UNREAL Mini Gaming PC Build - Xbox on Steroids
ฝัง
- เผยแพร่เมื่อ 27 เม.ย. 2024
- Use code DEVYNJ50 to get 50% OFF your first Factor box plus 20% off your next box at bit.ly/3UBE3c7
Check prices on Amazon:
CPU: geni.us/qA1erS
CPU Cooler: geni.us/YF0f0yx
GPU: geni.us/mY7y
Motherboard: geni.us/6pmf
SSD: geni.us/vRR4
RAM: geni.us/q24QPQB
Power Supply: geni.us/CK3v
Internal Extension Cable (20cm, P6A-P8Q): geni.us/jgmG0j
Toolkit: geni.us/07FfP
Electric Screwdriver:
Portable Monitor: geni.us/MMom9f
Micro HDMI Cable: geni.us/TSTq
Magnetic Camera Mount: geni.us/HDLJKgp
Other
-------
Case: velkase.com/products/velka-7
Riser Cable: velkase.com/products/290-mm-p...
Compatibility: velkase.com/pages/compatibility
📸 Instagram - / devyn.johnston
🎥 CAMERA GEAR:
Sony FX3: geni.us/9xnER
FX30: geni.us/MfrG86B
Sony 28-70mm Lens: amzn.to/3q4zxl6
Sony FE 20mm F1.8 G Lens: amzn.to/3kv5emq
Lighting kit: amzn.to/3bNYQCS
When you buy through an affiliate link, I may receive a commission on the sale at no additional cost to you. As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
For a second I thought I was watching Optimum.
Same type of vids,editing,and even builds 😭😭😭
Copy and paste all of Optimum’s videos. Annoying if you ask me. Even the laughs in between. Optimum made this video Friday.
@@coolalcoolal4165what the fuck are you talking about
@@coolalcoolal4165 Oh, I hope he actually did. 😂
Optimum set the standard for ITX videos.
I use the X47 cooler All CU on my FormD T1 and replaced the fan with a 92mm Noctua fan. It's quiet and super impressive. I have it set to 3 slot with my 4080 Super FE and it's a dream. Mini ITX has gotten so good the last few years.
That’s what I am planning to do . Currently have X53 cooler with default fan. Always wondered how much quieter pc gets with noctua fan.
@andriusmosta From my experience, they're a lot quieter that the stock
which CPU did you use and how are the temps ?
@@ghost-type thank you
@@ghost-type I did something similar, I found a 3D-printed mount compatible with the X47 and attached a A12x15 (120mm slim fan). The fan covers my CPU, RAM, and SSD heatsinks making my SSF build nice and cool :)
Monitor mount is fire!! Love that
I had bought the earlier revision of this case back in 2021. The building process was so finicky and tedious but I still managed to get it done. Great to see the latest revision has resolved so much problems from the earlier versions. Good job on the clean build. 👍
I love your videos and always look forward to seeing a new one whenever you feel like posting. I’m finally going to be able to build my dream pc next month and I’m going to build this build. Can’t wait.
Very cool build and id love to see you build another xbox styled pc
Awesome build sir 👌🏽
bro just build my dream setup😮💨☹
As alway Devyn great build.
I kinda like the orange fan in there it adds a splash of color to the build 🤔
Your content is amazing. I absolutely love the builds and I've learned a lot about building ITX. I'm planning a build with the 7800xt and 7600x. I hope it goes well!
color grading of whole video is mind blowing!!
Right..very clean💯
Your builds are diffidently top tier, your channel also top tier perhaps one of the best youtube channels top 2 for sure. I watch every builder in TH-cam just crazy about PC's and have saved for a year now for preparation have filled every cart in every pc sellers store and still searching for the perfect build, everytime I find the 1 I find yet another reason to keep looking omg! has to be sff.
beautiful!
I use the same Asus 17" monitor with a very similar monitor mount on my Velka 5 while I am traveling, works great.
great build👍👍
Finally bro the velka 7 !!! My next pc sure i built around velka 7 but i wait for RTX 5000 series and Minisforum BD 790
Devyn. Keep going brother. I absolutely love the builds. Your aesthetics. Your filming. Yeah sure it may be similar to other tubers. And no lie I watch some of them too. But when yours pop up. I’m always a viewer and supporter. Keep it up brother. Amazing work and GORGEOUS builds. Very pleasing to the eye to watch. Cheers bro 👊🏻❤️🔥
This is awesome!
