Easily one of the best RTF starter kits you've reviewed on this channel. I'm impressed that the goggles still have some utility even if you want to purchase a more advanced set to replace them. Only other goggles I know that can do that would be Eachine's EV800D and the FXT Viper. Still not quite as impressive as the Novice IV kit, but this is roughly half the price so that's something to consider. Thanks for the great review as always!
Finally, Emax's tinyhawk III! Its superb that they made the new version in a short period of time! As Tinyhawk II is not that old. Their RTF kits are amazing and the tinyhawks' mass is same as always... Negligible like one is holding a paper! Controller is really beautiful... And the goggles are also mind blowing!!! Never knew that it was that good. Looks really stable indoors... I like these types of drones which are really small amazing cinewhoops, which are durable, that can do impressive and astonishing cool things and also costs not much!
I just ordered one of these, an upgrade from my Makerfire Micro FPV Shark drone. Love that little blue bugger but I think this'll be a great upgrade. Thanks for the review!
I just ordered mine. I had a wonderful time with my Hubsan Zino GPS drone but now it's time to start doing stunt FPV. I could have the drone tomorrow in another store if I want, however one store is closed for 2 weeks and they give 15% discount on all orders while closed. I'm a patient man.
@L0wSkiller It's really really hard. So hard that I've sold it and bought the (more expensive) DJF FPV. Because that one has a GPS hover mode. It's possible but very hard with the tiny hawk.
Love my tinyhawk II.. this seems to have a lil better camera and less kV motors less power & longer flight time.. outside seems the same. Looks tiny bit different. I use my old tinyhawk ii rtf case for x9 lite transmitter and 03o goggles
Love my TH3. The dogs snatched it out of the air a few too many times and the frame is cracked in several places. I like to fly it outdoors in a stiff gusty breeze. It shimmies when the wind kicks up because of the broken frame, but it still flies great. Reminds me of the movie "Batteries Not Included" where the heroic little injured drone was trying to fly. Probably will get another frame for it, but have been looking for something similar in an ARF. I've been watching your beginner videos but you are so enthusiastic, it is hard to make a decision based on your glowing reviews.
Best review I've seen so far for a fpv beginner. If I order it now from banggood. I might get it by spring here in the US. I wish Amazon would have these. Thanks Cap't!!
i think this is the best beginner kit shown to date, especially because there is a screen and no need to have a cell phone, just because of that i'd consider it even not being a beginner
Am I understanding correctly that the only video you can record with this one over say a GEPRC TinyGO 4K, is the analog video that the goggles see? I feel like thats a huge difference between the two if so. Im struggling between them both right now and cannot make up my mind!
I was looking at the BETAFPV Cetus Lite FPV Drone after your review, but now I'm looking at this Tiny Hawk 3.... I love your enthusiasm. I'm just looking for a drone to mess around with inside my house. not sure I won't have motion sickness with FPV. I get a little VR sickness with my VR headset when doing Flight sims or Roller Coasters sims. but only when not looking straight ahead when doing those sims (ie. if I turn my head while flying a plane to watch an enemy plane go down or look to the side when on a Roller Coaster to watch scenery go by). if I look straight ahead my stomach is fine.
I bought the Betafpv Cetus lite. came today. "OMG that thing is tiny!" (first thoughts upon opening the box). I charged everything. was so happy the batteries only take 20 minutes to charge. never having flown anything RC before I was very careful with my first take off from my coffee table. not sure why but the thing tends to "jump" into the air. after hours of practice, it still jumps into the air. by jump I mean about 6" from resting to airborne. I thought I saw you do a smooth take off. anyway, the "jump" doesn't bother me that much. flying around the house minus the goggles was fun! after I was able to complete a circuit of my living room and kitchen several times without getting confused as to what joystick does what I decided to try the Goggles. I wear glasses but I have a pair of Arm less reading glasses ($9.99 Amazon) that clip onto my nose. they worked great! fit right into the headset. I was able to fly around the same living room and kitchen. it was a blast of a day! get the oval arm less reading glasses not the rectangle ones. THANKS for your review. I think I'm on my way to a new hobby.
its the next day, I flew it around the house last night for awhile, went to bed. got up this morning and went to get my new "Toy". I found that at some point last night I sort of "bent" one of the batteries. possibly in one of my many crashes last night. the battery still works, still takes a charge and still puts out a charge. so I'll continue to use it. thank god the batteries are so cheap! this thing really is fun. is it $153.00 fun? don't know yet. side note: yesterday my German Shepherd/Retriever was very wary of the drone and didn't want to be in the same room with it. this morning all the doors out of my living room are closed (because peeps are sleeping) so she just layed at my feet. that is until I lost control and almost hit my head with it. got control inches from my head. and as I was flying away, all of a sudden the dog went laying to a full jump and tried to take it out of the air. LOL. she was sort of fine with until she saw it "attack" me, or "threaten" me. (8 batteries for $40.00, Amazon, not bad).
No Beginner here I’m just starting over🧐😎. Captain if you confirm the controller will bind with a FRS D8 please let me know. Another very informative video. Thanks Captain
The manual says it defaults to D8 mode (out of the box) which means it should bind to Frsky D8 receivers. The online manual explains how to switch it to D16 mode for binding to such receivers.
