I have two s16 digital snake for my wing. I used one 150ft ethernet cable to the first one then another 150ft cable from the first snake to the second one. That created a timing problem for my output speakers
My noble friend, I need help please, my wing's touch screen stopped working, I need to reset it, but I'm not sure if there is any way to reset it without the touch screen... If there is any way to restart it without the touch, I would really appreciate it if you could help me!
Thanks for great video, tell me please, with Behringer Wing can we have real time concert, mix it with wireless controll and real time do mixing and recording with Cubase?
Hey man. Thanks for your video. Is it possible to use the wing as an audio interface in ableton where i connect all my synths, drummachine and microphones and at the same time use the wing as a control surface for ableton ? That would be a dream setup for me.
Thanks for all this helpful content. I Subscribed to your channel some days ago since i bought my Behringer wing. I will be using it to mix from DAW .. I wish you can answer some questions for me. I am a Sick FL Studio User, sometimes I use Studio One but my main DAW is FL,.. My question is: It is possible to get a preset to control my DAW through my Behringer wing?
Hi Don👋 Form top of my head , I believe you can just set it up as 3 Mackie MCU. I’m no expert in DAW contrôle surface, I would do a quick google search on the subject, I can garantie you there’s a forum post about this. Good luck !
is there a way when usign logic that you can keep the far right section of 8 faders locked to bus mixes in Logic and use the left 12 fader for scrolling through the individual tracks then have the four far right faders be used to control different speaker A/B mixes? also is there a way to have the wing scrol through a session in banks of four channels or are you only able to navigate channel scroll in single channel movements?
Without switching the whole console to DAW Remote Control mode, is there a way I can trigger the transport controls in Ableton Live (i.e. play, stop, record)? I like to use Ableton to record rehearsals and Sunday services. Thanks!
@@GuillaumeLortie yes it can.. I figured it out.. I had to use the routing within reaper to send the sound channels back to the board 1 for 1 and i can do my virtual sound check that way.. but im stuck on the actual daw funtionality part..
@@ozzieo5899 Sound and DAW Interface is actually 2 different things. USB audio and Midi Interface may travel in the same cable but Reaper see it as 2 different things. have you set your midi in and outs in reaper and can you send or receive signal ?
Wich fader is default the master fader in daw mode? The next free fader or the most right one? Can i use the inbuild effects and compressor in daw mode? Thanks and greetings from Germany.
Hi form Canada 👋 Master Fader DAW : it depend on the setup and DAW The console will always pass signal in DAW mode but if you contrôle the software ( DAW ) you need to get out of that mode to get back to the console internal controls to manipulate them.
(Off topic of the video) Im about to buy a Astell&Kern A&Norma SR25 mp3 player I already own the shure s15 ear buds already do You think I should stick with those or upgrade to the shure se535
@@robertwheeler1308 I’m still on a iPhone 7, sorry I can’t help you with this one. also, I don’t understand the ‘’ audiophile ‘’ thing at all. the mix and speakers (or headphones) and room acoustics matter way more then the devices doing playback. if the weakest elements in your signal chain is your DA Converter, then consider an upgrade but be prepared to spend a lot and don’t forget the law of diminishing return apply here too. basically, it won’t matter much , if at all.
@@GuillaumeLortie another thing is I want to buy high end ear buds like the 846 but everywhere I see reviews people are constantly talking about how fragile it is and it breaking are there any other product you would recommend that competes with the 846 but with better durability?
@@robertwheeler1308 since i own a fair for over 5 years now and used them in every situation possible and replace them only once under warranty. they are my recommendation please take a look at my review
I have two s16 digital snake for my wing. I used one 150ft ethernet cable to the first one then another 150ft cable from the first snake to the second one. That created a timing problem for my output speakers
Why the hell is it nobody ever mentions Cakewalk? Is everyone somehow prejudiced against a DAW that';s free?
I honestly don’t know.
All my experience with (almost)free DAW was with Reaper and I stuck to it until I got Logic in 2020.
I did everything you did and my protools channels are not appearing on the wing but if I press play I can hear the sound out of daw control
Hi !
did you setup a MCU control surface in Protools?
My noble friend, I need help please, my wing's touch screen stopped working, I need to reset it, but I'm not sure if there is any way to reset it without the touch screen... If there is any way to restart it without the touch, I would really appreciate it if you could help me!
Hi 👋
You can connect a USB mouse and keyboard in the top left USB port.
Restart the console and you will have control and a cursor
Thanks for great video, tell me please, with Behringer Wing can we have real time concert, mix it with wireless controll and real time do mixing and recording with Cubase?
Hi 👋
You can use it to do a live show and DAW Record/Work at the same time.
