I think most folks don’t need such a small pc, but we’d like it to not take up so much space or make such a statement when you walk in the room like “I AM A PC GAMER”
speaking as someone who owns a 4.7 liter pc although with ryzen 5 5600x and rtx3060. please consider the temps and the hard labor of changing parts in it. I recently upgraded from a gtx 1070 to rtx 3060, i had to disassemble 60% of the pc just to reach the riser cabe in order to chance it out for a pcie 4.0 and then disassemble some more just to fit the graphics card.
@@anso3886 to be fair the tdp of the 40 series GPUs is lower for most skews as compared to the 30 series. The rtx 4070 has the same tdp as the rtx 3060ti. And there was a single fan version of the 3060ti, so actually, no, not all new GPUs are running hotter.
@@mateuszkask6286Yep, the newer generation is actually more efficient. It just so happens that NVIDIA and even AMD just push the hardware further to gain more performance that it runs hotter. My RTX 4070 Ti is already way better than 3080 Ti while consuming less power. The main issue really is the bad cost. Just overpriced for more than its worth.
@@anso3886 We're actually approaching the point where the "more powerful" GPU's are only liek 10% faster than the mide-range GPU's, so... The only way to go from here, is to shrink the tech, make it smaller... Who knows, maybe shrinking the tech will allow manufacturers to fuse graphics cards together like a sandwich so they can sell them as native-SLI single-unit cards, effectively doubling graphical performance. Basically, the only way to improve computer hardware from here, is to upgrade from 2 dimensional design, to 3-dimensional design... No more graphics cards, how about graphics cubes? xD
I have the velka 3. I have never hated doing repairs on any case more than this one. The engineering that went into it to make it small is indeed impressive, but you have to undo all of that to take it apart. To access any of the internals you have to completely disassemble the entire case... Other than that, it's fantastic. Super small and temps are great!
I see it as a replacement for a laptop, which most times is a nightmare to service. This one is still better for maintenance, no plastic clips and stuff.
You can't have it all... being compact and easy to work on... Like the user abov e said. Comparing it with some laptops that you need to snap plastic clips.... its heaven.
It's really amazing how miniaturization of pretty powerful desktop PC's has developed over the past few years. This build is a serious competitor to mini pc's like the Beelink GTR7 and SER7; only slightly bigger, but significantly more powerful. Great job on a very well-made video!
Unfortunately this is weaker than the same thing with a 3060Ti from 2 years ago and not that much faster than the same thing with a 2070 from 4 years ago. Maybe even slower than a 12GB 3060. And even with a 4060Ti, it would be almost the same as the 3060Ti Single fan 4070 where? (It's ~200W just like the 3060Ti/2070/1080 single fan GPUs)
@@yeshwantkethineni3694 The one thing you're overlooking is the efficiency of the 4060. I built this same pc with a 12600KF (undervolted and power limited) and the GPU is powerful enough without having overly obnoxious fan noise. Of course you could go with a 3060ti, but the difference is relatively small and the cost of the 4060 is roughly $100 cheaper than the 3060ti. If you're looking to drive a 1080p or even a 1440p monitor, this will be able to handle it without a sweat. Looking for high-refresh 4K gaming? You should probably be looking at something bigger with more thermal headroom.
i watched this video over and over again, even though i just purchased a HZXT v2 i have ordered the velka 3. im so impressed by this build, thank you! greetings from switzerland
Nah, this is the most beautiful build I've seen in a while. Been looking to build a mini mini pc like this but never really know where to get the case from. This video helps a lot.
absolutely stunning. I think many people including myself are intimidated by building our own pc, but this video breaks things down into such simple and digestible chunks that it seems pretty straightforward!
Wow! I was wondering if you could add in how much each build costs at the end of each video. That way, at least we'll have a rough estimate. I really enjoy these tiny build videos. Please do more!
holy crap i literally just bought this same cpu case and gpu, except i have the z790 and have 32 g rip jaw, along with a 520 firecuda, i got all of that including the noctua NH all on sale for half off, im so excited my velkase 3 comes tuesday, this video couldnt have came at the most perfect time!
This is so beautiful. I just did a new build last week, But very tempted to build this if I get a Black Friday deal. I have a portable 1080p monitor I can definitely hook this up with.