14:31 -Would it be a problem if I used 450mAh (HV 4.35V) battery, instead of the 450mAh (HV 3.8V) like you showed? I want to get extra batteries for it.
So I just got my fix for glasses yesterday. I own the BetaFPV Cetus Lite kit (got it about a week ago) I tried using Armless reading glasses with the Cetus goggles. they sort of worked but after a few minutes they tended (about 50% of the time) to tilt on my nose inside the goggles. sometimes falling off entirely. my fix was to buy a comfort kit for a VR headset (Quest 2) by KIWI. its a padded face pad with glasses extension for VR goggles($19.99). I Duct taped them on. they hold solid. my regular glasses fit inside and the FPV goggles are very comfy. I'm hoping when upgrading to a bigger drone kit (I'm not a serious FPVer so my next kit will probably be the E_MAX EAZY Pilot Pro) that they will fit that as well.
This is awesome! I had to sell all my FPV gear last summer to help start my business. I have been sad ever since, so this will be a great kit to get back into it!
Thanks for another great video. A few years ago (🤔actually many years ago😟) I used to fly radio controlled model aeroplanes, panic biplanes to be precise. They were aerobatic planes fitted with fast petrol engines. I would practise aerobatics and have dog fights with other flyers using paper streamers attached to the planes (chew up you opponents streamer with your prop) Anyway with that model flying experience behind me do you think I would be OK with a drone or would I struggle, should I be looking at something like this as a starter or something else. Your opinion would be great, thank you. Dang how I wish mini cameras had been available back then.
Nice video cap, wow all the brands that make rtf fpv kit is getting more interesting Hey there is a new version of fimi x8 2022 that has 1/2 inch sensor, are you going to review it?
Hi ! As soon as I watched your video on the Emax Tinyhawk III, I purchased it and Subscribed to your Channel ! As I was trying to verify the binding I took the Canopy screws out in order to reach the Binding Button which is deep inside the Camera Canopy or Housing. After I verified the binding to my satisfaction I noticed a LOOSE RED CABLE ( measures about 1 - 1 1/2 inches long )on the rear right of the circuit board and it is soldered to a point on the Board which reads 5 V. I am not sure if this RED CABLE was already loose or if it goes to a certain soldering spot or if it is a convenient 5V output to be used on some modification...... I will like to know if your Emax Tinyhawk III has this loose cable of if it came loose when I was doing the binding... if it goes somewhere, where is it supposed to go ? The loose end show no wire coming out of it or any solder attached. Please help me out ! Thank you !
Yup, EMAX wanted to launch this drone today and anyone who received an advanced copy was only permitted to post their reviews all at the same time. Same thing DJI does.
If you are a beginner then stick with something you can use in your house as well as outside, and something that you don't mind destroying, because as a newbie, you'll destroy your FPV drone within a day or two unless you have some skills. Another option to consider is the BETAFPV CETUS PRO or CETUS X
@@CAPTAINDRONE798 thank you! I'm trying to make a gift to my brother. He's flown 2 drones but not a lot. He has crashed both so I'm trying to find something that will take a beating and not cheap quality. He flies outdoors. I'll take a look!
Yes. Unfortunately flying DJI drones gives you bad habits and poor hand/eye coordination, so you'd certainly have a learning curve both in learning how to fly a drone and understanding how the RC hobby works. Remember, DJI drones, as well as AUTEL and Hubsan are designed for beginners with zero experience... pull them off the shelf of the store, charge the batteries and go fly. The FPV hobby is like trying to drive a race motorcycle with no hands.
@@CAPTAINDRONE798 lol ok!!! I was excited by the price and all the things that came with it... I can tell you I paid much more for my drone and FPV goggles!!! Plus you wouldn't want to crash my drone like that lol!!! I like that you could fly it in the house I live in Michigan would love that option!!! Well I'm going to have to pick one up and improve on my hand eye coordination... Maybe get rid of my bad DJI habits lol!!!
I bought a couple of these for me and my neighbor. How do we get them on separate channels so we don't get interference while flying next to each other?
Are you saying they are on the same controller frequency (like you move a joystick and both drones move)? That would be odd. Now if you mean the same video frequency then that is normal and it is up to one of you to change that on the drone & goggles.
Hi Cap, Great vids and reviews!! Torn between TH3 and TinyGo, which do you recommend for beginners like me that wants to start on RTF kits? Both drones are almost in the same price point from where I live. Or should I go and buy separate goggles, radio & drone (eyeing on the Mobula6 or Eachine Trashcan) Thanks Cap!
Hi Captain drone hope all is well, would like your opinion on what Fpv google are best to buy. I have heard that the fat shark dominator hdo are the way to go.
The FATSHARKS I use in every video (HDO2) are the best on the market but very expensive, and they don't come with a video receiver, you have to purchase that separately. I use the RAPID FIRE system.
