicone brush of the original K1c plate, but the K1c adjusts gracefully to that, automatically checking and verifying the brush is not there, then carefully wiping the nozzle directly on that area of the build plate.
Smooth PEI has epic adhesion. Far better than textured. Keep in mind, the glue isn't for adhesion. It's for bed protection. I feel like maybe you overdo the glue. Speaking of glue, the Bambu Liquid glue is amazing on glass and smooth pei
I've had very little problems with abs or asa sticking to the creality smooth plate the K1 came with. I also got their textured plate and it works well too. I have also used Overture's nylon on the smooth plate to print some funnels, zero problems, I was actually shocked.
K1 Smooth plate is amazing. This is what made me try one on my P1P and P1S, which I almost got rid off. Best thing ever. This one: shrsl.com/4ijn5
@@3DRundown PLA and PETG stick to the K1C smoothplate (with gluestick) quite well. Less so for ASA. Maybe if I washed off the glue, ASA would stick better.
Keep in mind, glue stick, is not for adhesion. It's to protect the bed. Go *very* light when using it, or, skip it. Best bed glue is the Bambu Green Liquid. Holds amazing
Hey, great video :) i have creality 5.0.0 but when i look to the quality preset i have only the standard 0.2mm preset and not the others like quality. How can i have the others presets ? (edit: i have the ender 3 v3 ke)
It's right under "PROCESS". The pulldown menu.
@@3DRundown Yes I know but when I want to change it, I have only the choice of Standard. Maybe it's specific with the ender 3 V3 ke and it is not available for now
Yes. I have confirmed that is currently the situation
creality 5 just does not work with my ender 3 v3 se any ideas? I saw you posted a setup video for that but it has been removed? Is cp5 just not compatible yet?
There was a mistake in the video. I moved it to the members feed (and may have even deleted it from there). However, my SE profile, is available to all Members and Patreons. All you'd need to do, is import it. Also, I am told the newest CP5 update, added an official SE profile
@3DRundown awesome thanks I'll have a look I just uninstall and stayed with the older version as it's working ahah
I would 1000% escape V4 for V5.
I'm having the same problem. Installed the very latest v5 from github and NO support for V3 SE. ;-(
on their Github page I read "Currently, Creality Print 5.0 is compatible with the following models: K1, K1C, K1Max, Ender-3 V3, Ender-3 V3 KE, Ender-3 V3 SE and Ender-3 S1 " I have the Ender 3 S1 Pro but it isn't listed as an option under printers in 5.0. Maybe later ??
Hopefully they will expand to the older machines asap.
Ender 3 V3 SE was also not an option.
Only Klipper machines so far. But, I posted an SE walkthrough today
is Flow Ratio still in % , noticed it has a decimal
I haven't gotten to look at that, but I would think yes
hey I just updated to 5.0 but I have the Se and dont see it listed dose this mean they will not add it or is it just becouse its still new ? will the Ke profile work with the Se ?
No, SE runs Marlin, KE runs Klipper
I have not been able to work with it yet, but, I would choose the KE, then switch the config, to Marlin
@3DRundown ok I will give that a shot thanks I know people are saying it's still in beta but I'll like to try it out it looks amazing.
@@Mr360alanhey, how'd it work for you??
@voongnz not good I'm sticking with orca slicer for now. I check every 3 days but so far the Se is still not on it.
noticed that the print speed has gone up for some of the test prints for example the benchy before on the k1 took 15 min now takes 28 min
Try Hyper pla profile
Just installed creality print v5 for my new printer but its not setting the print temps or cleaning the nozzle before printing.
This is frustrating
Perhaps this video will be helpful: th-cam.com/video/c1-gOxbuoZ8/w-d-xo.html
Nice video. Why can't creality make normal auto updates? or downloading from their site for now is only up to version 4.3...something, as is the same for auto updates on creality print. Just updated todays to a better version of 4.3..smthg , and it says i'm up to date. Need to check how many versions i missed :D
They finally added new top and bottom shells as orca slicer has. Very nice. Was using orca for that and sometimes better supports and now I don't need orca slicer at all.
And print time improved on a 4 hour print with default settings on 4.3 version , to 3h20m on a 5.0 version. Love these free software improvements. It's just that v3KE only has one 0.2mm profile now. Still... At least I can use the software.
They need to fix that, but, I can't remember the last time I used anything but 0.2
I got that V4 update also. I suspect they will make the full move to 5 after some community feedback.