I fit an ASUS Dual GeForce RTX 4070 SUPER OC Edition in my Velkase Velka 7 - there are two positions for mounting the GPU-side-panel. In the (outward) extended position, everything just fits!
This is so so cool.
The fury what now? Lol
This right here is my endgame case. I'm happy with my G200, but if time and money permits, I'm gonna further downsize to this one. Great video as usual, Devyn! Keep it up!
I have the velka 7 v2.1 and i paired it with an i7 10700k (specs that i already had) and an rtx4090 that i modded a bit so that it can fit. Apart from the severe bottleneck i am impressed with how well the temperatures hold up. Nice video!
Does Velka 7 comes with riser cable? Or need to buy separately?
@@jeremyg2236 if you buy the 7 version 2.1 then it should come with a riser cable. If you get the 3.0 (the latest) then you will have to buy it separately
@@jeremyg2236 the 2.1 comes with the riser cable included. In the 3.0 it is not included so you'll have to buy it separately. Honestly the 2.1 is the best offer in my opinion and not because of the free riser cable but for being the smallest velka 7 and highest build quality of them all in my opinion. The front plate is thicker and sturdier than in the 3.0 and the metal is not rough textured
This is very helpful. Would you recommend an internal HDMI extension?
you should build an AIO PC in that Ninja Airfryer
😂 Now that would be…IMPRESSIVE!
What OSD monitoring software are you using in this video?
What size if the front switch on the case panel (in case I want to swap it out with a lighted one)?
How safe are those super bendy PCIE riser cable?
SFF Gurus sings praises of the Theralright AXP90x47. Glad you finally picked one up! Noctua is great and all but I think they have been outclassed by the AXP
It’s on my list to pick up. Just rebuilt in the Ghost S1, and want something a little better than the stock fan.
Compared to the apelfohn black ridge (the latest model) what do you think is better?
@@xescdelarosa3328Black ridge and this are both GOAT material for their form factor. I don’t think there is conclusive proof of either one being more than marginally better than the other. The fact of the matter remains that you can’t beat physics and at some point you’ll only get better cooling with a larger heat sink and fan.
@@preytorben the only downside for black ridge, is that it's not compatible with AM5, at least as far as I know. I wonder if they will have updated version to be compatible with AM5.
The goat is back
I've been trying to re-build the prototype Steam Machine in the original case, and ultimately have failed. I don't want to modify any original parts and I'm at the end stage with the case cover having interference fit with the motherboard CPU power connector. Looking at your build here, I've used a LOT of the same components, so at least I'll be able to swap them into a nice, travel-sized case. Sad, but thankful for your advice on this. Great channel, and great builds - thank you.
Im thining of doing this buld in the near future, outside of thermap paste is there anytbing extra I'd need to purchase? Any specific cables or anything like that?
Need to do a build with the SGPC K66 air, matx/flex psu and 240mm gpu support. Zotac twin eagle 4070.super fits.
One thing I didn't see here was the final weight of the build? I know you included it for the velka 5 and 3 builds, curious how the 7 compares with the bigger power supply.
where can I buy this exact setup
How about plugging that usb c connection to the pc? if the monitor does support power delivery, it should be able to make the build only use one cable for both monitor and pc right?
What's the electric screwdriver used in this build?
Hi Devy, will you do a build in Densium APU with 8700g? since its APU you could use 250w passive psu from HDPlex
I want one of these cases with some front panel I/O. Give me two type C ports on the front and it's instabought. I'll figure out how to make it all fit.
Would a 4080 super fit?
What monitor are you using?
The case might as well have shipped flat packed
You should check out the Midori 5L v2 case
copper is a little colder until its satured it will cool down slower thus performinh worst than the aluminium version ...with an adapter you can slap a silverstone air slimmer 120 at 15mm they will fit and drop your temp by 5-10 degrees
How much did all the components cost you?
This build looks pretty sick
LOL If my dad were in this room with me while watching this video, I would get scourged midway through 🤣
And I don't even had headphones on
Dude i’ve been trying to find a monitor mount like that…. where would i even go to find something similar with vesa or at least those random amazon portables??? i’m rocking that matx asus prime case or whatever it is, so im not exactly sure where to even start with my existing portable monitor.
anybody know the light/monitor stand he use ? interested in it
he's done it again!
I really need a 10gbe option, any motherboard have it or mb with usable pcie slot (with 4080 gpu mounted work?)
Can you make a video or tips to how to clean your mini pc fast
I am really missing my ITX system. I think I need to find a case for my FE 4080Super that can be ITX and not die immediately due to overheating.