I honestly don’t know because with DJI it is just a simple software setting adjustment for a GPS drone where both sticks are centered. In the FPV hobby the left (throttle) joystick is not centered. See if you can download the manual
Thank you for great review. Do you happen to know if the Tx (E8?) is Mac compatible? Particularly for running simulator, but also to modify settings in Beta. Thanks if anyone knows the answer....
Hello, I have this kit but I would like a low cost 4 or 5 inch freestyle drone, if possible I would like to take advantage of the radio and the glasses, is there any way? Which do you recommend? I'm from Brazil! Friendly hug
The radio might work with the 5” Emax drones. You will have to look at the instructions to see how to put the radio in bind mode and check what receivers it can bind to. The goggles will work with any analog FPV drone. If you have learned how to fly the EMAX FPV drone without crashing, then if I were you I’d buy a 4-in-1 Radiomaster radio like a TX16s or Zorro or TX12. All 5” FPV drones are great so get one that you can afford. Also if you wish to fly father away from yourself you will need new FPV goggles.
@@CAPTAINDRONE798 I just hit him really tight, if I'm in I have enough control. Here in Brazil things are very expensive, but I will try to invest in other equipment and abandon this kit.
All was well with my tinyhawk 3 RTF, but suddenly the controls got reversed, throttle on the right. Can't figure out how to fix it, or how I broke it. I didn't mess around with Betaflight. Any ideas? Don't see anything in the manual.
@@CAPTAINDRONE798 Yes, I suspect the channel switched for the throttle somehow. Very annoying. Fixed it in Betaflight, but then the transmitter failed. Wouldn't charge. Sent it back.
Hiw do you record I press the record button once I'm done flying I take it out and then put the SD into an adapter and the adapter in my DVD player and it sais this devise is empty
If you don't see the RECORD red dot in your goggles then it probably is not recording which means you more than likely stuck an unreadable card in the unit like one that is WAY TOO BIG in size or formatted in a way that only your computer can read.
Yes, but in the world of the RC HOBBY, a drone, airplane, helicopter, car, truck, tank has a receiver, and that receiver has to speak the same language as the remote. This means you can use the controller, but only with specific receivers.
Oh bro... 🤦♂️ I just bought me the Emax TinyHawk Freestyle 2 a coupl'a weeks ago. Now this bloody thing comes out! But i gotta say, that's a pretty bloody sweet controller, i reckon. 😁 Surely this'll give GEPRC TinyGO a run for their money. I wonder if its sold drone & controller only. And if it also runs on 2s Emax batteries too.
so I got this drone but the beeper doesn't work and it won't show the battery voltage on the screen it says zero even when I fly is there a way to fix that
what's happen Steven just want thank you i just flew my dji Mavic Air 2 I'm blown away thank you for helping me decide through your video review thank you sir again
Hi again - would it be possible to connect different controllers to the tinyhawk? Not sure if you have a discord or something, I’d like to join it if so.
Every RC drone, helicopter, plane, tank, truck, car, boat on the planet has a receiver in it. The RECEIVER will speak one type of language. Every radio (controller) on the planet has a TRANSMITTER in it and the transmitter speaks a type of language. To answer your question, you can connect any RECEIVER and TRANSMITTER together if the speak the same language, so this means you have to find out which type of receiver is in the Tinyhawk and then find a remote that can speak to that receiver. So if your Tinyhawk has an ELRS receiver then you’d need an ELRS remote (also known as a Radio).
Hello so I got the emax tinyhawk 3 rtf kit just like this one the first day I got it it would not start. I'm pressing the arm button and nothing is happening is there a way to fix this without using beta flight
hello it's me again so I turned the drone on and set it on the table for a couple min then it started beeping so i unplugged it then plugged it back in and the screen went black I still see the battery voltage and all that stuff but there is no picture what do I do
Your battery needs to be recharged. Also NEVER leave the battery connected to the drone for very long when not flying as the VTX gets very hot and overheats.
Well… First of all … as a beginner myself… I call it Fascinating 😜… as far as the drone itself and the whole kit is concerned… impressive 👍 Here in Germany only the „old“ version no.2 is available… so I guess I wait 🙏🏻 Stay safe everybody…👋
I’d highly recommend new pilots know how to calibrate the gyro and fix trim through the remote. This will really make flying much more enjoyable. To have your tiny, just hover when you push up on the throttle rather then drift makes learning so much easier. Joshua did a great video on this: th-cam.com/video/otJNzZrE-yk/w-d-xo.html
Could you use this controller and headset for fixed wing flying? I was thinking of purchasing this plus a Zhod Nano Talon Evo. Could I get that out of this kit or would I have to get a different transmitter?
If your plane has an ANALOG FPV camera on it then the goggles would certainly work. The transmitter (radio or controller, whatever you refer to it as) may only work if your plane had an FRSKY D16 receiver in it.
