It was a fun making these videos..Hitting the 👍 button is an easy and free way to support the channel. Thanks 🙂 Watch the entire TinyHawk III Series Here: TinyHawk III RTF Impressions: th-cam.com/video/11QptBbtbG0/w-d-xo.html TinyHawk III RTF Full Specs: th-cam.com/video/Nztj8JM_U0M/w-d-xo.html TinyHawk III First Flight: th-cam.com/video/RCYcmegSjRI/w-d-xo.html TinyHawk III 5 Things I Like and Dislike: th-cam.com/video/IpkwOW8O_Rc/w-d-xo.html SUBSCRIBE to see upcoming TinyHawk videos. Buy The TinyHawk III RTF Here: bit.ly/3x977ex Buy The TinyHawk III(Drone Only): bit.ly/3DE28Fp Buy The BabyHawk II Here: bit.ly/3czOpDI
i took my tinyhawk 3 around 100 feet above the oak trees in my neighborhood and it lost connection too the controls but not my video feed and it kept flying up, i lost connection. so I drove around in my car hoping too get the video too connect and it finally did, it was around 100 yards away from where i took off in a front yard thankfully.
Lmao that was me today!! Only had it for 20 mins, 1st battery in and I also had to jump in the car and go drive around until I got video feed to know it was near. Found it in the golf course down the road! Literally the moment I found it and got back in the car……. It started pouring rain!! You bet I went home and set up FS in beta flight lol almost lost it before I even had it lol
They said it could run on 2S, but they highly discouraged it. Maybe more susceptibility to ESC failure? Either way, the included connector is a PH2.0 for only a 1S battery.
You may be right, Someone can correct me if im wrong but the charger @6:15 seems to have 2 charging ports for 2S batteries. Why put those in if 2S's weren't intended to be used on the drone?
I have not flown the Cetus pro, so I can't compare. I think either would make a fine beginner drone. If I remember correctly, the Cetus did have optical flow sensors to help with hovering. The goggles and drone with the TinyHawk3 RTF is not bad though.
trying to figure out if I should get the Tinyhawk 3 or the Easy Pilot Pro for my first FPV drone. I believe the Tinyhawk 3 is smaller and I would be flying it indoors 70% of the time. and it seems to me that small would fly better indoors. but as I understand it, the easy Pilot Pro has a better setting for beginners. so which one? LOL.
The TinyHawk3 is the more mature/sophisticated/capable drone. Either one flies well. If you are buying it as an RTF, I think the Easy Pilot goggles does NOT come with a DVR(won’t be able to record your flights). I personally would choose the TinyHawk3 out of the two.
One of my gripes with this kit is the charger! Only uses 1S batteries but the charger only has 2 1S bays and takes up space with the other 2 - 2S bays! I would’ve rather had a charger that has 4 to 6 1S charger bays and be able to charge more than 2 batteries at a time. The Batteries take longer than I would’ve thought to charge. Thanks for sharing your videos on the TH3. It’s a decent little kit for the price.
Yes, that does indeed suck. I don't think I even used that included charger(my other RTF has one with 4 ports). You might want to look into a new charge to save your batteries and more importantly your time. I'm sure you've seen this new 1s charger online. I Highly recommend you get one. You can charge 6 batteries simultaneously and increase your charger's current output as well. I'll leave my review on it linked below. th-cam.com/video/4hBmitnXz_Y/w-d-xo.html
Once again thank you brilliant review I am a newbie in the FPV world I have 2 Emax drones just recently purchased the tinyhawk 2 and the tinyhawk freestyle 2 kit. Could I ask what’s the best compatible RC to use with the 2 drones I’ve have mentioned any help would be appreciated
Great reviews man👍when I got into fpv last year there weren't any good rtf kits if any at all and now there are so many it's hard to decide lol I'm still trying to decide on a good whoop that can freestyle....this was on the list but now idk🤔✌
@@OneManUnmanned thanks I have been looking at that quad and out of all the whoops it definitely has the best acro ability and weight to fly outside 👍 I also was looking at the mobula 6 and moblite 7 but they might not perform that well on a windy day and with me being from Chicago that's all the time lol✌
man i hate this thing lol. Such a headache. My camera no longer connects to the screen and idk why? Trying to get it to turn on is a problem also. I think i change the controls somehow because everything went out of wack when i touch the trim buttons. Idk what to do anymore. I'm about to use it as a good campfire
Is your goggles on the correct VTX channel? I'm not a big supporter of auto-scan, but if you don't know the channel of your VTX, you might want to try the auto scan feature of your goggles to retain an image(considering you might on another channel) .
