I saw your other comment too! 🤘🏼 I have a few more things to do including the SPC links and arms, welding up all the Eimkeith goodies and new skid plates. Then I’m going to try and get a lot of those fun Offroad videos for you
A tip for getting the nut and bolt started for the 2 holes you have to drill. Grab the correct sized box end wrench and put a piece of tape on one side so the nut doesn't just fall though. It should be pretty easy to line up with the bolt afterwards since you can now hold it in place!
Nice work! Looking real good. I’m surprised the 3rd gen doesn’t have a rear cross member like the 4th and 5th gen. That cross member is quite limiting the departure angle on newer models
Would it help to wield these bumpers back on? I have a 5 gen 4Runner. Also on the website under body lift option, is that the measurement for the side bumper?
It’s going to be about 17 weeks. @amg_t4r on IG told me he paid extra to have them rush it. I was able to get mine rushed to me in 2 weeks but I’m not sure if that’s something they normally allow
@@michaelalvarez8840 here’s a link to full built headlights and also for DIY parts: snowboundcustoms.shop/products/96-02-3rd-gen-4runner-led-retrofit-headlights snowboundcustoms.shop/products/h4-diy-led-retrofit-kit-new-b3-v2-0-projectors
@@SnowboundCustoms thank you so much . Hopefully I don’t botch it to bad ! Don’t get on my case I know you pay for what you get but I’m not really trying to break the bank . Found these projectors on Amazon , wondering what’s your take ? 2.5Inch Honeycomb Bixenon Projector Lens LHD Projector Lens White & Red LED Angel Eyes Shrouds Mini H1 Headlight Replacement fit for H1 H4 H7 Car Retrofit…
@@michaelalvarez8840 you really get what you pay for when it comes to projectors! I don’t think the light output or quality of a cutoff line is any good any eBay/Amazon projectors
Finally a new video! I love how you actually use your 4Runner for what it’s meant to be. It’s not a mall crawler.
I saw your other comment too! 🤘🏼 I have a few more things to do including the SPC links and arms, welding up all the Eimkeith goodies and new skid plates. Then I’m going to try and get a lot of those fun Offroad videos for you
A tip for getting the nut and bolt started for the 2 holes you have to drill. Grab the correct sized box end wrench and put a piece of tape on one side so the nut doesn't just fall though. It should be pretty easy to line up with the bolt afterwards since you can now hold it in place!
Thanks for the tip! That’s a great idea
Running the addiction with a swing spare tire. I am digging this bumper might have to make the switch later on in the future but I need my spare tire.
Real smooth man. Got a couple things ahead of it but this will be my bumper! Good video, subscribed 👍
Glad you liked it!!!
Looks so good man!
That’s a clean bumper! 🔥
awesome rear bumper . I think Im gonna order one
Do it 😜
Nice work! Looking real good. I’m surprised the 3rd gen doesn’t have a rear cross member like the 4th and 5th gen. That cross member is quite limiting the departure angle on newer models
Doesn’t hurt to cut it out right 😜
Looks great. Do you think the “wings” or the bumper, immediately behind the tire can support the weight of the vehicle in the instance of a drop?
Will this bumper fit even with the tow hitch attached???
Would it help to wield these bumpers back on? I have a 5 gen 4Runner. Also on the website under body lift option, is that the measurement for the side bumper?
I need to get one in the UK!
Can u still use an aftermarket receiver hitch with it? Thx
What kind of rear tail lights do you have?
Hey bro can you tell me what product you use in your paint to get that shiny gloss, looks so clean even after you rock crawl with it. 💪
Lol it’s just the lighting. I probably have worse paint than 90% 4Runner of owners
I have one too! 🤘🏻
Hey I shipped something to you btw 😝
Or does it come with the option of attaching a tow hitch reciever???
It does have two recovery points but it does not have an option for a tow hitch receiver
How long did it take for them to finish your bumper? I ordered one couple weeks ago, pretty stoked.
It’s going to be about 17 weeks. @amg_t4r on IG told me he paid extra to have them rush it. I was able to get mine rushed to me in 2 weeks but I’m not sure if that’s something they normally allow
who makes your front bumper?
Looks awesome man! Just wondering if you’re going to relocate, replace or chop the exhaust so it doesn’t look like it’s hanging down
Yup I will be doing that! Not sure what I’m going to do yet
@@SnowboundCustoms I say side exit I got a side exit on my 98 with a flowmaster super 10
@@Stormtrooper_98Trd send me a pic on Instagram
@@SnowboundCustoms sent
I personally have the magnaflow overlander and it's awesome!
There shouldn’t be a gap that big on the top frame bolt, I’d bring it up to Nguyen bros. You’re putting to much stress on the lower frame bolts
yea if I were him I'd stack some washers in there. That's no bueno.
Where did you get your front bumper, link?
Most of the build list is in the description. It’s an addicted offroad bumper
What is your front bumper?
What is your head light set up ?
The shrouds are turbines with a rear halo
@@SnowboundCustoms built yourself ? You have a link ? Love your set up . I’m going to TRY to build my headlights
@@michaelalvarez8840 here’s a link to full built headlights and also for DIY parts: snowboundcustoms.shop/products/96-02-3rd-gen-4runner-led-retrofit-headlights
snowboundcustoms.shop/products/h4-diy-led-retrofit-kit-new-b3-v2-0-projectors
@@SnowboundCustoms thank you so much . Hopefully I don’t botch it to bad ! Don’t get on my case I know you pay for what you get but I’m not really trying to break the bank . Found these projectors on Amazon , wondering what’s your take ? 2.5Inch Honeycomb Bixenon Projector Lens LHD Projector Lens White & Red LED Angel Eyes Shrouds Mini H1 Headlight Replacement fit for H1 H4 H7 Car Retrofit…
@@michaelalvarez8840 you really get what you pay for when it comes to projectors! I don’t think the light output or quality of a cutoff line is any good any eBay/Amazon projectors