Best sff build ought to have sfx psus!
Sir, how small can u go? 😢
Anyone know if a 7900 xtx reference would fit without the side panel (would probably 3d print a riser)?
very early we will be seated
What kind of PSU cables are these?
My 4070 non super plays cyberpunk with dlss performance (1080p to 4k) and frame gen, RT psycho, at avg 85fps. This would be even better.
Idea: An ITX build with a case with triple slot GPU compatibility but only using a dual slot GPU like the 4070 super and using the third slot compatibility with a single slot 10 Gigabit NIC and connecting the NIC with M.2 to PCIe riser. Possible?
nice brother
I kinda wish we could see a benchmark comparison between the Xbox x and the pc
Can you make it water cooled
It's funny how backwards the PC market is. Considering the amount of limitations you have with a Mini-ITX system, the parts should be cheaper than their MicroATX or ATX/EATX equivalent.
Hi, could you tell me the brand and type of keyboard please? 10:17 many thanks in advance
Asus rog azoth
Thermalright isn't ugly at all. What you know about beauty huh
7:38 that's supposed to be eye of Sauron lol
nah its official its the freya butthole test XD
giving fast food a dif meaning
Optimum tech son but idc I enjoy these videos either way ❤🎉
How you get your cpu and cpu temp on screen like that?
That is the same question I’ve ask also..🤔
The PNY gpu shroud looks like an owl. Failed Noctua bid?
I wonder if that Msi 4070ti super (the small 2 fans one). Would fit in here.
Msi ventus 2x is just a tad more than 2 slots, say 2.2. This would fit the inno3d twin x2, 4070ti super. 250mm long only.
The maximum measurments for the gpu are 45x290mm, don't remember the width but it doesn't really matter. Coming from experience here
make it slightly fatter and taller to accomodate 320mm 3 slot gpu imo
Do you think I would need to underclock a 7800x3D if I wanted to do this kind of build?
I don't think he underclock his 7800x3d.....
Brother last two videos same ideas but this case really good not like deepcool one
How much do you want for this mini pc ??
do a midori
Copper cooler looks pretty cool!
Someone did a custom loop 280mm in this case
Specs :
CPU : Ryzen 7800X3D
ThermalRighy AXP90- X47
Board : Asus Rog B650E
NVME : Samsung 980Pro
Ram : Crucial 32GB DDR5 6000
GPU : NVIDIA 4070 Super
PSU : Cosair SF750
Case : Velka 7
Love the build. Smaller than Xbox. 4x the price ha
03:49 It's not ugly at all imo
Wow, so tiny but nice 👍
I have the b650E-I and i was wondering if anyone else has 40 seconds to a minute until it starts to display
Check your drive, if it’s not that return that shit
@@pokepokepoke64 Im new to pc building do you mean ssd by drive?
search memory context restore for amd boards
Damn, so we can still use air coolers instead of liquid coolers?
Yo...I'm sorry, but that cooler is dope as F looking lol
Quick question, why is RAM over 6000mhz a waste of money on a gaming build?
I had to rewind about the furry test, just to be sure I heard and saw it correctly lmao
The look on your face during that commercial about soggy food in a plastic plate is the saddest thing I've seen today. Sorry you had to do that, buddy. Nice videos by the way ❤.
😅
Yes, eat more veggie is good but put them on a dish instead of plastic
Bruh you did not call that full copper heatsink ugly as hell, smh
Optimum from walmart , but actually great video
the psu alone almost cost 1/2 of a series x lmao
No Ada Lovelace a4000?
When the case is almost half the price of an xbox tho 💀
It should also be of note that Xbox does lose money on every console sold.
Noooooo dont do this to me. i just built a formD T1 😭.
Unless you want to back pack it, then there is nothing to regret with your option
@@xescdelarosa3328 Thats kind of the issue, I travel to my cousins house quite often lol. I guess I have an AIO and can always use a larger bag.
@@misaroorasim well, i carry mine daily to class. If its is just something you do every once in a few days then i suppose it wilk be fine if you make sure everything is tight without sag and that the liquid cooler is not going to spill
@@xescdelarosa3328 Nice, out of curosity, what bag do you use?
@@misaroorasim a normal backpack. Simple enough to fit a 15.6 inch laptop, a few books and peripherals. Maybe between 15 and 20L
coil wine starter pack
👍👍👍💖😻
Cl36!? 🤮
Didn’t someone else just do this…