I have not tried the CetusPro, but it is similar in the sense that everything is provided. The only thing that stands out, is the goggles does not have a DVR and therefore can't record your flight footage. The drone and radio seems ok.
It really depends on what your interest are. Are you a freestyle kind of person, or maybe a cinematic, or long range person? Do you like loud and fast, or like to stay under the radar? Coming from a tinywhoop, I would recommend a drone that performs like a 5inch drone, but smaller and quieter. A 3.5 inch drone like the BabyHawkII would be a good option. If you like cinematics, the GEPRC CineLog 25, 30, or 35 is a great choice. If you like long range, the Crocodile Baby LR is nice. If you like 5inch drones, the Nazgul5 V2 or Nazgul Evoke are good choices. I don’t think you can go wrong with the EMAX BabyHawkII. Just remember when you choose your drone, It has to have an Frsky receiver(D8,D16,XM+) to work with your E8 radio.
I have not done it yet, but have the parts and intend to do it within the week. I'll document the process. As I've said, I have not done it yet, so I don't know what snags or problem I may encounter. My plans was to use a free UART on the FC and connect an ELRS receiver. I'll let you know when it's done.
The TinyhawkIII is designed and advertised as a 1S drone.. Even the manuals for the RTF and TH3 BNF indicate 1S. Having said that, the FC/ESC in the TinyHawk is rated for 2S power just like the one in the TinyHawkII. The TinyHawkII however had a Battery connector to accommodate a 1S and 2S power source. EMAX did indicate that the majority of pilots flew the TH2 on 1S power rather than 2S. There are also indications from pilots that reliability decreased on 2S power. Are these the reasons why the TH3 came with a 1S PH2.0 connector? No one knows.
Ok so I have a dji and those drones are so easy to fly> I am having a hard time with taking off I can't seem to have it hover, my last flight was better but a bit of a learning curve
I think you nailed it. It does take some time to learn. FPV is nothing like a DJI drone, and everything is manual. Spending some time in the simulator helps.
It is designed to fly 1s. I think the FC could handle it, but you would have to modify the battery leads and probably change some settings in BetaFlight.
I understand your frustration, but what does GetFPV have to do with this video or the drone? If you bought a totally different brand/drone/product from GetFPV, it is possible to get the same service or outcome, right?
I have been in contact with nine different people at Emax 7 in california 2 in china 3 phone calls 2 california 1 china. I assure you no online seller warrantees Emax products you are email referred/swept to>>EMAX who is the contact at emax that you don't have that you can't ask to find out i'm 💯
It was a fun making these videos..Hitting the 👍 button is an easy and free way to support the channel. Thanks 🙂
Watch the entire TinyHawk III Series Here:
TinyHawk III RTF Impressions: th-cam.com/video/11QptBbtbG0/w-d-xo.html
TinyHawk III RTF Full Specs: th-cam.com/video/Nztj8JM_U0M/w-d-xo.html
TinyHawk III First Flight: th-cam.com/video/RCYcmegSjRI/w-d-xo.html
TinyHawk III 5 Things I Like and Dislike: th-cam.com/video/IpkwOW8O_Rc/w-d-xo.html
SUBSCRIBE to see upcoming TinyHawk videos.
Buy The TinyHawk III RTF Here: bit.ly/3x977ex
Buy The TinyHawk III(Drone Only): bit.ly/3DE28Fp
Buy The BabyHawk II Here: bit.ly/3czOpDI
Watched several videos on this drone, and you were the first to mention that they dropped the 2s option. Thanks for being thorough!
Thanks, I appreciate that. I try to be as thorough as possible, although it may be less entertaining. Thanks for your support.
Just ordered my first fpv quad and went with this one! Thank you for the videos and reviews on it!
Congrats.. You're going to love it. Welcome to FPV!
They are labeled now 1:00. 2:45 - They can be powered by a 2S battery. S1 is good for battery and S2 is good for outside.
Thanks for the update..Appreciate that.
Can't get mine to fly reliably. It takes several attempts be for it flies. Spins in circles before shutting off.
That sucks..I recommend contacting EMAX or the distributor
@@OneManUnmanned Things have gotten better. I think I damaged some of my batteries. Thanks for answering.
i took my tinyhawk 3 around 100 feet above the oak trees in my neighborhood and it lost connection too the controls but not my video feed and it kept flying up, i lost connection. so I drove around in my car hoping too get the video too connect and it finally did, it was around 100 yards away from where i took off in a front yard thankfully.
I'm glad you found it.. that's pretty far though for a tiny whoop.