Absolutely impressive as usual, I think you just answered your previous video title's question! keep bringing these very cool and unique ideas for builds.
bruh your lighting is so prime. bravo. I'm sure a ton of work goes into making your shots look as good as they do. I hope a lot of people notice!! great vid as well :)
The Zotac 4060 Solo runs an aggressive stock fan profile. However, you can use MSI Afterburner to create a custom fan curve. I set mine to 30% up to 60C and at 50% to 80C. I overclocked the card by +150 core and +200 memory, and the card sits around 75C while in a Densium 4 case which is similar to the Velka 3.
Version 3 looks great! I bought version 2 but I had many personal problems with the build quality of the case. It gets scratched too easy and it's impossible to do proper maintainence on the case/components due to it's extremely poor assembly... I although it was a great introduction to the SFF-community, I feel like Velka 3 misses a lot of the user-friendly marks as I think cases should much prioritize when they're this small ❤
I love this build but don't feel confident enough to try it for myself as you zip through some parts of the build too quickly for me... even though I pause it a LOT! It's a really beautiful build and as usual a really slick video, congrats!
Okay, I just clicked on all the links and checked all the prices and did the math. If you wanted to get the whole thing shown on this video, it would cost you this much money. You're not gonna like it. It is, Drum roll please. 1366$ I am not even kidding. I clicked on every single link shown on this video, Added the total amount of money for the pc. And that's the final number that popped up of my calculator. Would you like to buy it???????
NO NO NO, 163mm is not pretty short. It's way above average. Jokes aside, what a fantastic build! I would love to have something this small! Thanks for sharing. BTW, suggestion to anyone carrying this with them in a carrying bag, please make sure to cover the case with something, as to not have anything fall into the system while it's in your bag and have issues.
I am so happy I supported this company back in 2019 when I got the 1st gen Velka 3 case. I still love the case, and seeing how more refined the current product is makes me supper happy. I completely fell in love with the case, and I never regreted switching from a big tower case to ITX !! Oh and that 600W PSU is also great, dead silent no matter what you do.
What a monster. I am building sth similar in a S300 now. But I am starting to question my choice of case. It does however have the benefit of allowing me to stick in a much larger GPU later (got the tiny Gigabyte 3-fan one for now). It does feel plenty small, and I've got a 750 watt SFX (way overkill but oh well).
@@yousefmahafzah9741 The temps are fine, but the case gets really hot without case fans, so I'd recommend the S400 instead, since you have more options.
I have a 3060 + 5600 build in the Velka 3 v2 and I love it. I tuned the fans to run silent at idle and although it's pretty loud while gaming, wearing headphones solves that problem. I'm not sure why but I love these little cases.
I have an Rx 6400 with just 1 vent and every build is "it can fit a 4090" but that's not so small lmao, so I was looking for something likr this and this case is amazing, thanks for sharing!
Oh, boy. 200 Euros+ for the case… I got a similarly sized case from Aliexpress for 31 USD… Paying over 200 Euros for a few pieces of aluminum is absolutely insane
Honestly HAD no need for a build like this. Looking to travel more and want something more exciting and powerful mainly being portable. With that being said just finished up this exact build! Thank You!!!
This is an awesome build man, I was looking for something like this for a while. Just one tip if I may (maybe because of the editing it looks like you didn't, but you prob did) - 4:11 - "4 provided screws..." you always want to adjust each screw in a cross like fashion. You screw one corner and go to the adjacent corner, never screw the ones that are right next to the screw you just adjusted. This helps the cooling plate of the fan sit evenly with your CPU.
Thank for the Videos, I just orderd from 2 separate videos of yours for my first build mainly because VELKA cases or parts wont ship to the US until January .
Being a child around 2007, this is how I envisioned the future of all computers. Unfortunately, I was wrong, but it's good that such possibilities exist. Perhaps someday I will build a similar computer like yours.
The backside m.2 slot is some really clever engineering. You say this is a great PC for travelling but honestly this looks like the kind of thing you'd sit next to your TV in the living room and use it in place of a console as a Steam Machine
Impressionnant .... au fur et à mesure, je pense justement revenir au 1080p , oublier les définitions au dessus et retourner à un milieu moins tourmenté . Merci pour cette vidéo, elle pousse définitivement à la réflexion 🙂
Watched this 2 weeks ago! And I can proudly say I’ve built this system with ryzen 5600x and I love it but the the zotac solo is only loud thing on the system. Anyone got advice for making the zotac 4060 quieter??
these things are small, sleek, powerfull. What more could u want, i have a full size gaming pc but these little things are cool a shit, great job dude. fr.
