I've got a Puncher Breaker too, and when you remove the stock, you can pop out the plastic cover on the end of the handle, it's made for that (and it helps you put the screw and toothed washers back in place ;-) )
Neal Tressler Yep, you put the short end of the provided allen key in the hole, and you make lever with it to pop out the cap! Requires a bit of force but dont worry, it will just slightly deform the hole, but only once, then you can do it over and over again without risking any damage, the plastic is """ kind of"""" rubbery
Hey bud I just did that to mines I did over do it (shot on its own) lol but I gave it like half a turn till it cocked gave it a slap and YAY it didn't fire off alone. It got really really light! Plus I took off the little spring on the trigger rod. Short first stage hardly any tension on it but there is a pull to it but clean stop and BOOM breaks nicely.
The black plug comes off just turn alien wrench around and pull up also since the stock is off on the end of action find a flat bald screw about 1/2in across tighten it up it's the hammer spring will increase fps tighten all the way back off 1 or 2 times you should get 150 to 175 fps more
Your right I just got the plug off! I tried it earlier but didn’t pull hard enough and was afraid I was going to break it. Thanks for the tips I’m going to try increasing the power the weekend.
It's real easy just tighten the screw until you can't cock it then start backing it off 1/2 turn at a time till you can then your done if you have any problems with anything with this gun let me know I'm sure I can help also there is a upgraded cocking lever made out of billet aluminum there cheap it's the weak part of these guns hood shoot in look on my channel for more info
Hey boss I got a question for you which gun did you like better hot sun bulldog or the puncher breaker which gun did you like the best nobody will say I was looking at the bulldog with the wooden stock and then it seems awful heavy it's almost 11 pounds I don't like heavy air gun so what do you think
I don't know for you, but I could get the trigger to be pretty light, also I didn't keep it this way, I'd rather have it a little heavier and have No worry about misfire while I carry the gun. Also, with the trigger set up lighter than factory settings, the safety became pretty useless, it just makes the trigger harder to pull, but that's about it, do you have the same issue?
I've got a Puncher Breaker too, and when you remove the stock, you can pop out the plastic cover on the end of the handle, it's made for that (and it helps you put the screw and toothed washers back in place ;-) )
Hadrien Berthet hey man good tip... do you just pop it out from the inside?
Neal Tressler Yep, you put the short end of the provided allen key in the hole, and you make lever with it to pop out the cap! Requires a bit of force but dont worry, it will just slightly deform the hole, but only once, then you can do it over and over again without risking any damage, the plastic is """ kind of"""" rubbery
Very very good video. Simple easy and well explained. Thank you !
Thank you for your video, it helped me adjust the trigger on my Kral Puncher Jumbo Hi Cap.. Thanks again 👍👍👍
Glad it helped
It really did help me out.. It was the only video that showed you what to 👍👍 I'm a new to air guns, so every liitle bits help.. Thanks again.. 👍👍👍
I've put many shot through mine. There is a spring on the shaft that connects the trigger to the mechanism I removed it to lighten the first stage up.
Thanks! I don’t mind the first stage but I wish I could get the second a little lighter.
Thank you for your video, it really helped me!
My brother has one also has had good luck, I would like to order one I think they have that issue fixed finally.
Hey bud I just did that to mines I did over do it (shot on its own) lol but I gave it like half a turn till it cocked gave it a slap and YAY it didn't fire off alone. It got really really light! Plus I took off the little spring on the trigger rod. Short first stage hardly any tension on it but there is a pull to it but clean stop and BOOM breaks nicely.
The black plug comes off just turn alien wrench around and pull up also since the stock is off on the end of action find a flat bald screw about 1/2in across tighten it up it's the hammer spring will increase fps tighten all the way back off 1 or 2 times you should get 150 to 175 fps more
Your right I just got the plug off! I tried it earlier but didn’t pull hard enough and was afraid I was going to break it. Thanks for the tips I’m going to try increasing the power the weekend.
It's real easy just tighten the screw until you can't cock it then start backing it off 1/2 turn at a time till you can then your done if you have any problems with anything with this gun let me know I'm sure I can help also there is a upgraded cocking lever made out of billet aluminum there cheap it's the weak part of these guns hood shoot in look on my channel for more info
What size allen key did you use to adjust 2nd stage?
I’m afraid I haven’t owned the Kral for a long time, sorry I don’t remember!
Hey boss I got a question for you which gun did you like better hot sun bulldog or the puncher breaker which gun did you like the best nobody will say I was looking at the bulldog with the wooden stock and then it seems awful heavy it's almost 11 pounds I don't like heavy air gun so what do you think
I don't know for you, but I could get the trigger to be pretty light, also I didn't keep it this way, I'd rather have it a little heavier and have No worry about misfire while I carry the gun. Also, with the trigger set up lighter than factory settings, the safety became pretty useless, it just makes the trigger harder to pull, but that's about it, do you have the same issue?
Is the picatinny rail on top made of plastic or metal?
metal
My puncher misfires and I made the trigger firmer. I my pumvhrr shouldn't misfitr
Any problems with the valve breaking or have they fixed this issue
Not yet but I haven’t shot it enough to break it, lol!
500 shoot and it breaks. . No answer from kral. ..
Vinny C mine breaks at 200 shots i return it i got a new one i shoot like 500 times stills good i hope last because i love this gun.
Very helpful. Thanks much!!
Really not useful at all as it’s filmed so far away you might as well be on mars! Needs more close up work 😮