Go into Betaflight dude and on the failsafe tab put it to drop otherwise it’s going to happen again brother 👍🤜🏻🤛🏻
Lmao that was me today!! Only had it for 20 mins, 1st battery in and I also had to jump in the car and go drive around until I got video feed to know it was near. Found it in the golf course down the road! Literally the moment I found it and got back in the car……. It started pouring rain!! You bet I went home and set up FS in beta flight lol almost lost it before I even had it lol
I believe emax did say that it will run on 2s. If that’s the case it sucks they didn’t include a 2s in the kit
They said it could run on 2S, but they highly discouraged it. Maybe more susceptibility to ESC failure? Either way, the included connector is a PH2.0 for only a 1S battery.
You may be right, Someone can correct me if im wrong but the charger @6:15 seems to have 2 charging ports for 2S batteries. Why put those in if 2S's weren't intended to be used on the drone?
Good question..I wondered the same thing.
Do you prefer tinyhawk or cetus pro .thanks
I have not flown the Cetus pro, so I can't compare. I think either would make a fine beginner drone. If I remember correctly, the Cetus did have optical flow sensors to help with hovering. The goggles and drone with the TinyHawk3 RTF is not bad though.
@@OneManUnmanned thanks for anser
trying to figure out if I should get the Tinyhawk 3 or the Easy Pilot Pro for my first FPV drone. I believe the Tinyhawk 3 is smaller and I would be flying it indoors 70% of the time. and it seems to me that small would fly better indoors. but as I understand it, the easy Pilot Pro has a better setting for beginners. so which one? LOL.
The TinyHawk3 is the more mature/sophisticated/capable drone. Either one flies well. If you are buying it as an RTF, I think the Easy Pilot goggles does NOT come with a DVR(won’t be able to record your flights). I personally would choose the TinyHawk3 out of the two.
@@OneManUnmanned thank you..
One of my gripes with this kit is the charger! Only uses 1S batteries but the charger only has 2 1S bays and takes up space with the other 2 - 2S bays! I would’ve rather had a charger that has 4 to 6 1S charger bays and be able to charge more than 2 batteries at a time. The Batteries take longer than I would’ve thought to charge. Thanks for sharing your videos on the TH3. It’s a decent little kit for the price.
Yes, that does indeed suck. I don't think I even used that included charger(my other RTF has one with 4 ports). You might want to look into a new charge to save your batteries and more importantly your time. I'm sure you've seen this new 1s charger online. I Highly recommend you get one. You can charge 6 batteries simultaneously and increase your charger's current output as well. I'll leave my review on it linked below.
th-cam.com/video/4hBmitnXz_Y/w-d-xo.html
@@OneManUnmanned yep, I literally ordered that earlier this morning!! It’ll definitely make life easier!!
Once again thank you brilliant review I am a newbie in the FPV world I have 2 Emax drones just recently purchased the tinyhawk 2 and the tinyhawk freestyle 2 kit. Could I ask what’s the best compatible RC to use with the 2 drones I’ve have mentioned any help would be appreciated
The Radio Master Zorro is one of the best controllers in the hobby. The CC2500 and 4-in One module should work with your drones.
I have a queton so if you buy the radio and the goggels from the tinyhawk3 can you fly the tinyhawk 2 with that?
You should be able to as long as the Tinyhawk2 has a D8 receiver.
Im going to buy a fpv drone for my first time and I don’t know if i should get cetus or tinyhawk which would you recommend?
Can the goggles and radio on this be used on the Babyhawk 2?
Yes it can..I think they all use the D8 protocol.
@@OneManUnmanned thanks! You're freaking great!
I'm not great, but I appreciate that. Thanks
@@OneManUnmanned you ARE bro 👍🤜🏻🤛🏻
Thanks 😊
Great reviews man👍when I got into fpv last year there weren't any good rtf kits if any at all and now there are so many it's hard to decide lol I'm still trying to decide on a good whoop that can freestyle....this was on the list but now idk🤔✌
Thanks man... These kits have come a long way. The CineLog 35 is said to have decent Acro abilities.
@@OneManUnmanned thanks I have been looking at that quad and out of all the whoops it definitely has the best acro ability and weight to fly outside 👍 I also was looking at the mobula 6 and moblite 7 but they might not perform that well on a windy day and with me being from Chicago that's all the time lol✌
What googles would you suggest for a upgrade that works with the tiny hawk? Something that binds with it without doing anything else?
man i hate this thing lol. Such a headache. My camera no longer connects to the screen and idk why? Trying to get it to turn on is a problem also. I think i change the controls somehow because everything went out of wack when i touch the trim buttons. Idk what to do anymore. I'm about to use it as a good campfire
Is your goggles on the correct VTX channel? I'm not a big supporter of auto-scan, but if you don't know the channel of your VTX, you might want to try the auto scan feature of your goggles to retain an image(considering you might on another channel) .