Absolutely beautiful and elegant, this assembly is perfect and very energy saving friendly. To save money, it would be to use 12400 and ddr4, but as you say, it makes it a very powerful and smoollll. love it
Very cool build. It’s nice that it fits a dual slot GPU. I’ve done a 3.8 Liter Build with the „old“ case from Goodysory. But there’s only a OneSlot GPU (6400) possible to fit in - above the CPU… Also the Fan was too noisy, so I mounted a 80mm BeQuiet on a sidepanel , removed the stock GPU fan and connected the 80mm fan directly to the GPU motherboard. But you build it’s just cleaner and the smallest ever! 🎉
wow this is great, I wish I could send this back in time to myself - used to travel a lot for work, staying in hotels five nights a week. Pack in a hdmi-to-anything adapter for the hotel televisions and this would have been the greatest of times instead of the most boring ones, damn! :D
idk why I enjoy this so much. I like big powerful PC's, always have. Been rockin the cosmos 2 SE case for like a decade now lol. Still I really like how small and aesthetic these things are, and with how small my room is I should probably be building something like this tbh and putting it on a shelf behind my monitor or something lol.
these compact pc's are so amazing and addictive to watch. I've been going through them all day and figuredf I need a new case. spent 200$ for small ugprades + new cooler master qube for my b450f ryzen7 5800x. as always bismillah
This is a good case. Here is why: A design flaw with these compact cases often is the 110/230 volt cable within the case. Not only is it dangerous that, in the worst case, 230 volts can reach the PC hardware. No, it can also cause severe disruptions, among other things. Because these cables often emit radio waves. Since I got the node 202, I know that I will never want that type of case again. However, there are also compact cases where the 230 volt cable ends at the edge of the case with either SFX or even smaller power supplies.... Guys, I recommend that you don't buy a case where the 110/230 volt cable goes through the case !
Built almost the same system (i5-13500T 13gen) a few months ago but created new sides from mesh and plexiglass frames for better cooling. I also added a QLED 1024:600 7" touch panel to the front, snaking the HDMI/USB through the case, along with 2, 1.5" full-range speakers. I also added 2, 40mm 3-wire fans to cool NVMEs and memory since it still gets quite warm in this case due to the way air is drawn down and out. 1 of my better builds at an even better bang for the buck. Hope we see a half-card 4060 16GB this year, even though the 8GB runs everything 2023, pretty well at 1080P.
Hi all. Just built this and the side panel rests right at the GPU fan. Manage to stuff some plastic in between the side panel to give it just a little space so the fan can spin.
My wife wanted a compact PC so it could sit on the shelf under the TV in our living room when she games down there. She normally uses her laptop but we don't think it will be strong enough to handle MH Wilds, plus it would be a bit more easily upgradable than the laptop. This seems perfect.
See, the thing is, I don't need this compact of a PC. But I want it.
I think most folks don’t need such a small pc, but we’d like it to not take up so much space or make such a statement when you walk in the room like “I AM A PC GAMER”
@@DengueBurger True, that's why I went with a 27 liter case but it's still pretty big so I'm actually seriously considering this option
Same
I went from a mid tower to a compact matx tower which is half the size and it's the most satisfying pc I've built in my life
speaking as someone who owns a 4.7 liter pc although with ryzen 5 5600x and rtx3060. please consider the temps and the hard labor of changing parts in it. I recently upgraded from a gtx 1070 to rtx 3060, i had to disassemble 60% of the pc just to reach the riser cabe in order to chance it out for a pcie 4.0 and then disassemble some more just to fit the graphics card.
I like how mid-range GPUs are getting more mini size options. Make GPUs smol again!
more powerful gpus runs alot hotter so I highly doubt that gpus will be come smol again
@@anso3886 to be fair the tdp of the 40 series GPUs is lower for most skews as compared to the 30 series. The rtx 4070 has the same tdp as the rtx 3060ti. And there was a single fan version of the 3060ti, so actually, no, not all new GPUs are running hotter.
@@mateuszkask6286Yep, the newer generation is actually more efficient. It just so happens that NVIDIA and even AMD just push the hardware further to gain more performance that it runs hotter.
My RTX 4070 Ti is already way better than 3080 Ti while consuming less power. The main issue really is the bad cost. Just overpriced for more than its worth.
It’s cause the 4060 has the specs of a 50 class gpu. This isn’t a good thing.
