@@miauzkater6745 it’s not released here and I won’t be able to afford it anyhow , I’m hoping it will make the series one cheaper, because I only have the LS 400 but would very much like a WS400
Hi, WS-400 BASE (Blue cap) I predominantly designed for wet-on-wet basecoat applications. LS-400 BASE (Green Cap) is designed for both water-borne and solvent-based basecoat applications! We do have recommendation charts on our website to help you find the correct setups! Check here for more information: www.anest-iwata-coating.com/en/microsite/ Thanks!
What are the differences between the new series 2 LS400 and WS400 OBS for waterbourne basecoat. I felt like the old Ws400 series 1 OBS was less suited for the job compared too the ls400 for base , is this the same case for series 2?
Hi, so typically LS-400 and WS-400 BASE are used for very different paint technologies. Some systems prefer LS-400 and some prefer WS-400 BASE. So to answer your question neither is better or worse, it depends on the set up you need for the product you are working with. For more information on our recommendations check here: www.anest-iwata-coating.com/microsite/
@@AnestIwataRefinish which gun between the ws400 obs base or ls 400 would be better for octoral or debeer solvent basecoat? These paints aren't listed on your site
@@jeremyoetken2094 - For the basecoats, you've listed we would recommend LS-400. We would also suggest checking the TDS sheets and following the information provided. Thanks
I just bought an Anest Iwata Supernova LS 400 spray gun, can you tell me about the fan spreader rotation standards and also how many fluid rotations? for base coat and clear coat. Thankyou
I want to get the ls400 ws400 and the ws400 obs and hd. I also want to get different nozzle sizes needle sizes, switch bezels and colored knobs. Can you make a video explaining this? Whan fits, since no one can tell me about the series 2. And i hope the chrome on the digital Italian 2023 is better than the last edition.
Hi, thank you for commenting - Series 2 parts are interchangeable. Series 1 and Series 2 are not compatible. Series 2 all have tailored setups, we suggest looking at our recommendation charts to find the best match for the paint system you are using. (There shouldn't be a need to swap nozzles between spray guns) Thanks Anest Iwata Refinish
Nice workshop . Just would like to know the timings between base coats and clear coats !? Can I let dry the base coats completely or they need to be wet in order to apply the clear coats ? Thanks
Between Wet, Immediate, and Drop Coats there is a flash-off between 3-5 minutes! Before the clear coat stage, Allow for a minimum of 15 minutes of final flash-off time at 20°C before clearcoat application!
So depending on the material you are using - For most clearcoats/lacquer we are almost always going to recommend Series 2 WS-400 Clear! Depending on your budget there will be a gun that fits your needs, we recommend discussing this with your local sales branch. Thanks
Hi, we have recommendations for PPG products on our website, (Look for recommendation charts) this should give you the information you need: www.anest-iwata-coating.com/en/microsite/
Assuming the basecoat system is Permahyd, then you will be looking at a WS-400 BASE. For more information, you can check our website here, under the recommendation charts section: www.anest-iwata-coating.com/en/microsite/
Every time I hear 👂 SIKKENS automotive paint name .!! WELL OVER PRICE.!!! I can get better quality for less with SHERWIN WILLIAMS automotive paint..!!💯
I have both now. 2 WS & 2 LS - The series looks and feels smoother.... You can dial in your series 1 to nearly identical pattern - but then turn it out to a wider "I pattern" , when you want it to.... Series 2 definitely is more Comfortable
You keep telling everyone to look at their local branch. The gun is not available at all in the US it's all over in Australia for almost a year now but nothing for the US. That's the thanks we get for purchasing your guns for all these years. Real nice 👎
Anest Iwata the BEST OF THE BEST
Congratulations! I'm testing them these days both the LS400 2 and the WS400 2 are fantastic!
You made two magnificent guns!!!
That's great to hear - thanks for the support!
Any videos of you spraying it?
I have the series 1 LS400 and I love it , I can imagine how spectacular the new series 2 will be , yes I’m drooling
you must try the sr2, so much better than the first sr1
@@miauzkater6745 it’s not released here and I won’t be able to afford it anyhow , I’m hoping it will make the series one cheaper, because I only have the LS 400 but would very much like a WS400
this is "REALLY REALLY NICE"
excellent video
we have the ws400 and ls400 sr2, just perfect
That's great, glad to hear you're enjoying the series 2!
Minha pistola preferida! tenho 3 pistolas iwata e 2 aerografos que é dos melhores. (Brasil)
Great video. Thanks for all the details.
Thanks for the support - Glad you enjoyed the video!
Yes Tony 👍 whats the difference between the blue cap obs 1.3 and the green cap 1.3 ET
Hi, WS-400 BASE (Blue cap) I predominantly designed for wet-on-wet basecoat applications. LS-400 BASE (Green Cap) is designed for both water-borne and solvent-based basecoat applications!
We do have recommendation charts on our website to help you find the correct setups! Check here for more information: www.anest-iwata-coating.com/en/microsite/ Thanks!
What are the differences between the new series 2 LS400 and WS400 OBS for waterbourne basecoat. I felt like the old Ws400 series 1 OBS was less suited for the job compared too the ls400 for base , is this the same case for series 2?
Hi, so typically LS-400 and WS-400 BASE are used for very different paint technologies. Some systems prefer LS-400 and some prefer WS-400 BASE.
