Thanks Tony for taking your time and sharing that information with us is it a easy gun to use through for the first timer the clear gun people used to say it a hard gun to used mate and you have to get the fan spot on
Yes. The Series 2 is truly a straight out of the box experience. With the older version Series 1 (as stated in your reply and in the video) it had to be tweeked by the painter to try and acheive a sweet spot. The series 2 has been developed extensively to be set to full fan and full trigger. It is as simply as that. The spray gun will do the rest for you.
They reply to every comment except the ones asking when it will be released in the US. Real nice customer service IWATA were are all customers that have purchased your guns. The least you could do is acknowledge the question
Awesome Video. Do Love the Iwata Brand. I have several. Looking to get the WS400 Clear soon. My Question is. What is the proper way to clean right after spraying Clear? Do you have a video on it? Awesome product.
Great thanks for supporting the brand! We don't have a cleaning video (yet). We would recommend just doing your standard cleaning process. However, Pay close attention to the air cap, atomisation holes, split nozzle and the needle. Use small brushes to make sure there is no residue left in the small hard-to-reach areas. We have maintenance kits for this purpose with a mixture of different size brushes these are what we use! Thanks, Anest Iwata Refinish!
Seriously.. Just save some money and buy a gun with a thic round nozzle for the enhanced pre atomization and you're good to go. all the top tier guns has fat tips btw, you pay for the fan size. Still I must say Iwata WS-400 series appearance is amazing - maybe if you don't trust your skills, having a good looking (and pricy) gun on your hands will make you more confident and impact your end results? hahahaha 😄
1st time i used the series 1 gun it was a water hose runs every where. Did you reduce wth activator ? by how much. Also my settings were ,Bottom wide open/fan wide open and 3.5 out from closed fort he fluid.29 psi
What nozzle/needle size did you use? And what system? We mix everything by scales in our videos and follow the TDS of the system we are using. We always use both fluid and fan wide open and 2.0 Bar on clearcoats. Thanks, Anest Iwata Refinish.
@@AnestIwataRefinish TY for the reply. Using the LS and WS Supernova Original guns. with a 1.3 . Tamco Paint systems.1st time with these guns compared to my Sata 5000 this has sharp edges and cannot seem to stop running the clear on the corners of the panels. Shop temp at 70 degrees F. Temp of products in the 60`s i suppose in NY. Does the clear need to be heated to 100 f ? I did close up the fan a touch seemed to help but tough to build confidence in this yet. The LS i tried both Base and clear and worked fine just took a little longer for the clear but did not run 75% ovlerlap. TY for the help cheers.
I've heard it's already in the country but waiting for EPA approval and another thing is the digital versions are having issues with the chrome plating coming apart
The Series 2 WS-400 is available in two separate versions, one for base coat and one for clear coat. We would not recommend using one gun. Thanks - Anest Iwata Refinish.
So depending on the material you are using - For most clearcoats/lacquer we are almost always going to recommend Series 2 WS-400 Clear! Depending on your budget there will be a gun that fits your needs, we recommend discussing this with your local sales branch. Thanks
@stepanstepanovich5219 - the main differences will be the atomization characteristics and the size and shape of the fan patterns. WS-400 will break up the particles slightly more Due to having a Split nozzle with four slots. Ws-400 will also have a slightly more compact fan pattern. WBX is slightly different in you'll be getting atomization with three slots and the fan pattern is slightly larger. Obviously, material viscosity may change performance parameters!
On my original ws400, i dropped it and it fell on the tip 😞 it still sprays very well, but those 1:19 things are creased in a bit on one side. Should i replace the tip??
Without seeing how your WS-400 sprays, we can't answer that question. If there is a noticeable drop in performance then we would recommend replacing the nozzle.
Series 2 is not available in pressure-fed versions. However, we have a variety of pressure and gravity-fed spray guns so those may fit your needs. Check our website for more information: www.anest-iwata-coating.com/en/
ANEST IWATA It was, it is and will be THE BEST OF THE BEST
Estoy pensando agregar iwatas para mis pinturas 🤔 sobre todo esta serie 2👌
Thanks Tony for taking your time and sharing that information with us is it a easy gun to use through for the first timer the clear gun people used to say it a hard gun to used mate and you have to get the fan spot on
Yes. The Series 2 is truly a straight out of the box experience. With the older version Series 1 (as stated in your reply and in the video) it had to be tweeked by the painter to try and acheive a sweet spot. The series 2 has been developed extensively to be set to full fan and full trigger. It is as simply as that. The spray gun will do the rest for you.
@@gavsterr6164 thanks 😊 for getting back so whitch one do you buy i seen Tony using a 1.3 et and a w400 HD but whats Ob1 and that stuff
Hi Andrew, In this video, we talk about the out-of-the-box experience. In all of our videos we use the Series 2 fully open, No adjustment required.
These are the best guns I have ever used!
Thank you for the kind words. Glad you're enjoying the Series 2!
Tony I was think about the series 2 my friend said there developed a fault said the chrome on the gun peels off when you come to clean it
When will it be available in the USA. They say November but its already November and nothign
They reply to every comment except the ones asking when it will be released in the US. Real nice customer service IWATA were are all customers that have purchased your guns. The least you could do is acknowledge the question
Awesome Video. Do Love the Iwata Brand. I have several. Looking to get the WS400 Clear soon. My Question is. What is the proper way to clean right after spraying Clear? Do you have a video on it? Awesome product.