@@anso3886 We're actually approaching the point where the "more powerful" GPU's are only liek 10% faster than the mide-range GPU's, so... The only way to go from here, is to shrink the tech, make it smaller...
Who knows, maybe shrinking the tech will allow manufacturers to fuse graphics cards together like a sandwich so they can sell them as native-SLI single-unit cards, effectively doubling graphical performance.
Basically, the only way to improve computer hardware from here, is to upgrade from 2 dimensional design, to 3-dimensional design... No more graphics cards, how about graphics cubes? xD
Just in case anyone gets mixed up at 3:04 , L9i is the one you use if you want to go Intel, and L9a is the one you use for AMD :)
L9a is a little bit heavier so I'd get that and then order socket 1700 mounts
@@Capital_KP heavier means better cooling?
@@Gabriellho a little yes, others here on YT have tested. Not much but in these builds everything counts
Tbh good luck with cooling Intel's 13th or 14th gen chips in a case this small lol.
@@PorterBsure you can, just need the right expectations and maybe som undervolting.
This seems like the perfect travel buddy PC.
Now slap a monitor the size of the case panel on it
@@lemon9.9 let me get the super glue
Travel buddy? I would run it every day😂
@@lemon9.922" 100hz aplenty for $50 these days
@@lemon9.9 Arzopa for the win
I have the velka 3. I have never hated doing repairs on any case more than this one. The engineering that went into it to make it small is indeed impressive, but you have to undo all of that to take it apart. To access any of the internals you have to completely disassemble the entire case...
Other than that, it's fantastic. Super small and temps are great!
I see it as a replacement for a laptop, which most times is a nightmare to service. This one is still better for maintenance, no plastic clips and stuff.
You can't have it all... being compact and easy to work on... Like the user abov
e said. Comparing it with some laptops that you need to snap plastic clips.... its heaven.
That same mentality, take that and apply it to a 2.9L Audi twin-turbo V8. It's insanely small and insanely intricate.
@@crazyidiot5309yup. Same here with my penis. It’s insanely small but also pretty intricate and powerful for what it is.
It's really amazing how miniaturization of pretty powerful desktop PC's has developed over the past few years. This build is a serious competitor to mini pc's like the Beelink GTR7 and SER7; only slightly bigger, but significantly more powerful.
Great job on a very well-made video!
We really are collopsing into all PC's into some kind of middleground. The footprint of this PC might even be SMALLER than a beelink
Unfortunately this is weaker than the same thing with a 3060Ti from 2 years ago and not that much faster than the same thing with a 2070 from 4 years ago. Maybe even slower than a 12GB 3060.
And even with a 4060Ti, it would be almost the same as the 3060Ti
Single fan 4070 where? (It's ~200W just like the 3060Ti/2070/1080 single fan GPUs)
@@yeshwantkethineni3694 The one thing you're overlooking is the efficiency of the 4060. I built this same pc with a 12600KF (undervolted and power limited) and the GPU is powerful enough without having overly obnoxious fan noise. Of course you could go with a 3060ti, but the difference is relatively small and the cost of the 4060 is roughly $100 cheaper than the 3060ti. If you're looking to drive a 1080p or even a 1440p monitor, this will be able to handle it without a sweat. Looking for high-refresh 4K gaming? You should probably be looking at something bigger with more thermal headroom.
wow, what a fit!! Superb work as usual!
the size and the power it can deliver in that package is crazy 🤯 what a great build
i watched this video over and over again, even though i just purchased a HZXT v2 i have ordered the velka 3. im so impressed by this build, thank you! greetings from switzerland
Hey, when did you order it and how long did it take until you got it delivered?
Love the content! Just wanted to say that Jaquiain A07 Mini ITX Computer Case Chassis HTPC Case is very similar to this and it’s half the cost !
Good to know!😊
Thats why I pay for internet. Thkyou my brother 😁
As I finished watching the "Smallest 4060 LP build yet?" vid, this pops up. It only took 11 days for it to get even smaller.
Nah, this is the most beautiful build I've seen in a while.
Been looking to build a mini mini pc like this but never really know where to get the case from.
This video helps a lot.
I always wanted to do a build in a Velka 3 and yours looks great. I think you made some good choices on components and temps look extremely good.
absolutely stunning. I think many people including myself are intimidated by building our own pc, but this video breaks things down into such simple and digestible chunks that it seems pretty straightforward!
just build it bro, it's not hard, there are very good resources out there compared to when i started.