How to change the print speed in the new one?
I will cover this more soon. For now: Watch this video: th-cam.com/video/wtj7GP_rIO4/w-d-xo.html
I tried it But the click spots are off by a quarter inch on my display making it a PITA to use Tried changing resolution frame rate nothing Guess ill wait for the version with the repaired graphics
??
Same issue here, also had issue with previous version
I have the same problem. Contacted Creality yesterday with screenshots. They acknowledged the problem and are working on 5.0.3. Hope this works
Having the same issue is definitely a big let down
So obviously they dont have many of their printers available for 5.0. I was having issues with the original Creality Slicer that I had. My printer kept getting an emergency shutdown code from the firmware/slicer. I saw someone say that there was a new Slicer update, which in turn was the 5.0. I downloaded the update and everything just went crazy. I couldnt select my Ender 3 s1 Plus so it was practically a terrible thing for me to do. I have uninstalled everything and trying to figure out which program works best for my printer. I appreciate all that you do for the 3D printing community and hope TH-cam and others surely help keep your lights on good sir.
1st, go to GITHUB, and download the latest CP5. I believe we are still on 5.0.3. I have profiles for the S1+ on my Patreon, and my Member feed. Hop in and grab it. Memberships start at like $3. Creality Slicer is absolute trash. Don't use that.
I was using Creality but moved to Cura. I got cura working ok so far and doing a test print. I'll keep you posted. Thanks again good sir
Ok so I am still having this problem. About 40 minutes into the print im getting Shutdown due to webhooks request. I'm thinking the printer is overheating internally. When the printer has been sitting off for quite a few hours and I first get it running and printing it works wonderfully but then this error happens. I restart immediately and continue the print which then works for about 10mins then this same error happens more and more frequently as I continue to restart the printer and continuing the print leading to the print shifting in upper layers. Any idea whats going on here?
Are you printing from Creality Cloud or a Memory Card? Have you tried with a different memory card? Are you printing from Sonic Pad? If you are on Sonic Pad, change your USB Cable, and use a 5V Blocker.
This cable: amzn.to/4cjbirH
This blocker: amzn.to/3KNdWtT
I do not see a download foe Mac OS… Help please🤷🙏
It's not there.
@@3DRundown thank you… I am a su so if you run across the 5.0 for Mac OS, I would appreciate a heads up. Keep up the great work (it goes well with the hat…😊)…
All power to the Hat!
It’s not available for the Apple I tried looking for it.
just updated and still blue?
Should be green and show the new splash screen and logo. It doesn't remove V4. Make sure actually opened V5
Hope they gonna update soon and add other printers like my Ender 3 V2 Neo :/
I'll try to make you a profile for it. I do need to post it in my Member feed and Patreon feed, for a few reasons. I'll try to have it done this week.
@@3DRundown thanks you the best!🙌🏼
DONE! Test it and lemme know how it goes.
@@3DRundown works like a charm👍🏼 also greetings from Germany 🇩🇪
5.0 does not include the [C] series printers, such as CR-10 se.
Not officially, YET.
No, Apple version ?
not yet
Can anyone help me out with my ender3 v3 se stock settings
I have a profile on my Patreon, and here in the Members feed. I know that sounds petty, but, I gotta do what I gotta do, to keep my lights on, and this channel afloat
Question it doesn’t show my printer I have a Ender 3S one plus I don’t see it. I want to add my printer and my other creality.
Only Klipper machines so far. Might be able to adapt my SE profile to the S1+
@@3DRundown how do adapt? are they same profile ? Is the retraction the same on all creatily machines just wondering.
No, there will be differences, depending on the Extruder, but, most DD machines, have similar retractions. I have an S1+, I will see about adding it to CP5.
Thank you
lol cr-m4
This isn't working for me. When I select the K1C printer and go through all the settings, when I exit and reload the software it's forgotten the K1C and asks me to install Ender printer. I don't have an ender. This is garbage. Off to Orca.
This morning, all my K1 Models, are gone, and not available to add back. The only one that stayed, is the new profile, I made during this video. Looks like, some bugs need to be addressed.
@@3DRundown Yup, same happened to me also. My K1C profile vanished and cannot add it back. But all the Chinese lettering has gone, so that is one good thing I guess.