I am coming from RC Cars I wonder with all those beginnen Kits, what parts of it can i use when start to Upgrade...is the Radio ok for that the goggles, etc looks to me like a very overheated market where you can sell any bullshit...so if I buy that kit, and and I want to build a drone by myself, or if I buy another drone, can i use goggles and radio? Isnt that the most important thing for a starter kit? So i am reading through the comments the Radio is ok but better gogglles
If you’re like me you started in the RC Car hobby with a crap car, controller and battery charger. Hopefully you saw the light and bought yourself a pile of Arrma and Traxxas vehicles as well as a rugged Spektrum controller, and let’s not forgot the massive wattage battery charger. So if you were deep into the RC car hobby you owned quality gear. The same is true in the FPV hobby. Everyone in the FPV drone hobby that were not previously into RC planes, had to start with the basics. The radio in this kit will bind with D8 and D16 Frsky receivers, so whatever drone you get you just have to ensure the receiver matches. The goggles work with any analog drone. Since you are a newbie you’re probably gonna destroy everything learning to fly, so like all of us who began with zero abilities, expect to either give up or stay in the hobby and buy drones that you can repair and fly.
Easily one of the best RTF starter kits you've reviewed on this channel. I'm impressed that the goggles still have some utility even if you want to purchase a more advanced set to replace them. Only other goggles I know that can do that would be Eachine's EV800D and the FXT Viper. Still not quite as impressive as the Novice IV kit, but this is roughly half the price so that's something to consider. Thanks for the great review as always!
Finally, Emax's tinyhawk III!
Its superb that they made the new version in a short period of time!
As Tinyhawk II is not that old.
Their RTF kits are amazing and the tinyhawks' mass is same as always...
Negligible like one is holding a paper!
Controller is really beautiful...
And the goggles are also mind blowing!!!
Never knew that it was that good.
Looks really stable indoors...
I like these types of drones which are really small amazing cinewhoops, which are durable, that can do impressive and astonishing cool things and also costs not much!
Two years i have abused crashed and enjoyed the tiny hawk 2, still original everything, a great beginner drone.
so this one will be a great buy.
I just ordered one of these, an upgrade from my Makerfire Micro FPV Shark drone. Love that little blue bugger but I think this'll be a great upgrade. Thanks for the review!
I just ordered mine. I had a wonderful time with my Hubsan Zino GPS drone but now it's time to start doing stunt FPV.
I could have the drone tomorrow in another store if I want, however one store is closed for 2 weeks and they give 15% discount on all orders while closed.
I'm a patient man.
@@Mental_Illboy hey man, how is it 1 year later?
@L0wSkiller It's really really hard. So hard that I've sold it and bought the (more expensive) DJF FPV. Because that one has a GPS hover mode.
It's possible but very hard with the tiny hawk.
Love my tinyhawk II.. this seems to have a lil better camera and less kV motors less power & longer flight time.. outside seems the same. Looks tiny bit different. I use my old tinyhawk ii rtf case for x9 lite transmitter and 03o goggles
Well, I did it I pulled the trigger I purchased this today! All because of Captain Drones review. Rhank you very much sir.
Glad I could help! Enjoy!
Another great Video! And to top it off, my stickers arrived all the way over here in the UK today! Thanks Steve & Nikki!
You're most welcome!
Nice review. The only things I would have liked you to cover was flying it with the included display and it’s indoor and outdoor ranges.
Was about to order the tinygo but since this drones controller is compatible with other drones I might go with the tiny hawk
Love my TH3. The dogs snatched it out of the air a few too many times and the frame is cracked in several places. I like to fly it outdoors in a stiff gusty breeze. It shimmies when the wind kicks up because of the broken frame, but it still flies great. Reminds me of the movie "Batteries Not Included" where the heroic little injured drone was trying to fly. Probably will get another frame for it, but have been looking for something similar in an ARF. I've been watching your beginner videos but you are so enthusiastic, it is hard to make a decision based on your glowing reviews.
Great review Captain i think i might venture into the FPV world with this piece of kit. Thanks for the review, Cheers from Australia
Best review I've seen so far for a fpv beginner. If I order it now from banggood. I might get it by spring here in the US. I wish Amazon would have these. Thanks Cap't!!
Thanks! Good news. In the past 4 months products shipped from Banggood by postal have been showing up within two to three weeks vice the 3 months.
@@CAPTAINDRONE798 That is good news TY. So many other items from them I thought about. 3weeks WOW. Years ago it was 6 to 8 weeks. Appreciate the info.
i think this is the best beginner kit shown to date, especially because there is a screen and no need to have a cell phone, just because of that i'd consider it even not being a beginner
I love this video so much because I’m geting the tiny hawk 3 tomorrow so thank you so much for this video
Am I understanding correctly that the only video you can record with this one over say a GEPRC TinyGO 4K, is the analog video that the goggles see? I feel like thats a huge difference between the two if so. Im struggling between them both right now and cannot make up my mind!
I was looking at the BETAFPV Cetus Lite FPV Drone after your review, but now I'm looking at this Tiny Hawk 3.... I love your enthusiasm. I'm just looking for a drone to mess around with inside my house. not sure I won't have motion sickness with FPV. I get a little VR sickness with my VR headset when doing Flight sims or Roller Coasters sims. but only when not looking straight ahead when doing those sims (ie. if I turn my head while flying a plane to watch an enemy plane go down or look to the side when on a Roller Coaster to watch scenery go by). if I look straight ahead my stomach is fine.