I built a 4090 pc and I love it. Seeing this build makes me want it too 😭 your build was incredible and great video as well!
That cable management is more organized than my future...
Those small builds are super cool and would make for a great clean minimal look on a gaming setup.
Wow! I was wondering if you could add in how much each build costs at the end of each video. That way, at least we'll have a rough estimate. I really enjoy these tiny build videos. Please do more!
around 1400 total not including shipping and taxes
holy crap i literally just bought this same cpu case and gpu, except i have the z790 and have 32 g rip jaw, along with a 520 firecuda, i got all of that including the noctua NH all on sale for half off, im so excited my velkase 3 comes tuesday, this video couldnt have came at the most perfect time!
Just finished putting this exact build together this morning! I LOVE IT
Nice!!
@jasean1 are you plugging display cable / hdmi into the motherboard or gpu?
@jasean1 plug it into the motherboard first, install the drivers for the gpu, then switch the cable over to the gpu
How much it cost total?
@@DerniereWilt Slightly below $1400
This is so beautiful. I just did a new build last week, But very tempted to build this if I get a Black Friday deal. I have a portable 1080p monitor I can definitely hook this up with.
Absolutely impressive as usual, I think you just answered your previous video title's question! keep bringing these very cool and unique ideas for builds.
I use the same strix motherboard and really like how this has both lga 1200 and 1700 mounting holes allowing you to install older coolers
bruh your lighting is so prime. bravo. I'm sure a ton of work goes into making your shots look as good as they do. I hope a lot of people notice!! great vid as well :)
Excellent video. Love how you explain each component and provide tips throughout.
Just bought this setup
The Zotac 4060 Solo runs an aggressive stock fan profile. However, you can use MSI Afterburner to create a custom fan curve. I set mine to 30% up to 60C and at 50% to 80C. I overclocked the card by +150 core and +200 memory, and the card sits around 75C while in a Densium 4 case which is similar to the Velka 3.
Я майнил много лет эти карты способны беспрерывно в течении годов работать. Лучьше всего Асус и Сапфир.
This guy is so underrated! Amazing build! (Subscribed) 👍
so is no one going to mention the price
About 1.2k from what I found.
I want to express a sincere “thank you” for this video, giving me the confidence to build my first pc
great video, awesome editing...I've been subbed to you for a while and just remembered how nice your builds are. Love it!
this is just WOW size... so much power in so compact form factor.. even those mini pc boxes will shy away from this pc built
PC is so small that smoke comes out due to heat 00:03
Bro what r u talking about 💀
Im going to steal this build exactly. This is what ive wanted to build for my first PC im switching from Mac after 20 years and cant wait.
Version 3 looks great! I bought version 2 but I had many personal problems with the build quality of the case. It gets scratched too easy and it's impossible to do proper maintainence on the case/components due to it's extremely poor assembly... I although it was a great introduction to the SFF-community, I feel like Velka 3 misses a lot of the user-friendly marks as I think cases should much prioritize when they're this small ❤
I love this build but don't feel confident enough to try it for myself as you zip through some parts of the build too quickly for me... even though I pause it a LOT! It's a really beautiful build and as usual a really slick video, congrats!
Okay, I just clicked on all the links and checked all the prices and did the math.
If you wanted to get the whole thing shown on this video, it would cost you this much money.
You're not gonna like it.
It is, Drum roll please.
1366$
I am not even kidding. I clicked on every single link shown on this video, Added the total amount of money for the pc.
And that's the final number that popped up of my calculator.
Would you like to buy it???????
Not surprise, prices high as f right now.
Also how long it will be work? 1 year ? I would be buy lower videocard.
Just completed almost the same build in it - surprised from the quality, that's a very good ITX case I would grade higher than a Ghost 1
NO NO NO, 163mm is not pretty short. It's way above average.
Jokes aside, what a fantastic build! I would love to have something this small!
Thanks for sharing.
BTW, suggestion to anyone carrying this with them in a carrying bag, please make sure to cover the case with something, as to not have anything fall into the system while it's in your bag and have issues.
I am so happy I supported this company back in 2019 when I got the 1st gen Velka 3 case. I still love the case, and seeing how more refined the current product is makes me supper happy.
I completely fell in love with the case, and I never regreted switching from a big tower case to ITX !!
Oh and that 600W PSU is also great, dead silent no matter what you do.