So to answer your question neither is better or worse, it depends on the set up you need for the product you are working with. For more information on our recommendations check here: www.anest-iwata-coating.com/microsite/
@@AnestIwataRefinish which gun between the ws400 obs base or ls 400 would be better for octoral or debeer solvent basecoat? These paints aren't listed on your site
@@jeremyoetken2094 - For the basecoats, you've listed we would recommend LS-400. We would also suggest checking the TDS sheets and following the information provided. Thanks
I just bought an Anest Iwata Supernova LS 400 spray gun, can you tell me about the fan spreader rotation standards and also how many fluid rotations? for base coat and clear coat. Thankyou
Donde puedo pedir el kit completo por favor
Awesome 💯
Thanks 🔥
I wish they would sell them in the us I can only find series 1
Been using the ls 400 just ordered the nova pro .
Just waiting for them both to become available in the U.S.
Of course they wouldn't reply as to when it would come available 🙄
Long wait
Donde puedo recibir una capacitacion
I want to get the ls400 ws400 and the ws400 obs and hd. I also want to get different nozzle sizes needle sizes, switch bezels and colored knobs. Can you make a video explaining this? Whan fits, since no one can tell me about the series 2.
And i hope the chrome on the digital Italian 2023 is better than the last edition.
Hi, thank you for commenting - Series 2 parts are interchangeable. Series 1 and Series 2 are not compatible.
Series 2 all have tailored setups, we suggest looking at our recommendation charts to find the best match for the paint system you are using. (There shouldn't be a need to swap nozzles between spray guns)
Thanks Anest Iwata Refinish
When are these guns available in the states?
Nice workshop . Just would like to know the timings between base coats and clear coats !? Can I let dry the base coats completely or they need to be wet in order to apply the clear coats ? Thanks
Between Wet, Immediate, and Drop Coats there is a flash-off between 3-5 minutes! Before the clear coat stage, Allow for a minimum of 15 minutes of final flash-off time at 20°C before clearcoat application!
Thanks
What if I use LS400 1.4 for clear?
Which one of this would be best for spraying lacquer on wood cabinets? And where can I buy it in the US?
So depending on the material you are using - For most clearcoats/lacquer we are almost always going to recommend Series 2 WS-400 Clear! Depending on your budget there will be a gun that fits your needs, we recommend discussing this with your local sales branch. Thanks
Waiting on them to come to the US. Sprays PPG Water at work, and PPG Solvet at Side work. Is 1.3 ET good for both?
Hi, we have recommendations for PPG products on our website, (Look for recommendation charts) this should give you the information you need: www.anest-iwata-coating.com/en/microsite/
Is it being considered for u.s.a sales or even in the process of being approved for compliance
It is!
TONY ROBINSON CLASS PAINTER THANKS TONY VERY WELL EXPLAINED THANKS FOR SHARING THAT INFORMATION 👍
So wich one would be best for a silver blend job for Spies Hecker water-based?
Assuming the basecoat system is Permahyd, then you will be looking at a WS-400 BASE. For more information, you can check our website here, under the recommendation charts section: www.anest-iwata-coating.com/en/microsite/
@Anest Iwata Refinish thank you for responding. Well all that's left is to wait for it to come out in the U.S.
How can I demo these in the US?
Sikkens gallon clear kit at $1k- that overspray is practically gold.
Tony You never painted when you came to lti😮
Exelent
How many pounds is 1.8 bar??
26.1 PSI, Thanks Anest Iwata Refinish
Even a child can do the lacquer with autowave 2.0 .It's will be useful if you demonstrate it with some hard to spray UHS lacquer. Thanks.
We used Autowave 2.0 because we filmed this at AkzoNobel. The Series 2 features multiple recommendations for multiple brands.
how can i get series 2
Depends on whereabouts you are based. Check with your local branch to find out more!
Que.mascara e essa top
Thanks for a excellent review and demonstration on the guns very well explained thanks buddy , ok you can send me my free gun now 😉 lol
Muito bom
Very interesting to me, because this gun my dream to work my garage, but no enouh money to buy this gun....😪. Help me😁😅
So,, Iwatas now spray more like an older Sata......
Every time I hear 👂 SIKKENS automotive paint name .!! WELL OVER PRICE.!!! I can get better quality for less with SHERWIN WILLIAMS automotive paint..!!💯
You mean overpriced?
Sorry but I see original LS 400 better than version 2….
oh no
@@miauzkater6745 original LS sucks. So it can't be any worse than that.
@@Juan25671 sr2 is perfect. sr1 is crap
I have both now. 2 WS & 2 LS - The series looks and feels smoother.... You can dial in your series 1 to nearly identical pattern - but then turn it out to a wider "I pattern" , when you want it to.... Series 2 definitely is more Comfortable
@@thistledewoutdoors3331 so it's really not that big of a difference? Like for real? Be honest bro lol
You keep telling everyone to look at their local branch. The gun is not available at all in the US it's all over in Australia for almost a year now but nothing for the US. That's the thanks we get for purchasing your guns for all these years. Real nice 👎
hey mate we missed out as well
@@camerongrady4644 where are you?
I have a feeling it's being held up by our environmental agency
What are you on about? Even to this day (MAY 2024) the series 2 is not yet sold in Australia. Get your facts right buddy.