Thanks for letting some great TH-camrs get involved in giving you some great Advertising videos. Not only do grind hard do some Amazing work with what ever they put there hands on they bring great videos for us to watch. Just like puddings fab shop who was in the group picture at the convention. He also did a great video Advertising for you on his channel. And that was great to walking around your store. THANKS AGAIN ❤
@@GrindHardPlumbingCo pm me I want to ask how you I can make a brute force 650 adapt driveshaft into a chain cause I want to swapped to motor and put chain motor on it?
I'm surprised you guys havent made a heat exchanger for the woodstove yet and run hoses to a radiator on the opposite end of the shop with a fan. I'm sure you have all the stuff around the shop somewhere to rig somethin up. Would help keep it a lot warmer i'd think, better utilization of the heat you're already making. Maybe like a few dozen feet of copper tube wrapped around the chimney, or even just something to sit flat on top of the firebox
Just a couple of those peltier fans on top would probably help a lot. Though, building a heat exchanger and feeding a big tank of water would be pretty baller. That would stay warm for hours after thefire is out.
I was looking at my 'account' to see if I could send them a couple "heat activated fans" and realized I may want a hamburger cooked at a store instead,and decided a loaf of bread for my bologna was best.They need Will to do his 'push-ups' in front of the heater instead...
That was so much of a blast from the past for me, these came out after my childhood... but still. The cool kids got go-karts for Christmas. The real cool kids got bodied go-karts for Christmas. In the 70s and 80s the van and pickup body go-karts were very popular gifts for kids.
I'm a van guy so I'm digging the van go cart body . Awesome work and video. Thank you guys for doing what you do love your channel. I'm a long time subscriber.
it is currently 85 degrees in arizona as I'm watching this, I'm amazed that its still so cold where yall are at, but as someone whos done race car and fiberglass/composite work for 3 1/2 years before i got injured, you seem to have done a pretty good job doing a nice quick patches and repairs on the body. Using the tape as a backing is something i had to learn on my own to bridge simple holes but you seem to have thought about using that way faster than i did, when you do that though its always best to do a nice wet down of resin on the tape/area before you lay the glass down to prevent the air bubbles you got. All in all, 8/10, good job.
Y’all been sitting on this gem for a minute. Dream camper on wheels and tires still. But I enjoyed seeing the wheels that made me subscribe to you guys. The original pink mustang followed by the death scooter. Man you guys have come a long way. I’ve enjoyed every video since.
Grind Hard Plumbing Co PREMIUM content for the big kid in all of us. I am so glad I subscribed to this channel and I enjoy all the designing, fabrication, testing and general wholesome fun content.
You guys never disappoint. I hope ya get started building that big shop/studio soon. I mean, look at C&C... You're builds are all on another level from them, and check John's big shop out. ...Turn the first shop into a mini GHPC museum... Make the upstairs studio area in the new building, have an awesome view of your place.....Maybe a top deck roof, with railing all the way around...... (Impress guests with cool views of vehicles ripping around your course, wildlife, and provide an excellent location to fly drones and operate cameras from........and have parties on....Fire tables... bar...I can imagine some summer nights hangin out up there, already. A large rooftop deck at treehouse level? Rope bridge between? ...and zip line? ...that also goes to your house??? 😂....Rope bridges made of split wood, and paracord are badass.)
These video's are a real joy to watch. The content is amazing, the editing is perfect, the music is fitting, the video quality superb 👌 Props to the team! One of the better out there imo! ❤
Aloha Ethan. This episode was a tad nostalgic for me when I heard "20 below zero". Wife and I are Hawaiians that as newlyweds wanted to try a change of scenery so of all places we chose McCall, Idaho which at the time (1981) was a sleepy little town of 2000. Our Hawaiian winters get down to a bone-chilling 60 degrees in January. I remember it getting down to 20 below zero in the dead of winter in McCall, but we were very well acclimated so evening walks in 20 below temps were enjoyable as long as we didn't breathe too hard, and freeze our throats. McCall I believe now has a population of 14,000, so not as sleepy or little as back then. Mahalo nui for a walk down memory lane. 😉🤙
Your content is amazingly fun to watch and me that's been to most of the states but never new idaho has a beautiful mountain view as well is a plus iv lived in maine and Oregon and realized I need to visit every state
Now I fully understand how much suprise videos are on all of your ssd's. I saw the barbie camper not complete. Snow and no snow. I love to see whats your next suprise vehicle video.