Great thanks for supporting the brand! We don't have a cleaning video (yet). We would recommend just doing your standard cleaning process.
However, Pay close attention to the air cap, atomisation holes, split nozzle and the needle. Use small brushes to make sure there is no residue left in the small hard-to-reach areas. We have maintenance kits for this purpose with a mixture of different size brushes these are what we use!
Thanks, Anest Iwata Refinish!
Seriously.. Just save some money and buy a gun with a thic round nozzle for the enhanced pre atomization and you're good to go. all the top tier guns has fat tips btw, you pay for the fan size.
Still I must say Iwata WS-400 series appearance is amazing - maybe if you don't trust your skills, having a good looking (and pricy) gun on your hands will make you more confident and impact your end results? hahahaha 😄
When they will arrive in Toronto Canada how much is the price
When are these available to buy in the U.S.?
Best gun in the world.
1,3 secondi
So when will it be available in the usa
1st time i used the series 1 gun it was a water hose runs every where. Did you reduce wth activator ? by how much. Also my settings were ,Bottom wide open/fan wide open and 3.5 out from closed fort he fluid.29 psi
What nozzle/needle size did you use? And what system? We mix everything by scales in our videos and follow the TDS of the system we are using. We always use both fluid and fan wide open and 2.0 Bar on clearcoats. Thanks, Anest Iwata Refinish.
@@AnestIwataRefinish TY for the reply. Using the LS and WS Supernova Original guns. with a 1.3 . Tamco Paint systems.1st time with these guns compared to my Sata 5000 this has sharp edges and cannot seem to stop running the clear on the corners of the panels. Shop temp at 70 degrees F. Temp of products in the 60`s i suppose in NY. Does the clear need to be heated to 100 f ? I did close up the fan a touch seemed to help but tough to build confidence in this yet. The LS i tried both Base and clear and worked fine just took a little longer for the clear but did not run 75% ovlerlap. TY for the help cheers.
which spray gun would be better for single stage urethane or old fashion acrylic enamel
Your safe bet would be the WS-400, but you'll also be fine with one of our W-400 models. Just find what works for you!
Good things from Romania !
When will they be available to the US market? Seems like I’ve been waiting forever
I've heard it's already in the country but waiting for EPA approval and another thing is the digital versions are having issues with the chrome plating coming apart
Could ask what year was the production of the competitor gun? Is it their latest model available.
Thanks
Hi Paul, all the guns used in this video are the latest editions available.
Thanks
what the CFM if it has 1.3mm tip
Классный ролик,пистолет оболденый👍
Здравствуйте скажите пожалуйста россия когда появляется серия 2 AHEST IVATA вс 400 серия 2
Can the WS 400 series 2 be used for base and clear?
The Series 2 WS-400 is available in two separate versions, one for base coat and one for clear coat.
We would not recommend using one gun.
Thanks - Anest Iwata Refinish.
Which one of this would be best for spraying lacquer on wood cabinets? And where can I buy it in the US?
So depending on the material you are using - For most clearcoats/lacquer we are almost always going to recommend Series 2 WS-400 Clear! Depending on your budget there will be a gun that fits your needs, we recommend discussing this with your local sales branch. Thanks
@Anest Iwata Refinish thank you, I'm in Los Angeles and where or how do I find a local brunch? I been looking but can't find it.
Brilliant 💯
you said everything except the ratios of basecoat and clear coat you have mixed paint is clear was 2:1 with hardener and 10% thinner?
All materials are mixed by scales.
When will they become available in the U.S.?
Last I was told is in November
@@g_lara85 thanks!!!
Funny they replied to every question except the US release question. Devillbiss has more customer appreciation obviously
@@Juliopaints yeah no kidding
👍👍👍👍👍👍👍👍
What is the difference between the iwata ws 400 SR2 clear and w400 wbx spray gun if you apply varnish? Thank you.
@stepanstepanovich5219 - the main differences will be the atomization characteristics and the size and shape of the fan patterns.
WS-400 will break up the particles slightly more Due to having a Split nozzle with four slots. Ws-400 will also have a slightly more compact fan pattern.
WBX is slightly different in you'll be getting atomization with three slots and the fan pattern is slightly larger. Obviously, material viscosity may change performance parameters!
Здравствуйте, такой краскопульт уже есть в продаже и какая цена?
Есть такие пистолеты,цена 33-35 тысяч рублей
On my original ws400, i dropped it and it fell on the tip 😞 it still sprays very well, but those 1:19 things are creased in a bit on one side.
Should i replace the tip??
Without seeing how your WS-400 sprays, we can't answer that question. If there is a noticeable drop in performance then we would recommend replacing the nozzle.
Good thanks bosku 👍
Thanks for stopping by! 👍
Where can I buy this gun????
Talk to one of your local distributors they will be able to help!
Has anyone compared this with the entech?
By entech do you mean LS-400? Thanks
Do you have pressure feed type or Not?
Series 2 is not available in pressure-fed versions. However, we have a variety of pressure and gravity-fed spray guns so those may fit your needs. Check our website for more information: www.anest-iwata-coating.com/en/
Thank you for your information
What battery does the digital guage use
Hi Jeremy, the DPG-1 uses a CR1632-type battery! These will be supplied by your local sales branch and distributors!
Anybody ever sprayed glasurit with one of these?
You can spray Glasurit with Series 2 - you can check our recommendation charts here: www.anest-iwata-coating.com/en/microsite/
I want one please 😄👍
😍😍😍😍😍
Where can I buy this gun??