I bought the Betafpv Cetus lite. came today. "OMG that thing is tiny!" (first thoughts upon opening the box). I charged everything. was so happy the batteries only take 20 minutes to charge. never having flown anything RC before I was very careful with my first take off from my coffee table. not sure why but the thing tends to "jump" into the air. after hours of practice, it still jumps into the air. by jump I mean about 6" from resting to airborne. I thought I saw you do a smooth take off. anyway, the "jump" doesn't bother me that much. flying around the house minus the goggles was fun! after I was able to complete a circuit of my living room and kitchen several times without getting confused as to what joystick does what I decided to try the Goggles. I wear glasses but I have a pair of Arm less reading glasses ($9.99 Amazon) that clip onto my nose. they worked great! fit right into the headset. I was able to fly around the same living room and kitchen. it was a blast of a day! get the oval arm less reading glasses not the rectangle ones. THANKS for your review. I think I'm on my way to a new hobby.
its the next day, I flew it around the house last night for awhile, went to bed. got up this morning and went to get my new "Toy". I found that at some point last night I sort of "bent" one of the batteries. possibly in one of my many crashes last night. the battery still works, still takes a charge and still puts out a charge. so I'll continue to use it. thank god the batteries are so cheap! this thing really is fun. is it $153.00 fun? don't know yet. side note: yesterday my German Shepherd/Retriever was very wary of the drone and didn't want to be in the same room with it. this morning all the doors out of my living room are closed (because peeps are sleeping) so she just layed at my feet. that is until I lost control and almost hit my head with it. got control inches from my head. and as I was flying away, all of a sudden the dog went laying to a full jump and tried to take it out of the air. LOL. she was sort of fine with until she saw it "attack" me, or "threaten" me. (8 batteries for $40.00, Amazon, not bad).
No Beginner here I’m just starting over🧐😎.
Captain if you confirm the controller will bind with a FRS D8 please let me know. Another very informative video.
Thanks Captain
The manual says it defaults to D8 mode (out of the box) which means it should bind to Frsky D8 receivers. The online manual explains how to switch it to D16 mode for binding to such receivers.
@@CAPTAINDRONE798 this is great information 🤝
I tried to order 2 of the tinyhawk 2 kits and both were cancelled on me. Maybe it was a sign :)
14:31 -Would it be a problem if I used 450mAh (HV 4.35V) battery, instead of the 450mAh (HV 3.8V) like you showed? I want to get extra batteries for it.
There would be no problem.
So I just got my fix for glasses yesterday. I own the BetaFPV Cetus Lite kit (got it about a week ago) I tried using Armless reading glasses with the Cetus goggles. they sort of worked but after a few minutes they tended (about 50% of the time) to tilt on my nose inside the goggles. sometimes falling off entirely. my fix was to buy a comfort kit for a VR headset (Quest 2) by KIWI. its a padded face pad with glasses extension for VR goggles($19.99). I Duct taped them on. they hold solid. my regular glasses fit inside and the FPV goggles are very comfy. I'm hoping when upgrading to a bigger drone kit (I'm not a serious FPVer so my next kit will probably be the E_MAX EAZY Pilot Pro) that they will fit that as well.
Cool! Thanks for sharing
Ah that's the starter kit I need as a glasses wearer .Sweet !
This is awesome! I had to sell all my FPV gear last summer to help start my business. I have been sad ever since, so this will be a great kit to get back into it!
Thanks for another great video.
A few years ago (🤔actually many years ago😟) I used to fly radio controlled model aeroplanes, panic biplanes to be precise. They were aerobatic planes fitted with fast petrol engines. I would practise aerobatics and have dog fights with other flyers using paper streamers attached to the planes (chew up you opponents streamer with your prop) Anyway with that model flying experience behind me do you think I would be OK with a drone or would I struggle, should I be looking at something like this as a starter or something else. Your opinion would be great, thank you. Dang how I wish mini cameras had been available back then.
Question for you, Captain: Do most FPV radios allow for stick mode 3? As I lefty I've flown mode 3 since I began my drone journey.
I would think YES since most radios can be configured to any Mode both physically and in the radio settings.
I still think that this review is probably one of the best reviews on this kit.
Thank you!
Not sure if you have a video for this already, but I would be curious to know how you compare this to the GepRC TinyGo RTF
The Tinygo is an older drone with a selling feature of an onboard DVR to film.
Emax Tinyhawk 3 Freestyle RTF kit? Please Emax!
Nice video cap, wow all the brands that make rtf fpv kit is getting more interesting
Hey there is a new version of fimi x8 2022 that has 1/2 inch sensor, are you going to review it?
I did tell the company I would review it, but have not seen it.
Hi ! As soon as I watched your video on the Emax Tinyhawk III, I purchased it and Subscribed to your Channel ! As I was trying to verify the binding I took the Canopy screws out in order to reach the Binding Button which is deep inside the Camera Canopy or Housing. After I verified the binding to my satisfaction I noticed a LOOSE RED CABLE ( measures about 1 - 1 1/2 inches long )on the rear right of the circuit board and it is soldered to a point on the Board which reads 5 V. I am not sure if this RED CABLE was already loose or if it goes to a certain soldering spot or if it is a convenient 5V output to be used on some modification...... I will like to know if your Emax Tinyhawk III has this loose cable of if it came loose when I was doing the binding... if it goes somewhere, where is it supposed to go ? The loose end show no wire coming out of it or any solder attached. Please help me out ! Thank you !
