ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2021
- In this video, I am getting my second DF64 ready for the filter coffee taste test.
In the yellow DF64, I am removing the titanium coated burr to the 64mm red speed coated SSP multipurpose burr set.
I clean up the grinder and discuss about what you should do before using the grinder the first time.
I also did a quick alignment test and in 2 attempts I am able to get the ssp burr 100% aligned.
I would like to thank Evan for supporting me on Patreon as well as Eduardo for donating on my PayPal.
I am hoping more will support me in Patreon or through donation on my PayPal. Details will be right below! Thank you in advance!
You can help me by supporting me on Patreon:
/ speedy3dcreations
Or you can make donation to my PayPal at:
www.paypal.me/speedy3dcreations
Alternatively, you can also purchase my 10° Tilted base or my other mods on my website:
www.speedy3dcreations.com/acc...
Thank you in advance!
If you are in Malaysia, you can purchase the 3d print of my 10° tilt base, anti Popcorn Mod, grind indicator ring as well as the version 2 of the declumper with Ben.
shopee.com.my/product/1846440...
![[안방1열 풀캠4K] 베이비몬스터 'FOREVER' (BABYMONSTER FullCam)│@SBS Inkigayo 240707](http://i.ytimg.com/vi/_2HL-ogzzBU/mqdefault.jpg)
![[TH] VCT Pacific Stage 2 - Week 4 Day 3 // GEN vs TS | PRX vs ZETA](http://i.ytimg.com/vi/nspkjQuZve0/mqdefault.jpg)
Thanks for all the wonderful DF64 videos, CY.
Thanks for the video. I followed your exact steps and I got perfect alignment after the clockwise turn as well!
this is awesome!
Just installed mine ! What an upgrade over the stock burr !
what is the difference between the stock burr and the dlc ... i cant afford the ssp ... so those are my only 2 options thanks
Rewatching this for when they are back in stock :)
So helpful. Thank you so much
Welcome and thank you 😊
Great video CY
Thanks Dane!
Awesome explanation as always, Bro!!!
Thanks bro!
@@CaffeMartellaSingapore where do you recommend finding a 3D printer to print the customized items?
@@jritchie70 a reasonably good 3d printer like the creality ender 3 v2 only cost less than 350 usd now. Can consider getting it to start a new hobby on top of coffee!
How's this burr upgrade for filter coffee compare to hand grinder like comandante c40 /kinu?
great video thanks,
at the end you mention the 10’ titled base helps with the alignment proses.
How exactly? I would not expect that to influence burr alignment.
Is it just easier to work on at that angle?
thanks again.
I can only relate in my own user experience but I cannot provide any scientific explanation on how the 10 degree stands makes burr alignment easier.
One confirmed advantage is that the coffee ground now exit the chute better and grinding chamber is much cleaner. Of course, this can also be due to the fact that I have modded the declumper as well,
Hello! Thank you for the video, for purely filter coffee grinding, would you advise going with the SSP- filter burrs, or with the multi purpose ones?
I will go for SSP brew burrs
Regarding burrs, are all same diameter burrs compatible with any grinder ?
Reason I ask is because I have a 75mm quamar q13E, and thinking about upgrading burrs
It's not. They are not all compatible with one another.
Hey there! Thanks for the shout-out! Have you done any alignments with the SSP high uniformity espresso burrs yet? Curious if it would be any different than the unimodal.
Yes I have done it and I will first be comparing the filter coffee then move on to espresso
really thank you for the support. This morning I make a filtered coffee with the ssp multipurpose and its simply amazing...the clarity and sweetness I am getting..
so that's all you have to do to check for alignment? you just have to check which of the 3 possible positions that you need to be attaching the top and bottom back together? will it always be a 100% match or will it just be the "best results of the marker test" is the alignment you end up going with?
it's the best position of the the 3 which may not be 100% aligned. but if u ate able to get close to 90% its pretty good.
@@CaffeMartellaSingapore is it possible to use aluminum foil "shims" to achieve the same results? I've seen other videos where the technician uses it to make it aligned.
Need your professional opinion at the moment I have the Titanium burr and I think I will use it for a while because it's brand new. One more question I have two options for water that I can use for my Espresso One is mineral water with calcium 20ppm and TDS 90-105mg/I been told mineral helps for better-tasting espresso ?. The second option is reverse osmosis water without minerals. Guess without minerals taste will be less but less build-up (mineral /calcium in the boilers? What would be the best option?
i dont recommend using minerals in boiler type espresso machines unless you are using the minerals that doesn't contain any calcium at all. TDS usually is fairly low in singapore. I wont advice using reverse osmosis water though. i like water that has potassium, magnesium
Difference between ssp burr and normal burr??
