วีดีโอ

can I use this 3.5mm jack for analog system?

like the 4 door 33 :-)

Tired of “reviews” like this. I can read their website just fine thanks. Would be a better review of using it in something.

Do i habe to Bridge the 9v Pad on the bec to use it with 6s and o3 Air Unit?

i have a question.. I order the RP3 and I see it have two antennas ports could i just use one?

So you have to do it manually?

layers on layers ect. ect. etc. 🤓🤓🤓

Hey One Man, could you make a video of the Hawkeye thumb 4k? It weighs 15 grams, but u can fpv from it and record in 4k, so you do not need a separate fpv camera, that should save some weight.

I subbed so fast my thumb hurts 😂 👍

Is this better than Cetus x

How to get this receiver into wifi mode please

Can i have the stl file?

You should use AIO to make it lighter

the old day i think frsky do almost same system that can combine 2 reciever... yeah 2 reciever, you could give more extra sbus receiver input to the main receiver... so extra sbus can use 2.4 and main receiver use 900mhz... not as versatile and robust as ELRS, use combine of frsky taranis internal 2.4 TX and r9m backpack TX so it make dualband TX and RX.... but its only for make failsafe system if other band get interfered... maybe not for speed of data rate and failsafe as elrs system provide...

Well done video. Are you still flying with the Gemini? How many drones have you installed this in? I am thinkging of moving all of my DJI03 and Vista drones to ELRS and using one radio for all my drones. Have you done that or do you fly DJO with DJI controllers?

Same frequency as meshtastic 915mhz in the usa

the image in the goggles seems much cleaner than fatsharks, is that so?

The bolts do not really back out. Real problem is, BetaFPV in their infinite wisdom chose to use nylon M2 nuts on these bolts that hold together the frame, the prop guard, and the AIO board sandwiched in between. So what happens in a crash, the prop guard pushes on these bolts, and nylon nuts basically skip their threads, compress the rubber FC mounts, and then get stuck in that new position. Now the bolts are not fastened to the frame, there is a gap, and the frame wiggles around relative to the AIO and the prop guard. Re-tightening these nuts is not a solution as they are now weaker and will strip even easier next time you crash. Replacing those with steel M2 nuts is the first thing anyone should do to their new Pavo20 Pro or the original Pavo20 which has the same exact problem. You're welcome :)

you have massively influenced my choice to switch from Frsky to ELRS in the near future. thanks for the video xoxoxox

What is the WTF page? did I hear right?

can we put avatar moonlight kit inside ? im curious

Nice! I’m glad this one is a top mounted pack unlike the Pavo20. For my next daily driver it’s the Pavo25 v2 vs the Speedy Bee Bee25

I entirely dislike the Googles… made for very very small faces

dont do it. get a radiomaster pocket. all of this and way way more

What controller and goggles did you use

it does do "storage charge" just plug in your battery, set min voltage per cell to 3.8 and plug your phone or something else to the usb-c to discharge the lipo while charging your device! win win

Is it possible to mount Walksnail Moonlight instead?

Mine Shipped on launch day (10/15/24) and is still listed as a "per-order". Looking forward to the 3.5" Tanq-S build.

I got an awesome deal on a used one that was flown once, I haven't flown it yet.

Can I use this only with two cables fixed at the battery? So I could use this in a Rc Airplane without FC...

Hello. Could you help me figure out what is causing the vibration of the tinyGO 4k drone? I have the second version of the drone, it writes gyro data to a file on a flash drive. But gyroflow does not save from shaking and vibration, which creates a blurry picture. And I also encountered the fact that the 5D button does not open the camera settings. How else can I enter the camera menu to change the settings? I would be very grateful for your help.

@OneManUnmanned hi. I have the same drone, only the second modification. It writes gyro data directly to a file on a flash drive. But I have a problem: it vibrates very strongly during flight and the videos are blurry. I can't stabilize this high-frequency shaking. Please help, what should I do?

Hi. How to reduce camera vibration? My camera vibrates even when it's just hanging. And it vibrates so much that the picture becomes blurry.

Hi, did you apply some presets ?

That's one of the hardest UFL connectors ever to put on. You do not want to be taking off your antenna and putting it back on.

Is there a lot of loss of performance with using a 6S? The 9 to 6v happen through a loss of batt charge to heat?

A little late, but I just got mine! Or Maybe I'm right on time considering they just released the AG01 nano gimbals 🤗🤗

Your videos are getting better and better. Keep it up. Excellent explination too

The speedybee mini stack weighs 5g more. I'd prefer this aio to be lighter without the cnc or else get the mini stack. Stack is always better if you have the space

looks very interesting, great video as always :)

i just bought this FPV drone and watched your other videos on it, which where really good. I still am not sure when I should be using 24mw or 300 mw. Does one setting work better for indoors and one for outdoors. This is my first FPV drone. I have been flying the DJI mini 2 se which is totally different. Thanks.

with the Aquila 16 I was disappointed with the camera. I was wondering if the camera could be switched out for a better/different one? one that didn't have such high contrast.

hey, anybody, was just trying to get wtfos osd to attach osd to video, but the app looks a bit different now, i can choose video file and srt file and sd osd and hd osd windows, but the ssecond window which just says osd won't load. weird because if i click it and choose a downloaded osd it goes automatically to either sd or hd window. i aalready have osd on v2 goggles and the srt files are showing up, not sure if i have to add osd again on sd card?.... sidenote.. on pc the v2's dont delete the srt files? need to remind myself to format it in pc maybe.

How i can get the dual antenna holder

You and your family ok after Milton?

Im late but what goggles did you use with this?

Another drone for O3. If there was not a ton already... Where is the Avatar Moonlight mount! ?!?

My only problem with this fc is I can't put 20awg wire for power lead because the gyro is near the battery pad and it make noises if you use 20awg wire I try a lot I increase filtering change the tune and ut affect how it fly and still noisy for me with 20awg wire

Should I build 3.5inch or 5inch fpv drone as a first fpv drone

It's a pity that it is not compatible with the moonlight. I don't understand the target audience for this drone. If you already have to buy the dji gogoles to fly this, why wouldn't you just get an avata, especially if you don't want to freestyle, but just fly cinematic.