That is probably your antenna
Hello is this kit better than the Cetus Pro kit?
Which is better, the tinyhawk 3 or the tinygo 4k?
7 reviews for this all in 5 min lol. Thanks for representing us Canadian folks haha. Great review as always 👍
Yup, EMAX wanted to launch this drone today and anyone who received an advanced copy was only permitted to post their reviews all at the same time. Same thing DJI does.
Hi Rick air2 s army out
How about this compare with Cetus Pro FPV Kit😁
What do I choose? This or the cetus fpv pro ?
What are your thoughts on the GEPRC TinyGO 4K FPV vs Tinyhawk III FPV Racing Drone?
If you are a beginner then stick with something you can use in your house as well as outside, and something that you don't mind destroying, because as a newbie, you'll destroy your FPV drone within a day or two unless you have some skills. Another option to consider is the BETAFPV CETUS PRO or CETUS X
@@CAPTAINDRONE798 thank you! I'm trying to make a gift to my brother. He's flown 2 drones but not a lot. He has crashed both so I'm trying to find something that will take a beating and not cheap quality. He flies outdoors. I'll take a look!
Is this kit better than the Cetus pro kit
Can you use a Tinyhawk 3 Remote and goggles with the bind and fly tiny hawk 2 freestyle?
Probably, but I've never tried it
what's the best antenna upgrade I can get for the googles
I have DJI phantom 4 pro and I've noticed FPV drone have a different throttle... Is this a giant learning cure compared to the DJI?
Yes. Unfortunately flying DJI drones gives you bad habits and poor hand/eye coordination, so you'd certainly have a learning curve both in learning how to fly a drone and understanding how the RC hobby works. Remember, DJI drones, as well as AUTEL and Hubsan are designed for beginners with zero experience... pull them off the shelf of the store, charge the batteries and go fly. The FPV hobby is like trying to drive a race motorcycle with no hands.
@@CAPTAINDRONE798 lol ok!!! I was excited by the price and all the things that came with it... I can tell you I paid much more for my drone and FPV goggles!!! Plus you wouldn't want to crash my drone like that lol!!! I like that you could fly it in the house I live in Michigan would love that option!!! Well I'm going to have to pick one up and improve on my hand eye coordination... Maybe get rid of my bad DJI habits lol!!!
How long is average flight time before it dies ?
Excellent Review, and Excellent Flying Of The Emax Tinyhawk 3. Excellent Value! Thank You.
Can two head sets be used with one drone? I would like to give a tour to several people in real time with a drone. Will TIny Hawk III support that?
Yes. When you fly an Analog FPV drone there is no limit to the number of people that can tune into the signal.
I bought a couple of these for me and my neighbor. How do we get them on separate channels so we don't get interference while flying next to each other?
Are you saying they are on the same controller frequency (like you move a joystick and both drones move)? That would be odd. Now if you mean the same video frequency then that is normal and it is up to one of you to change that on the drone & goggles.
Should I get tinyhawk 3 rtf or babyhawk 2 rtf on banggood
Hi, can I use the DJI V2 goggles?
drones are hard to find in Australian stores, not sure if its due to the chip shortage or covid related :(
Hi Cap,
Great vids and reviews!!
Torn between TH3 and TinyGo, which do you recommend for beginners like me that wants to start on RTF kits? Both drones are almost in the same price point from where I live.
Or should I go and buy separate goggles, radio & drone (eyeing on the Mobula6 or Eachine Trashcan)
Thanks Cap!
Tiny Hawk 3 has a drone that can be smashed around and still survive. All beginners in the FPV hobby crash their drones a heck of alot.
@@CAPTAINDRONE798 Thanks for the reply Cap, you're awesome. I'll definitely consider this!
i was wondering what type of goggles are capable with the drone and also glasses friendly?
For FPV goggles any Analog goggles will work. As for glasses, it is hit and Miss due to the size of your head and size of glasses you wear.
Are there any more upcoming RTF kit videos? I'm loving them
Yes, two more.
Brilliant 👏
Can I just buy the controller and goggles and use it with my Tinyhawk II?
Probably but it may not be cost effective
Hi Captain drone hope all is well, would like your opinion on what Fpv google are best to buy. I have heard that the fat shark dominator hdo are the way to go.
The FATSHARKS I use in every video (HDO2) are the best on the market but very expensive, and they don't come with a video receiver, you have to purchase that separately. I use the RAPID FIRE system.
I like the simplicity. But as a beginner, I'll be starting out with digital because like the clearer image.
great video is it possible to fly in stick mode 3 on this drone? Been wanting to try FPV and unfortunately fly mode 3 on DJI. Thanks
I honestly don’t know because with DJI it is just a simple software setting adjustment for a GPS drone where both sticks are centered. In the FPV hobby the left (throttle) joystick is not centered. See if you can download the manual
To me Emax has some of the best drones especially for beginners
Can you still run it with a 2s?