You guys REALLY need a heat reclaimer on your shop stove flue pipe. We have multiple wood burning stoves in our home with Magic Heat, heat reclaimers. They help A TON
this is the most under rated build channle on youtube! love all the crazy suff yall come up with! cant wait to have my own shop to be able to build my ideas like yall do! thanks for the great content!
"Now we gotta chop it down a second time!" Probably one of the funniest "In the moment" things to say when a tree re-plants itself after you chopped it down.
I use a shop with wood heat, go to hobo freight or somewhere and get a decent size shop fan, play with the angle of the fan you'll notice a HUGE difference in how your shop is heated with a little circulation
What do you guys do about your heat and painting? I got some rims I wanted to paint but was worried about the heat and the fumes. Do you guys shut your heat down when you paint?
Throes were sold in the Hot Rod magazine to the 90's with all kinds to order and engine set up. I had a gocart company in town that sold cool one's in the 80's I had a Sprint car and my brother had a nascar gocart. With full fiberglass body with two stroke engines I think 125cc or 80cc or good old 6hp
Thanks for helping us bring a piece of our company history back to life! ☘
Now stop dicking over your employees with shitty managers 😂
Thanks for letting some great TH-camrs get involved in giving you some great Advertising videos. Not only do grind hard do some Amazing work with what ever they put there hands on they bring great videos for us to watch. Just like puddings fab shop who was in the group picture at the convention. He also did a great video Advertising for you on his channel. And that was great to walking around your store.
THANKS AGAIN ❤
Sounds like O'Reilly should supply GHPC with an endless supply of blinker fluid, but don't forget to ask if it has AC before looking up part number.
Thank you guys for trusting us with this!
i like the idea of sending them a case of turn signal fluid
Thanks for letting us take part in this amazing project!
We couldn't have done it with out you!
@@GrindHardPlumbingCo
Planning a journey to another TH-cam summit soon ?
😊
It was awesome meeting y’all at the convention! Proud to call y’all my friends!
Yewww
Heck yea, a collab I'd love to see. I bet they'd love the towrolla.
Sir Puddin Tang, Pott county legend my guy.
@@GrindHardPlumbingCo pm me I want to ask how you I can make a brute force 650 adapt driveshaft into a chain cause I want to swapped to motor and put chain motor on it?
YALL need to do a get together bud and make a Datsun go cart
I'm at a loss for words in how sweet this channel is. Keep up the great projects!!
Here's a word: Premium.
@@nathanielscholtens2812 Premium 👌
I'm surprised you guys havent made a heat exchanger for the woodstove yet and run hoses to a radiator on the opposite end of the shop with a fan. I'm sure you have all the stuff around the shop somewhere to rig somethin up. Would help keep it a lot warmer i'd think, better utilization of the heat you're already making. Maybe like a few dozen feet of copper tube wrapped around the chimney, or even just something to sit flat on top of the firebox
Just a couple of those peltier fans on top would probably help a lot.
Though, building a heat exchanger and feeding a big tank of water would be pretty baller. That would stay warm for hours after thefire is out.
Also good content
I believe they're going to be building a new shop so I'd wager their motivation to improve the current shop is pretty low.
I was looking at my 'account' to see if I could send them a couple "heat activated fans" and realized I may want a hamburger cooked at a store instead,and decided a loaf of bread for my bologna was best.They need Will to do his 'push-ups' in front of the heater instead...
Thanks for making clean content that both my 3 1/2 year old son and I can watch and enjoy together!
Keep up the great work!
Glad I got to hear your interview this morning so this video and it's delay makes sense. Keep it up guys 😊
Loved it. Taking it back to its original livery was the best option.
So glad to see you guys are finally getting around to this! Glad it went to a good home
That was so much of a blast from the past for me, these came out after my childhood... but still.
The cool kids got go-karts for Christmas. The real cool kids got bodied go-karts for Christmas. In the 70s and 80s the van and pickup body go-karts were very popular gifts for kids.
Awesome job again guys - glad you got to meet Puddin as well!
Thank you guys for always making good content
"well if it's gone that means it's somwhere!"
bless this man's positive outlook on life
I love that all the old projects and parts just get left outside truly the grind hard way
Holy Moly Guys that is one sweet looking van!! Way too go. Really sweet looking wrap Job !!
you guys are premium, new fav channel.