@@GuillaumeLortie thank you very much
Hey man. Thanks for your video. Is it possible to use the wing as an audio interface in ableton where i connect all my synths, drummachine and microphones and at the same time use the wing as a control surface for ableton ? That would be a dream setup for me.
Hi 👋
Absolutely!
It has Both interference state and DAW controller. Just a push on a button away
@@GuillaumeLortie this is very good news. Any idea if abletons integration is good ?
Thanks for all this helpful content. I Subscribed to your channel some days ago since i bought my Behringer wing. I will be using it to mix from DAW .. I wish you can answer some questions for me. I am a Sick FL Studio User, sometimes I use Studio One but my main DAW is FL,.. My question is: It is possible to get a preset to control my DAW through my Behringer wing?
Hi Don👋
Form top of my head , I believe you can just set it up as 3 Mackie MCU.
I’m no expert in DAW contrôle surface, I would do a quick google search on the subject, I can garantie you there’s a forum post about this.
Good luck !
@@GuillaumeLortie thanks a lot. Today I was trying to get that done I'll still trying please let me know if you find something else. You're the best
Wow. Thank you so much 😊
Thanks
Straight to the point and very informative!
Thanks for watching
is there a way when usign logic that you can keep the far right section of 8 faders locked to bus mixes in Logic and use the left 12 fader for scrolling through the individual tracks then have the four far right faders be used to control different speaker A/B mixes? also is there a way to have the wing scrol through a session in banks of four channels or are you only able to navigate channel scroll in single channel movements?
Hi 👋
I’ve never done those before but if I had to guess, it will all happen on the Logic side and Remote surface options
Is it possible to flip the faders to sends?
Without switching the whole console to DAW Remote Control mode, is there a way I can trigger the transport controls in Ableton Live (i.e. play, stop, record)? I like to use Ableton to record rehearsals and Sunday services. Thanks!
You could use midi send into the User Custom Control to make the button’s
Thanks.. very interested in setting up with reaper... thanks for all your help..
in reaper, you need to add a midi controller in Parameter and you will be good to go!
@@GuillaumeLortie still having trouble..
can Reaper see it?
@@GuillaumeLortie yes it can.. I figured it out.. I had to use the routing within reaper to send the sound channels back to the board 1 for 1 and i can do my virtual sound check that way.. but im stuck on the actual daw funtionality part..
@@ozzieo5899 Sound and DAW Interface is actually 2 different things.
USB audio and Midi Interface may travel in the same cable but Reaper see it as 2 different things.
have you set your midi in and outs in reaper and can you send or receive signal ?
So my brother how I create a delay for the far away speakers, or do you require a different setup?
if you have multiple speakers that reproduce the same signal, they must time aligned , if both will be heard in a single space.
Thank you!!!
Wich fader is default the master fader in daw mode? The next free fader or the most right one? Can i use the inbuild effects and compressor in daw mode? Thanks and greetings from Germany.
Hi form Canada 👋
Master Fader DAW : it depend on the setup and DAW
The console will always pass signal in DAW mode but if you contrôle the software ( DAW ) you need to get out of that mode to get back to the console internal controls to manipulate them.
@@GuillaumeLortie thank. But i can use the internal effects on my daw tracks?
@@michaels81 absolutely!
Look for one of my video : User Signal is the secret you’re looking for
(Off topic of the video) Im about to buy a Astell&Kern A&Norma SR25 mp3 player I already own the shure s15 ear buds already do You think I should stick with those or upgrade to the shure se535
Hi Robert
if you want to upgrade form the 215’s wait and get the 846, i feel they are a better value over the 535.
@@GuillaumeLortie I have another question. Does the iphone 11 have good enough sound quality or should I get a MP3 player (Walkman a55)
@@robertwheeler1308
I’m still on a iPhone 7, sorry I can’t help you with this one.
also, I don’t understand the ‘’ audiophile ‘’ thing at all. the mix and speakers (or headphones) and room acoustics matter way more then the devices doing playback.
if the weakest elements in your signal chain is your DA Converter, then consider an upgrade but be prepared to spend a lot and don’t forget the law of diminishing return apply here too.
basically, it won’t matter much , if at all.
@@GuillaumeLortie another thing is I want to buy high end ear buds like the 846 but everywhere I see reviews people are constantly talking about how fragile it is and it breaking are there any other product you would recommend that competes with the 846 but with better durability?
@@robertwheeler1308 since i own a fair for over 5 years now and used them in every situation possible and replace them only once under warranty. they are my recommendation
please take a look at my review
Does it work with FL Studio?
anything that has Mackie MCU supoort will.
@@GuillaumeLortie Thanks