Not sure
Detachable display idms great
Total flight time and distance? Looks nice
Which is better for first fpv? GEPRC TinyGO Racing FPV or the new tinyhawk 3?
You saw the Tinyhawk 3 and detachable display... you decide.
Thank you for great review. Do you happen to know if the Tx (E8?) is Mac compatible? Particularly for running simulator, but also to modify settings in Beta. Thanks if anyone knows the answer....
Please review polltar jt drone, its cheap but good camera and stabilizer, cheaper than mavic mini
Hello, I have this kit but I would like a low cost 4 or 5 inch freestyle drone, if possible I would like to take advantage of the radio and the glasses, is there any way? Which do you recommend? I'm from Brazil! Friendly hug
The radio might work with the 5” Emax drones. You will have to look at the instructions to see how to put the radio in bind mode and check what receivers it can bind to. The goggles will work with any analog FPV drone.
If you have learned how to fly the EMAX FPV drone without crashing, then if I were you I’d buy a 4-in-1 Radiomaster radio like a TX16s or Zorro or TX12. All 5” FPV drones are great so get one that you can afford. Also if you wish to fly father away from yourself you will need new FPV goggles.
@@CAPTAINDRONE798
I just hit him really tight, if I'm in I have enough control. Here in Brazil things are very expensive, but I will try to invest in other equipment and abandon this kit.
What is the total flight time?
When do we get to see Miss captain drone
She was in my older videos from several years ago when we were younger. You can see her in this one: th-cam.com/video/EqmSYiihZ9k/w-d-xo.html
She looks like a vary nice copilot, loved the video
Thanks mate.
Is the controller better than the original white one in the rtf kit?
Thanks again 👍
Yes, much better
@@CAPTAINDRONE798 happy days!
Thanks Captain 😁👍
nice review. I'm interested in flying FBV. This looks like a fun one to learn on. Thanks again
Do it mate - you’ll never look back I promise you 👍🤜🏻🤛🏻
Are the goggles and controller for this compatible with the Tinyhawk 2 freestyle?
Goggles yes. Controller.... probably, but I've never tried it.
The video flickers and freezes at times as seen, is this how the video recording will playback .
Yes, that is analog FPV. Your brain does not notice it when you fly since you are more concentrating on where you are flying.
You can fly 2s on the th3 aswell. No one on youtube has done it
Is this little fpv capable of carrying an Insta or a small cam?
Not really
Could the heads up display and controller work with other drones?
I believe it works with all drones that have a D8 or D16 receiver in them that you can bind to.
Hi,
I have a question.
I want to start with a FPV drone beginner.
I doubt to buy the tinyhawk III or the geprc Tiny go.
What should you buy?
Thanks
Buy the one you can afford because as you learn to fly you are going to destroy it.
Try disarming in the air and arm it back
hey cap, are the radio controller and FPV goggles good enough to use in the long term? For example if I buy a new drone will they bind to it?
Yes as long as:
- the drone has analog video
- the receiver is a D8 or D16 FRSKY
@@CAPTAINDRONE798 thanks a bunch!
What other googles can be used with this and how do you hook them up?
Any ANALOG googles can be used. You just tune into the channel like an old school radio.
All was well with my tinyhawk 3 RTF, but suddenly the controls got reversed, throttle on the right. Can't figure out how to fix it, or how I broke it. I didn't mess around with Betaflight. Any ideas? Don't see anything in the manual.
That is a question for EMAX. Seems like you went from a MODE 1 to a MODE 2.
@@CAPTAINDRONE798 Yes, I suspect the channel switched for the throttle somehow. Very annoying. Fixed it in Betaflight, but then the transmitter failed. Wouldn't charge. Sent it back.
It's sad I didn't discover this channel before. Thanks for the amazing reviews 👍
Thank you for that & welcome to the channel!
Another good review Steve. Neat little drone.
Do you know if the controller is compatible with drone simulator?
Yes it works with simulators
Can the Tiny Hawk 3 controller bind with the Tiny Hawk freestyle drone?
Probably, I think the freestyle is a FRSKY D8 so it probably would work
Hiw do you record I press the record button once I'm done flying I take it out and then put the SD into an adapter and the adapter in my DVD player and it sais this devise is empty
If you don't see the RECORD red dot in your goggles then it probably is not recording which means you more than likely stuck an unreadable card in the unit like one that is WAY TOO BIG in size or formatted in a way that only your computer can read.
@@CAPTAINDRONE798 ok but how do you record maybe I'm doing something wrong
Newbie question: Is the controller compatible with other FPV drones? Great video!
Yes, but in the world of the RC HOBBY, a drone, airplane, helicopter, car, truck, tank has a receiver, and that receiver has to speak the same language as the remote. This means you can use the controller, but only with specific receivers.
Oh bro... 🤦♂️
I just bought me the Emax TinyHawk Freestyle 2 a coupl'a weeks ago. Now this bloody thing comes out!
But i gotta say, that's a pretty bloody sweet controller, i reckon. 😁
Surely this'll give GEPRC TinyGO a run for their money.
I wonder if its sold drone & controller only.
