Had a similar problem with my fix 18 pellet mag found the centre post was rubbing on the collar that fits over it opened the collar up a little with a slightly bigger drill with may hand and problem was completely fixed.
Hi thanks for the help but I know ultimately it's gonna happen again because these so cheaply made of plastic, can I ask where did you purchase the after market kral magazine, as long term I think that's the way to go. Thanks.
I would have thought it would be better to keep the magazine very clean as the type of plastic used to make them has a self lubricating property and I don’t mean actual lubricant, adding to will attract dust and dirt and getting pretty nasty which will transfer to the barrel in the long run adjusting the spring or use wet and dry on the parts that rub and try to keep the surfaces very clean.
@@k.s.airguns-airgunpestcont4680 mine also clicks half way round! Nice video thou...Located at no.11 I notice a little plastic piece in the groove, mine has worn (with very little usage) I guess this is the problem. Where it connects to front piece via the metal pin.
Who would have thought a bit of lube and a vigorous rub could sort out a sticky load?
Nice DIY fix matey 👍🏻
Hahaha, who'd have thought it 😂😂
Thanks I'm going to try that been trying to get new mag's but can't find them so again thanks
Thank you so much. This worked for my Artemis magazine. For months i have been shooting using single tray.
You're welcome, thanks for watching
Thanks my friend, I have/had the same problem with my Kral. Greetings from the Netherlands.
Greeting to you too my friend
Nice one! Just saved me a nightmare
Very useful info. Opened mine´s clean and lube it, then 100% ok...thanks!!!!
Great work. Please share who to fix leaking problem of kral
Great tip but my mag is it has lost its rrturn spring pressure just moves with no tension😢
What about if the spring is slipping back as you turn it round ? , mine's doing this
Had a similar problem with my fix 18 pellet mag found the centre post was rubbing on the collar that fits over it opened the collar up a little with a slightly bigger drill with may hand and problem was completely fixed.
Good stuff buddy
That's a big help got 2 doing the same thing
Glad it helped, thank for the comment
Excellent advice 👍
Thank you sir..i appriciate your help🙏
No problem at all, thanks for your message.
Hi thanks for the help but I know ultimately it's gonna happen again because these so cheaply made of plastic, can I ask where did you purchase the after market kral magazine, as long term I think that's the way to go. Thanks.
Hi, if you Google Carm magazines, he now does a number of different models and colours.
@@danhattersley6213 Great thanks for your help.
What is the name of the after market magazine
I would have thought it would be better to keep the magazine very clean as the type of plastic used to make them has a self lubricating property and I don’t mean actual lubricant, adding to will attract dust and dirt and getting pretty nasty which will transfer to the barrel in the long run adjusting the spring or use wet and dry on the parts that rub and try to keep the surfaces very clean.
Thanks for the feedback, all I can say is that it works for me and they've be faultless ever since.
what type of spring is that ? size and diameter pls ?
Top tips
Thanks for the comment
Thank you👋
You're welcome
Can't even load my mag it clicks out half way round.
Where are you located William?
@@k.s.airguns-airgunpestcont4680 mine also clicks half way round! Nice video thou...Located at no.11 I notice a little plastic piece in the groove, mine has worn (with very little usage) I guess this is the problem. Where it connects to front piece via the metal pin.