Chevy impala 2009 here. My car wont budge when in drive ir third gear. It just sits and revs when pressing the gas pedal. I was able to slowly drive it in 1st and 2nd gear though. Any thoughts? Also no lights on the dash
I have a 2009 Impala 3500 V6. No check engine light. The car only drive in Reverse, 2 and 1 Gears. It does nothing on D and 3. However, when I pull the transmission fuse out, Everything works except that the check engine light comes one and I have a light jerk when I shift to reverse. What could be the problem. Thanks
sounds like your differential may have gone bad. I had the same problem 2years ago and have to get my transmission rebuilt cause i kept trying to drive it
I have a 2006 Impala SS w/148,000 miles. I just noticed that it is now starting to have issues with the trans. When I first start it up and go to turn out of the driveway, it tends to stutter, so I turn off the TC (traction control), which appears to stop that from happening, and I leave it off. But, while I am driving sometimes I notice it hesitates when I am maintaining a steady speed, or when I have to give it some gas (not a lot) to get up a hill. No codes are popping up for the trans. I have had the trans flushed and keep an eye on it all the time. It isn't my daily driver and I have had this one Since 2010. I have searched different forums, and I have yet to find someone with the same issues as Mine. Any thoughts? Thanks Eddie
hey Eddie, just find your videos. have one question I have 2012 impala 3.6 engine 160,000 mi. owned it 2 yrs. sometime after stopping at stop light and go to pull away from stop ,there is a grinding noises and hard bump then ,it runs great for days then sometime it just makes that sound and does not seam to move then a bang noises and its runs great. have ask some mechanic but no one and come up with answer. do you have any ideas? thanks wayne
sounds like a valve stuck in the valve body. If stuck that can cause a delayed in pressure to the clutch packs. The bang your hearing is probably the transmission banging into gear at higher rpms. You can try a fluid drain and fill with a transmission fluid additive to see if it free that valve up a little bit.
Chevy impala 2009 here. My car wont budge when in drive ir third gear. It just sits and revs when pressing the gas pedal. I was able to slowly drive it in 1st and 2nd gear though. Any thoughts? Also no lights on the dash
Currently have my mechanic looking at something similar where the stick shifter stop corresponding to the p r n d l setting accurately.
Probably have a shift cable problem
I will let him know Monday morning when they open up again. Lost two days of errands around town during "diagnosis"🙄
I have same issue I'm in georgia...can you buy mines...it's having same issues
I have a 2009 Impala 3500 V6. No check engine light. The car only drive in Reverse, 2 and 1 Gears. It does nothing on D and 3. However, when I pull the transmission fuse out, Everything works except that the check engine light comes one and I have a light jerk when I shift to reverse. What could be the problem. Thanks
sounds like your differential may have gone bad. I had the same problem 2years ago and have to get my transmission rebuilt cause i kept trying to drive it
I have a 2006 Impala SS w/148,000 miles. I just noticed that it is now starting to have issues with the trans. When I first start it up and go to turn out of the driveway, it tends to stutter, so I turn off the TC (traction control), which appears to stop that from happening, and I leave it off. But, while I am driving sometimes I notice it hesitates when I am maintaining a steady speed, or when I have to give it some gas (not a lot) to get up a hill. No codes are popping up for the trans. I have had the trans flushed and keep an eye on it all the time. It isn't my daily driver and I have had this one Since 2010. I have searched different forums, and I have yet to find someone with the same issues as Mine. Any thoughts? Thanks Eddie
Your transradiator cooler is mixing radiator and transmission fluid together
hey Eddie, just find your videos. have one question I have 2012 impala 3.6 engine 160,000 mi. owned it 2 yrs. sometime after stopping at stop light and go to pull away from stop ,there is a grinding noises and hard bump then ,it runs great for days then sometime it just makes that sound and does not seam to move then a bang noises and its runs great. have ask some mechanic but no one and come up with answer. do you have any ideas? thanks wayne
sounds like a valve stuck in the valve body. If stuck that can cause a delayed in pressure to the clutch packs. The bang your hearing is probably the transmission banging into gear at higher rpms. You can try a fluid drain and fill with a transmission fluid additive to see if it free that valve up a little bit.
Brought a 2008 impala. Drive Tran runs dynamite. 149k miles. Trans fluid still great color no burning.
I just bought a 2007 Impala. 105k miles. It's got a small jump in the tranny which my mechanic friend said isn't a big deal. Runs great otherwise.
My 09 impala only drives in 1st n 2nd gear. No codes. No check engine lights. Please help.
Mines doing the same…any update
@@robertnewmiller9634any updates mine doing the same thing
If you bought an Impala that was currently running good, what could you do to prevent this? New transmission filter and fluid with no flush?
Driving my Impala and the transmission just quit pulling just like it had lost the transmission and it didn't any ideas
My Trans is slipping in mine