What a monster.
I am building sth similar in a S300 now. But I am starting to question my choice of case. It does however have the benefit of allowing me to stick in a much larger GPU later (got the tiny Gigabyte 3-fan one for now).
It does feel plenty small, and I've got a 750 watt SFX (way overkill but oh well).
What about the temps in s300 is it good or what?
@@yousefmahafzah9741 The temps are fine, but the case gets really hot without case fans, so I'd recommend the S400 instead, since you have more options.
I have a 3060 + 5600 build in the Velka 3 v2 and I love it. I tuned the fans to run silent at idle and although it's pretty loud while gaming, wearing headphones solves that problem. I'm not sure why but I love these little cases.
Yeah I like bigger cases just so they aren't so loud, as an open-headphones user
Why did Ali change his accent and color grading?
Dude i been trying to find youtuber that does mini builds forever finally found a guy love your worj
SFF for the win
I have an Rx 6400 with just 1 vent and every build is "it can fit a 4090" but that's not so small lmao, so I was looking for something likr this and this case is amazing, thanks for sharing!
Oh, boy. 200 Euros+ for the case… I got a similarly sized case from Aliexpress for 31 USD… Paying over 200 Euros for a few pieces of aluminum is absolutely insane
Which case from Aliex?
Yeah which case
Stamped metal and machined metal are not in the same finishing category ... Hi there.
lul yeah, prob have spent 10k+ for a laptop that also doesnt work properly
Honestly HAD no need for a build like this. Looking to travel more and want something more exciting and powerful mainly being portable. With that being said just finished up this exact build! Thank You!!!
This is an awesome build man, I was looking for something like this for a while.
Just one tip if I may (maybe because of the editing it looks like you didn't, but you prob did) -
4:11 - "4 provided screws..." you always want to adjust each screw in a cross like fashion. You screw one corner and go to the adjacent corner, never screw the ones that are right next to the screw you just adjusted. This helps the cooling plate of the fan sit evenly with your CPU.
Thank you. I wanted too build a new compact gaming computer, I saw this and built one. Like this . Works great. Many thanks.
Thank for the Videos, I just orderd from 2 separate videos of yours for my first build mainly because VELKA cases or parts wont ship to the US until January .
Being a child around 2007, this is how I envisioned the future of all computers. Unfortunately, I was wrong, but it's good that such possibilities exist. Perhaps someday I will build a similar computer like yours.
Imagine bringing this along to a Lan party for some CS back in the day. Love it.
The iPad setup was a game changer 🤯 such a compact setup when utilized like that
You are way too underrated my man!
Great work making the l9i fins vertical.
You can remove the heatsink from the m.2 for better airflow. The SSD doesn't need it
Very clean build! But as of recent, Optimum tech has made the smallest pc at 3.6L. It does surprise me how well these sub 6L preform in gaming.
Great quality video as always devyn but it felt a bit fast than your previous videos, im more used to you slow paced videos for better understanding !
The backside m.2 slot is some really clever engineering.
You say this is a great PC for travelling but honestly this looks like the kind of thing you'd sit next to your TV in the living room and use it in place of a console as a Steam Machine
What a fantastic little fella of a build.
That is just simply amazing, great gob thanks for sharing.
Impressionnant .... au fur et à mesure, je pense justement revenir au 1080p , oublier les définitions au dessus et retourner à un milieu moins tourmenté .
Merci pour cette vidéo, elle pousse définitivement à la réflexion
🙂
I’ve discovered a whole new world of tiny builds. I love it!
Watched this 2 weeks ago! And I can proudly say I’ve built this system with ryzen 5600x and I love it but the the zotac solo is only loud thing on the system. Anyone got advice for making the zotac 4060 quieter??
zotac firestorm software
How much did your cost come out to? I’m itching to build a travel PC…but I just build my home desktop and it wasn’t cheap 😂
these things are small, sleek, powerfull. What more could u want, i have a full size gaming pc but these little things are cool a shit, great job dude. fr.
this would be a killer build to compliment a portable vr setup with a quest 3, awesome stuff
Absolutely beautiful and elegant, this assembly is perfect and very energy saving friendly. To save money, it would be to use 12400 and ddr4, but as you say, it makes it a very powerful and smoollll. love it
Very cool build. It’s nice that it fits a dual slot GPU. I’ve done a 3.8 Liter Build with the „old“ case from Goodysory. But there’s only a OneSlot GPU (6400) possible to fit in - above the CPU…
Also the Fan was too noisy, so I mounted a 80mm BeQuiet on a sidepanel , removed the stock GPU fan and connected the 80mm fan directly to the GPU motherboard.