7:30 absolute best part of the ad read.
I'm a van guy so I'm digging the van go cart body . Awesome work and video. Thank you guys for doing what you do love your channel. I'm a long time subscriber.
it is currently 85 degrees in arizona as I'm watching this, I'm amazed that its still so cold where yall are at, but as someone whos done race car and fiberglass/composite work for 3 1/2 years before i got injured, you seem to have done a pretty good job doing a nice quick patches and repairs on the body. Using the tape as a backing is something i had to learn on my own to bridge simple holes but you seem to have thought about using that way faster than i did, when you do that though its always best to do a nice wet down of resin on the tape/area before you lay the glass down to prevent the air bubbles you got. All in all, 8/10, good job.
Nice Resto!!!
You guys met Fred and Dave!!!
SICK!!!!
LOL 7:54 IN, Look over his back. Winnie the Pooh tubing bender...great video. Love the style on that van. Much peace to you all
You guys have the sickest place to ride. Whether it’s snow or HOT. You live in the best place!
That was very wholesome , & fine production values , thank you .
I always love the doggo shots in the videos. ☺
Gotta love it when Grind hard posts
Y’all been sitting on this gem for a minute. Dream camper on wheels and tires still. But I enjoyed seeing the wheels that made me subscribe to you guys. The original pink mustang followed by the death scooter. Man you guys have come a long way. I’ve enjoyed every video since.
the shots in the forest are so cinematic! and also... i want that gokart for my little brother :DD
I worked 12 great years for O'Reilly. What a great piece of the company's history!
Vantastic !!
Cool video and home run on fab and wrap!
Grind Hard Plumbing Co
PREMIUM content for the big kid in all of us.
I am so glad I subscribed to this channel and I enjoy all the
designing, fabrication, testing and general wholesome fun content.
You guys never disappoint. I hope ya get started building that big shop/studio soon. I mean, look at C&C... You're builds are all on another level from them, and check John's big shop out. ...Turn the first shop into a mini GHPC museum... Make the upstairs studio area in the new building, have an awesome view of your place.....Maybe a top deck roof, with railing all the way around...... (Impress guests with cool views of vehicles ripping around your course, wildlife, and provide an excellent location to fly drones and operate cameras from........and have parties on....Fire tables... bar...I can imagine some summer nights hangin out up there, already. A large rooftop deck at treehouse level? Rope bridge between? ...and zip line? ...that also goes to your house??? 😂....Rope bridges made of split wood, and paracord are badass.)
Thanks!
Thank you for the support!
Whaaaaat!? I see a Puddin' in my Grind Hard video!
So glad TH-cam suggested your channel!!
Thats so sick, I want one!!!
💯
Those trees coming down was some ASMR😍
These video's are a real joy to watch. The content is amazing, the editing is perfect, the music is fitting, the video quality superb 👌 Props to the team! One of the better out there imo! ❤
That was way COOL 😎 thanks for letting me watch 👍.
That group you met would be one of the greatest collaborations of all time! Just saying. Puddins fab shop is an hour from where I live.
Love the before paintjob
That is amazing , I used to own the Firestone van gocart they used in the parades . got stolen from me years later .
Workin on karts with the boys using the parts you have laying around is a good time for sure
Awesome!!
Everything you guys touch turns into coooool 😊😊
Magic as usual👌🏼
That thing lolks sick!!🤘🏻🤘🏻
Wow that's awesome, Im definitely looking out for one
It's a good day when Grind Hard posts!
Every Friday!
Love it man!
DUDE! Puddin in da house, boiiii!!!
I love that Dodge Van body! So glad it’s restored properly
Wow it turned out just like the original! Perfection. Love this little build 👌
Aloha Ethan. This episode was a tad nostalgic for me when I heard "20 below zero". Wife and I are Hawaiians that as newlyweds wanted to try a change of scenery so of all places we chose McCall, Idaho which at the time (1981) was a sleepy little town of 2000. Our Hawaiian winters get down to a bone-chilling 60 degrees in January. I remember it getting down to 20 below zero in the dead of winter in McCall, but we were very well acclimated so evening walks in 20 below temps were enjoyable as long as we didn't breathe too hard, and freeze our throats. McCall I believe now has a population of 14,000, so not as sleepy or little as back then. Mahalo nui for a walk down memory lane. 😉🤙
Like how you got the hail melon move worked into that!