Have u tried cetus pro ? Ur thoughts on it ?
I have not tried the CetusPro, but it is similar in the sense that everything is provided. The only thing that stands out, is the goggles does not have a DVR and therefore can't record your flight footage. The drone and radio seems ok.
What fpv drone would you recommend after mastering the tinyhawk 3, that will bind to th tinyhawk 3 receiver?
It really depends on what your interest are. Are you a freestyle kind of person, or maybe a cinematic, or long range person? Do you like loud and fast, or like to stay under the radar? Coming from a tinywhoop, I would recommend a drone that performs like a 5inch drone, but smaller and quieter. A 3.5 inch drone like the BabyHawkII would be a good option. If you like cinematics, the GEPRC CineLog 25, 30, or 35 is a great choice. If you like long range, the Crocodile Baby LR is nice. If you like 5inch drones, the Nazgul5 V2 or Nazgul Evoke are good choices. I don’t think you can go wrong with the EMAX BabyHawkII.
Just remember when you choose your drone, It has to have an Frsky receiver(D8,D16,XM+) to work with your E8 radio.
@@OneManUnmanned long range for sure.
@@OneManUnmanned btw, I’m new to this
@@keyeblackmon hey bud The babyhawk 2 is a great quad 👍👍👍
Any tips on how to switch receiver and controller on the tinygo I know it's not related to the video but u did help me in choosing the tinygo
I have not done it yet, but have the parts and intend to do it within the week. I'll document the process. As I've said, I have not done it yet, so I don't know what snags or problem I may encounter. My plans was to use a free UART on the FC and connect an ELRS receiver. I'll let you know when it's done.
@@OneManUnmanned thanks for ur time an reply I'm looking forward to it ur videos r very helpful I'm new to fpv so thanks
The EMAX website states that the drone supports a 1-2S input, but you said that it only supports 1S. Are you sure?
The TinyhawkIII is designed and advertised as a 1S drone.. Even the manuals for the RTF and TH3 BNF indicate 1S. Having said that, the FC/ESC in the TinyHawk is rated for 2S power just like the one in the TinyHawkII. The TinyHawkII however had a Battery connector to accommodate a 1S and 2S power source. EMAX did indicate that the majority of pilots flew the TH2 on 1S power rather than 2S. There are also indications from pilots that reliability decreased on 2S power. Are these the reasons why the TH3 came with a 1S PH2.0 connector? No one knows.
@@OneManUnmanned thanks for the reply. Good to know.
Iam from india how can I buy this
There are links in the description on how to buy.
Ok so I have a dji and those drones are so easy to fly> I am having a hard time with taking off I can't seem to have it hover, my last flight was better but a bit of a learning curve
I think you nailed it. It does take some time to learn. FPV is nothing like a DJI drone, and everything is manual. Spending some time in the simulator helps.
Hi nice review
Can you change vtx to 200 via the goggles ?
Thanks
Yes, you can change the VTX power using the goggles and radio via Smart Audio. Works well. Thanks for your support.
@@OneManUnmanned thank you
Not a prob.
Great video, Thomas.
Thanks, I appreciate it.
You can fly 2s with these
It is designed to fly 1s. I think the FC could handle it, but you would have to modify the battery leads and probably change some settings in BetaFlight.
Great video!
Thank you Julian!
This drone falls out the sky for me it flies fine for a few seconds then the motors stop
Sounds like a “failsafe”.
@@OneManUnmanned you’re right I didn’t have one set up
I entirely dislike the Googles… made for very very small faces
It is kinda small
don't buy this kit getfpv sold me a bad kit and won't warranty it
I understand your frustration, but what does GetFPV have to do with this video or the drone? If you bought a totally different brand/drone/product from GetFPV, it is possible to get the same service or outcome, right?
getfpv doesn't do anything but hand you to emax who does even less
except get money and not fix bad sales
I have been in contact with nine different people at Emax 7 in california 2 in china 3 phone calls 2 california 1 china. I assure you no online seller warrantees Emax products you are email referred/swept to>>EMAX
who is the contact at emax that you don't have that you can't ask to find out i'm 💯
Any tips on how to switch receiver and controller on the tinygo I know it's not related to the video but u did help me in choosing the tinygo
coming soon📹