your absolutely correct about Steve, his format & how he delivers the information on the guns he review is excellent..i was just looking at this kral, i really like like this gun...
TH, Looking forward to the end results. I have a .22 P/breaker (mkii) with a regulator, nothing else was done to the rifle. I get 3/4 inch group at 75yard consistantly.
Are you 100% shore? The end is not the barrel. Its just a adapter. Inside there is simular like Kral Punsher Breaker. Take a look. Kral have only one model of the design of the barrel. I got the pro 500. Same shroud.
First you got the adapter for silencer. Then you have the look a like barrel adapter. In Sweden we must have licens for silencer so I was wery suprise to find silencermode in the front.
Just received mine. In .25. Very nice quality in the stock. I have the new trigger and hopefully hardened valve stem Lol. Shooting very accurate out the box. Only complaint is the slop in the cocking lever. When cocked back, it has slop. I am thinking of shimming it with a peace of refrigerant hose, like the kind used to make a t port on the 2240/2250 crosmans. A aluminum or metal replacement would be awesome. Is there one available? Also, what are the demotions of the shroud? I like to make a carbon fiber replacement. Do you sell or make the thread cap protector? I just like to have the shroud look. Boy any baffling as im in Canada. Thanks for any response.
On that build I put a spacer inside the hammer to add spring tension. The hammer is longer than the other guns and you can only tighten up the rear adjuster a small amount before the gun won't cock. I also reshaped the poppet head in the valve to reduce surface area so it opens easier.
@@AnnihilatorAirguns I played with hammer tentions on other projects. Its a fine line with them not catching the hammer. I've also cut and shaped, valve stems. And modded the valves. So I have a bit of experience in the tinkering area 👍. This is my first pcp, and don't want to mess with it to much. I've converted guns and poured a lot of $$ into them, trying to get to that pcp level. Lol
troy did you see the super jumbo is out? 500cc and 250 bar. still looking for the manufacturer number for the :unique" fill adapter for my jumbo .22 which broke. please can you help
arthur sannella I'm not sure if I can help with the factory fill adapter. May be able to convert it to a standard foster fitting. Email me some pictures of where it's broken and we'll start there. I'm hoping the new rifles make it state side soon.
A frend of mine has a Daystate 22cal and a Brocock Capatto 22cal , and I out shoot him on targets 75 to 85 yards all the time with my 300 dollar Gauntlet 22cal tuned and upgraded regulator , it pisses him off
I want a kral gun so badly can't wait
your absolutely correct about Steve, his format & how he delivers the information on the guns he review is excellent..i was just looking at this kral, i really like like this gun...
Can you put a video on showing how you open up the ports
TH, Looking forward to the end results. I have a .22 P/breaker (mkii) with a regulator, nothing else was done to the rifle. I get 3/4 inch group at 75yard consistantly.
Carabina muito bonita
Thank you!
I need to purchase one of those bad boy 25cal Kral Jumbo ,
Can't wait to see how it turns out, Troy.
What is your opinion on the puncher pro 500 is it tunable value your opinion thank you
It's my favorite of all the Kral guns right now.
The barrel is shorter so if you take away the 1/2 /20 it will be a silencer mode inside the shround.👍
On the US models the barrel is the full length of the shroud and that wouldn't work.
Are you 100% shore? The end is not the barrel.
Its just a adapter.
Inside there is simular like Kral Punsher Breaker.
Take a look.
Kral have only one model of the design of the barrel.
I got the pro 500.
Same shroud.
First you got the adapter for silencer.
Then you have the look a like barrel adapter.
In Sweden we must have licens for silencer so I was wery suprise to find silencermode in the front.
@@janjohansson6040 I'm 100% certain. The jumbo has a longer barrel. You are correct on the Pro500 though.
Ok. All good Troy!
You are awesome!
Good Night from Sweden
Just received mine. In .25. Very nice quality in the stock. I have the new trigger and hopefully hardened valve stem Lol.
Shooting very accurate out the box. Only complaint is the slop in the cocking lever. When cocked back, it has slop. I am thinking of shimming it with a peace of refrigerant hose, like the kind used to make a t port on the 2240/2250 crosmans. A aluminum or metal replacement would be awesome. Is there one available? Also, what are the demotions of the shroud? I like to make a carbon fiber replacement. Do you sell or make the thread cap protector? I just like to have the shroud look. Boy any baffling as im in Canada. Thanks for any response.
hi troy its john from new york i was wondering if you ever posted my results after the new tune
Now how you get a bit more power? Besides opening up the transfer port. What else is restricting it? Im not worried about shot count. Mines in a .25
On that build I put a spacer inside the hammer to add spring tension. The hammer is longer than the other guns and you can only tighten up the rear adjuster a small amount before the gun won't cock. I also reshaped the poppet head in the valve to reduce surface area so it opens easier.
@@AnnihilatorAirguns I played with hammer tentions on other projects. Its a fine line with them not catching the hammer. I've also cut and shaped, valve stems. And modded the valves. So I have a bit of experience in the tinkering area 👍. This is my first pcp, and don't want to mess with it to much. I've converted guns and poured a lot of $$ into them, trying to get to that pcp level. Lol
Hi Troy ,
what is your opinion about semi auto airguns? People say using the part of the air reduces the accuracy. Do you thing so? Thank you.
Nice review man
troy did you see the super jumbo is out? 500cc and 250 bar. still looking for the manufacturer number for the :unique" fill adapter for my jumbo .22 which broke. please can you help
arthur sannella I'm not sure if I can help with the factory fill adapter. May be able to convert it to a standard foster fitting. Email me some pictures of where it's broken and we'll start there. I'm hoping the new rifles make it state side soon.
The Turkish can make nice air guns
A frend of mine has a Daystate 22cal and a Brocock Capatto 22cal , and I out shoot him on targets 75 to 85 yards all the time with my 300 dollar Gauntlet 22cal tuned and upgraded regulator , it pisses him off
YES!!!!
Could I have your phone #at your shop
I am looking at purchasing one of these and would like to speak to you Troy. I called and left you a message today 12/8/23.
800 not bad
If it was moderated and regulated
Damm she is sweet , I think you will give them a run for there money