Way to end it too... just like the O'Reilly scream at the end of the commercial!!! Brilliant!! OOW!
Watching you guys is realy inspiring me to start work on my cbr900 swapped warrior I got it to a roller but stopped for add reasons lol
You are the best builders ever
That's awesome👍 but even though it wasn't original that purple with flames paint was beautiful!!😍💗 anyways great restoration guys👍
First!! Watching from Canada!🇨🇦 Love the videos!!
AHHHHH
I’m last and lastest here yay omg
As a Canadian from Ontario I'm jealous of the amount of snow you guys get!
Your content is amazingly fun to watch and me that's been to most of the states but never new idaho has a beautiful mountain view as well is a plus iv lived in maine and Oregon and realized I need to visit every state
The big hot rod slicks were cool , gotta put those back on !! Please 🙏🏻
Another premium project by premium geniuses!:-)
Another great job and video 🎉🎉🎉
Now I fully understand how much suprise videos are on all of your ssd's.
I saw the barbie camper not complete. Snow and no snow.
I love to see whats your next suprise vehicle video.
Thats awesome... 👊👊👊👊
Absolutely love Ethan's optimism.. ' The chain is gone!! '
" Well if it's gone that means its somewhere ! "
🤣😂😂 goodstuff
You guys do some really nice work
That headlamp Ethan has is ridiculous! I need one!
1:20 willie buddy, you need the last dodge demon to be made, the 170 factory drag slicks that are street leagel an come with a nhra rated parashute
I wish you warmer winter in your new shop.
😂😂Radiator hose in a blanket😂😂😂 love it😂😂
You guys REALLY need a heat reclaimer on your shop stove flue pipe.
We have multiple wood burning stoves in our home with Magic Heat, heat reclaimers. They help A TON
Lol Will doing the ad is pure gold
That was cool 😎 👌
I think a collaboration with Fred and Dave would actually make my life complete!
It's very nice how you build it all the way through tear it down and make it pretty then break it and build it better
Great episode. Would love to see you and the "former" dirt everyday guys get together. Seems like a great fit.
9:25 That’s dope you got the go kart in my town Lodi Ca
This is awesome. I would have been tempted to paint the van like the A-Team and add a spoiler. :)
Great job boys looks awesome
this is the most under rated build channle on youtube! love all the crazy suff yall come up with! cant wait to have my own shop to be able to build my ideas like yall do! thanks for the great content!
ABSOLUTELY----> AWESOME!!!!!!!!!!. 🙂
🔥 as always!!!! ☘️
Holy crap I love your content
Cool Van. I see Puddin's Fab Shop. Reminds me I need to hit up Orileys.
"Now we gotta chop it down a second time!" Probably one of the funniest "In the moment" things to say when a tree re-plants itself after you chopped it down.
I use a shop with wood heat, go to hobo freight or somewhere and get a decent size shop fan, play with the angle of the fan you'll notice a HUGE difference in how your shop is heated with a little circulation
20:10 never thought I’d see puddin in a grindhard vid…it’s just a pic but still pretty cool
What do you guys do about your heat and painting? I got some rims I wanted to paint but was worried about the heat and the fumes. Do you guys shut your heat down when you paint?
Sick vintage cart
I have a plan for easy snow removal. Put Tarps on your (dryish) shed roofs, When it snows, Tie the 6x6 to the tarps and drag them off the roofs.
This is the video I've been waiting for
You can buy a chimney heater above your stove in the workshop. Maybe add a litle fan to heat the entire workshop. Make it a project 🤪
That is awesome. 🔥🔥 🔥
My arms were itching watching y’all sand the fiberglass. Reminds me of crawling through insulated attics for work😂
great vid as always i loved it, one day you guys should get all your go karts running and race them
Throes were sold in the Hot Rod magazine to the 90's with all kinds to order and engine set up. I had a gocart company in town that sold cool one's in the 80's I had a Sprint car and my brother had a nascar gocart. With full fiberglass body with two stroke engines I think 125cc or 80cc or good old 6hp
Edwin needs to make a soundtrack with that flexing polycarbonate noise. Hit us with a slapper! 👏