Yep. That is my exact scenario. The Chinese is gone, but, so is the K1 lineup. I am not sure what's going on, but, gonna need a solution, pronto. Fortunately, I modified my K1, for the Video, and, that profile stayed
@@3DRundown I ended up reverting to the previous version of Creality Print. It's a pain, but it works for now. Or I slice models in Cura, save as STL, then load up in Creality Print v4 and print. Cura doesn't support K1 lineup either.
All the K1 machines are now back, and updated, in CP5. Also, ORCA support K1 as well.
Hi
Can you tell me how to change the Z offset in version 5, I don’t seem to be able to find it.
Thank you for a great tutorial.
Z-OFFSET is done at the printer, not in the slicer. Never change it in the slicer (Which would be done via Klipper GCODE). DO NOT DO THAT.
I don’t know how to add a printer. It’s not listed or it doesn’t give you an option to add a printer.
is very rare slicer, in mew, but my v3 SE is not there, only v3 KE
How to Setup "Ender 3 V3 SE" on Creality Print 5.0. Full Profile Walkthrough.
th-cam.com/video/wtj7GP_rIO4/w-d-xo.html
4:23, I don't understand Creality, I've got an Ender-3 V3 SE, which is NOT listed.
The SE is indeed available on the latest version of Creality Print 5.
@@3DRundown Nope, I re-downloaded and re-installed version 5.0.0.8636 (latest available for download at this moment) and it does *NOT* contain the SE version.
You are running an ancient version of CP5. Many versions behind. You should be on 5.3. Get it here: github.com/CrealityOfficial/CrealityPrint/releases/download/v5.0.3/Creality_Print-v5.0.3.8736-win64-Release.exe
@@3DRundown Thank you so much! Crazy that they don't list that one on their website, I did not know they were on github. Thanks again!
@@3DRundown I'm going crazy here! I just downloaded from github version 5.0.3.8736, installed it, ran it, but AGAIN the ONLY printers listed under 'Add Printer' and Ender are : 'Ender-3 V3 KE' and 'Ender-3 V3'. The SE version as I *did* see listed in the latest CP4 version is STILL NOT there. WTH?
why wont this software open full screen on my computer
Dunno. Latest version? (5.0.2)? Working ok over here
I have the same problem. Contacted Creality yesterday with screenshots. They acknowledged the problem and are working on 5.0.3. Hope this works
Mmmmm 19:15 personally I wont use Creality Cloud, instead just walk it over to the Sonic Pad ? or printer on my usb stick. Laurie. NZ. 😊
Whhhhhhy. Use Creality Cloud! Or, login directly to your Sonic Pad and send the file
Looks a little like bambu Slicer
Indeed. Orca/Bambu. It's good to see some unity between the 3
4:03 *Chinese. They're a Chinese company.
Really? Is that where my friends from Creality, come from, when they visit me? I had no idea.... Thanks for clearing that up
For now, it is very slow, crashed sometimes and not supporting older printers. Not good for everyone!!
Klipper machines so far. Make any profile you'd like. Not running slow here, and No crashes for me.... yet. Time will tell
@@3DRundown I have CR-10 SE, which is Klipper, but I don't see its profile in CP 5.0.
It's not yet. I hope to make a profile soon
I'm a bit disappointed with it so far, it's not quite as user-friendly to me.
Heck, somehow they screwed up the file naming format when you export your gcode, now it shortens the file name making your files unidentifiable on older printers.
It got worse, I just tried to print a 6.5 hour print, the timer on the printer was estimating 30 hours.
And with that goes the last bit of trust I had in 5, I have now switched back to 4.3.5.6984, even with it's occasional crashes it can at least do it's job simply and consistently. Maybe I'll try 5 again in several months after they update it a few more times. ☹
Start here (and get 5.0.3) Creality Print 5.0 Slicer Tutorial: Support Painting, Mouse Ear, Infill, Walls, Temp, Speed, more.
th-cam.com/video/c1-gOxbuoZ8/w-d-xo.html
CURAlity. 😃
Creality Print is nothing like Cura. Closer to Orca and Bambu, which copy from each other and Prusa. "Creality Slicer", was an old Cura
That is Chinese not Japanese...OOF
No Shit.
I have been working with 3D printers for 6 years. This is probably the worst slicer.
6 years? Who cares. Means nothing. I made 50K my 1st year in 3D Printing. You "probably" a troll. 🤷🏻♂️
oh, that's a really clever one. can you show me the function for changing the filament in layer x?