But you build it’s just cleaner and the smallest ever! 🎉
感谢分享，正有组装itx的打算，我感觉我能复刻这套搭配
My kind of built.... Small & yet packing... I loved it! A job well done! 🍻🍻🍻
it ain’t the size of the boat, but the motion of the ocean 😉
@@DgkYogi You've totally lost me with your Zen quote... XD Hahahaha, But I feel ya somehow... 🍻
Out of the park..Great itx build. Well lets see your skills in the coming months :)
Excellent. Thanks for a really good instructional vid. Appreciate your efforts.
Good job,Sir.
I recently helped upgrade my roommates K39, also around 3.9L, from Ryzen 3600 + 2070 --> 5600x + 4060 (zotac single fan). Solid little gaming PC.
wow this is great, I wish I could send this back in time to myself - used to travel a lot for work, staying in hotels five nights a week. Pack in a hdmi-to-anything adapter for the hotel televisions and this would have been the greatest of times instead of the most boring ones, damn! :D
Yes. Now this is the thing ❤
Damnnn. Just found out about you channel, and I'm gonna say this as early as now. You will be big brooo!
idk why I enjoy this so much. I like big powerful PC's, always have. Been rockin the cosmos 2 SE case for like a decade now lol. Still I really like how small and aesthetic these things are, and with how small my room is I should probably be building something like this tbh and putting it on a shelf behind my monitor or something lol.
Sounds like my lane, I move around ALOT and this would pair perfectly with my current setup and a portable monitor
Love this so much. Need something small to wall mount this looks perfect and looks fun to build
Which FPS overlay did you use? It's so clean. Great video and build btw 👍
these compact pc's are so amazing and addictive to watch. I've been going through them all day and figuredf I need a new case. spent 200$ for small ugprades + new cooler master qube for my b450f ryzen7 5800x. as always bismillah
This is a good case. Here is why: A design flaw with these compact cases often is the 110/230 volt cable within the case. Not only is it dangerous that, in the worst case, 230 volts can reach the PC hardware. No, it can also cause severe disruptions, among other things. Because these cables often emit radio waves. Since I got the node 202, I know that I will never want that type of case again. However, there are also compact cases where the 230 volt cable ends at the edge of the case with either SFX or even smaller power supplies.... Guys, I recommend that you don't buy a case where the 110/230 volt cable goes through the case !
You have earned a new subscriber!! Kudos!
keep the sff build coming 🔥
Your aesthetic reminds me of optimum tech. Its a good aesthetic, you earned a sub from me
In one word this is awsome
Low key want to build it this looks amazing
Dude, this is a work of art
That is a perfect solution. I greatly appreciated for this project. 👍
Built almost the same system (i5-13500T 13gen) a few months ago but created new sides from mesh and plexiglass frames for better cooling. I also added a QLED 1024:600 7" touch panel to the front, snaking the HDMI/USB through the case, along with 2, 1.5" full-range speakers. I also added 2, 40mm 3-wire fans to cool NVMEs and memory since it still gets quite warm in this case due to the way air is drawn down and out. 1 of my better builds at an even better bang for the buck. Hope we see a half-card 4060 16GB this year, even though the 8GB runs everything 2023, pretty well at 1080P.
got a video or pics mate
We need a bit bigger than this, personal preference for the airflow and a long hardcore game is what i’m thinking. Please build one!
Wonderful. PLEASE make more videos like this
Hi all. Just built this and the side panel rests right at the GPU fan. Manage to stuff some plastic in between the side panel to give it just a little space so the fan can spin.
Wow! This is possibly the closest build to what I’ve been looking for. Just I’d love it to be all-AMD to also install SteamOS
Sweet build man !!
Very nice build! thanks for sharing.
My wife wanted a compact PC so it could sit on the shelf under the TV in our living room when she games down there. She normally uses her laptop but we don't think it will be strong enough to handle MH Wilds, plus it would be a bit more easily upgradable than the laptop. This seems perfect.
Love this channel. Quality build!
Beautiful build. Curious to why didn't you pick 13600K instead? Also really envious of that Razer Viper Mini. 😏
I would like to know this too!!!
13600 gets hotter