Thank you!!
people think the ssp burrs taste different and better. supposedly the ssp burrs are sharper and help grind the coffee faster. ssp is a company from south korea and people are really excited about them.
With the SSP burr change the new zero mark is no longer at the 6 o'clock position (bean icon). This indicates that that SSP burrs must be thicker than the original burrs. If you order the DF64 with SSP burrs does that mean that the collar numbers will better line up with zero at the 6 o'clock bean icon position? ...or will the SSP burr even from factory always mean that the zero mark is now at the 3 o'clock position regardless?
I was wondering the same thing. I think that’s why CY has that plastic collar that he can move around to point at the new zero point. Perhaps one easy solution is to print a new circular label to stick over the original? Preferably something that won’t be impossible to peel off once you decide to return to the stock burrs. I’m sure CY could easily make that, and hopefully with a nicer font too. Cheers!
My Meade telescope RA circle is movable as it is housed like a bearing. Its very stiff so it doesn’t move accidentally. Could be a mod or upgrade in the future for this grinder.
I've been leant an Atom 65 (currently using a J-max) by a friend and thought it would be great to check the alignment of the burrs to make sure all is running well before I begin. His was used in his coffee shop but burrs seem in good shape. Performing the marker test everything seems even all around, but the flats aren't completely cleaned of marker. The inner point remains and only the outer edge is rubbed away. On both top and bottom burrs. So I'm not really sure if that's normal or where to go from here haha. Any advice from anyone?
I believe its well aligned.
What do you mean by full wipe? I don’t understand . Thanks
Where the wet marker is totally wipe off.
Where did you get the silicone tubes and what are the specs? Diameter etc
the silicon tube comes with the grinder. You just have to set it right.
@@CaffeMartellaSingapore oh great, thanks. I’m still waiting for mine to arrive, will be printing all your mods :) nice to know I don’t have to get new tubes for the springs
@@WTFBOOM25 it comes with the grinder. Just that it is always not placed at the right position and this will be the reason why some will experience very small range for espresso.
When doing the marker test, should I go to the finest setting and go coarser bit by bit until I can rotate the burrs by hand, or go finer bit by bit until the burrs start to touch?
first start at burr lock. then slowly rotate by hand until it is free to spin with burrs touching.
@@CaffeMartellaSingapore thanks. Mine was 90% wiped off, but I'm afraid I might've spun too much (about 4 revolutions) ?
@dan138zig its all right. the number of revolution you spin wont affect the % wipe.
@@CaffeMartellaSingapore thanks a lot!
@@dan138zig always welcome
does it damage the burrs when youre spinning at the 0 mark and you hear the burrs touching?
the outer rim of the ssp HU dont really grind any beans at all. Hence it wont do damage by just rubbing the burrs.
@@CaffeMartellaSingapore would the same principle apply for the SSP MP burrs?
@justmemikey Should be similar
Not sure why three colors are used on the top burr....just mark one and it's respective hole. Kinda impossible to mess up....
Its just personal preference. 😂
Do you have the links to the 3D print files for the base, collar ring and anti popcorn if I want to print them for my own personal use?
Also does the collar ring number hole still align with the numbers on the new DF64 collar?
You can go on to thinginverse and search for "Godspeeeeed" 5 e. That's my thingiverse ID.
@@CaffeMartellaSingapore perfect 👌. Thank you so much!
Wonder how u clean the marker
Just grind some old beans
Sorry I’m strictly Milan Italy Grinders made in Italia.
Why sorry. Everyone has the right to decide which grinder they want to buy and use.
So why do you comment under a g-iota video?
He is curious why these Chinese grinders grind much better than some of the Italian made grinders.
Hi , thank you for your Chanel! But please remove your alignment videos, they are far below your level. Your alignment does not consider the lower burr. With your method the upper burr now is OK aligned but the lower one still could be total off. For a complete alignment you need to shim the bottom burr (too).
Best regards and thx for your videos.
thanks for the feedback. The bottom burr we aligned with a calipers but choose not to show on video because not everyone have that and usually from my aligning with so many df64, bottom rotary burrs carrier are usually quite good. Thanks for the feedback anyway.
@@CaffeMartellaSingapore ok this is nice to hear! A Remark, for the bottom burr watermarker method with shims (al foil) works fine. Thx for your videos!!! Btw what do you think about ssp cast for filter?
@@SarntAKluss I like it alot with more body and texture and sweetness.
@@CaffeMartellaSingapore thank you for your valuable time!