And if it also runs on 2s Emax batteries too.
so I got this drone but the beeper doesn't work and it won't show the battery voltage on the screen it says zero even when I fly is there a way to fix that
If it is brand new, you then need to contact EMAX.
what's happen Steven just want thank you i just flew my dji Mavic Air 2 I'm blown away thank you for helping me decide through your video review thank you sir again
Glad you are enjoying it!
Hi again - would it be possible to connect different controllers to the tinyhawk?
Not sure if you have a discord or something, I’d like to join it if so.
Every RC drone, helicopter, plane, tank, truck, car, boat on the planet has a receiver in it. The RECEIVER will speak one type of language. Every radio (controller) on the planet has a TRANSMITTER in it and the transmitter speaks a type of language. To answer your question, you can connect any RECEIVER and TRANSMITTER together if the speak the same language, so this means you have to find out which type of receiver is in the Tinyhawk and then find a remote that can speak to that receiver. So if your Tinyhawk has an ELRS receiver then you’d need an ELRS remote (also known as a Radio).
@@CAPTAINDRONE798 thanks once again. Much appreciated.
how much range do you usually get with it? i can barely get 50 meters without it losing signal is that normal?
If outdoors and no interference, with a direct line of site, expect 100 meters.
@@CAPTAINDRONE798 ok thanks, im very new to drones and fpv drones, i might just have my antennas on the goggles set up wrong or something
Awesome thanks, I am looking to get into FPV and this would be perfect
Do it mate, it’s so immersive it’s incredible 👍🤜🏻🤛🏻
Hello so I got the emax tinyhawk 3 rtf kit just like this one the first day I got it it would not start. I'm pressing the arm button and nothing is happening is there a way to fix this without using beta flight
It should work perfectly out of the box. Are you sure you have your JOYSTICK on the left all the way down, and have you read the instructions fully?
@@CAPTAINDRONE798 wow thank you, it works I did not know that you have to keep the left stick down
@@dmitriyivanov4368 Yes in the FPV hobby, for safety reasons, a drone won’t arm if the throttle is above zero.
Which microSD card will work?
Any class 10 card that is 8, 16, 32 gigs
Qual a velocidade máxima ? E distância ??
hello it's me again so I turned the drone on and set it on the table for a couple min then it started beeping so i unplugged it then plugged it back in and the screen went black I still see the battery voltage and all that stuff but there is no picture what do I do
Your battery needs to be recharged. Also NEVER leave the battery connected to the drone for very long when not flying as the VTX gets very hot and overheats.
@@CAPTAINDRONE798 ok thanks
Doesn't the connection swivel around ?
What do you mean “connection swivel around” ???
What is the Flying time for this Drone..
1S Lipo Battery with brushless motors, so expect a minimum of 3 minutes. All depends on how you fly if you wish to extend the flight time.
Well…
First of all … as a beginner myself…
I call it Fascinating 😜… as far as the drone itself and the whole kit is concerned… impressive 👍
Here in Germany only the „old“ version no.2 is available… so I guess I wait 🙏🏻
Stay safe everybody…👋
In Deutschland könnten wir die überall fliegen oder?
I’d highly recommend new pilots know how to calibrate the gyro and fix trim through the remote. This will really make flying much more enjoyable. To have your tiny, just hover when you push up on the throttle rather then drift makes learning so much easier. Joshua did a great video on this: th-cam.com/video/otJNzZrE-yk/w-d-xo.html
Do you think it would fly with a 360 pro
Could you use this controller and headset for fixed wing flying? I was thinking of purchasing this plus a Zhod Nano Talon Evo. Could I get that out of this kit or would I have to get a different transmitter?
If your plane has an ANALOG FPV camera on it then the goggles would certainly work. The transmitter (radio or controller, whatever you refer to it as) may only work if your plane had an FRSKY D16 receiver in it.
@@CAPTAINDRONE798 I see, thank you.
Can you use the controller on a simulator
If you can, then I would have mentioned it and/or shown it in the video
I am coming from RC Cars I wonder with all those beginnen Kits, what parts of it can i use when start to Upgrade...is the Radio ok for that the goggles, etc looks to me like a very overheated market where you can sell any bullshit...so if I buy that kit, and and I want to build a drone by myself, or if I buy another drone, can i use goggles and radio? Isnt that the most important thing for a starter kit? So i am reading through the comments the Radio is ok but better gogglles
If you’re like me you started in the RC Car hobby with a crap car, controller and battery charger. Hopefully you saw the light and bought yourself a pile of Arrma and Traxxas vehicles as well as a rugged Spektrum controller, and let’s not forgot the massive wattage battery charger. So if you were deep into the RC car hobby you owned quality gear. The same is true in the FPV hobby. Everyone in the FPV drone hobby that were not previously into RC planes, had to start with the basics. The radio in this kit will bind with D8 and D16 Frsky receivers, so whatever drone you get you just have to ensure the receiver matches. The goggles work with any analog drone. Since you are a newbie you’re probably gonna destroy everything learning to fly, so like all of us who began with zero abilities, expect to either give up or stay in the hobby and buy drones that you can repair and fly.
@@CAPTAINDRONE798 thx