DF83 burrs alignment test out of the box.
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- DF83 unboxing:
• DF83 is here! | Unboxi...
You can check it yourself. Here are my affiliate links- you pay normal price and I earn commission from Amazon.
Red acrylic pen:
amzn.to/3SaRyMh
Comandante C40
amzn.to/3P4Gfok
Kinu Phoenix
amzn.to/3y9mXqN
J-Max
amzn.to/3aR8Iyz
K Max
amzn.to/3rxnos8
Espresso cups
amzn.to/39IAey1
WDT needles
amzn.to/3rqPi9o
Normcore palm tamper
amzn.to/3Mfza2s
Normcore tamper
amzn.to/3OsqOpU
Normcore leveler
amzn.to/3jYhtZa
The alignment looks very very good. No need to shim it. If you look closer you will notice that around 2 out of 3 screws more marker is left then anywhere else. In my experience it means that those two screws are tiny bit overthightend and usually all that needs to be done is to unscrew them by the tiniest moves possible like 1/12 of one full rotation. If that changes nothing give them another 1/12 of loosening rotation. Eventually it should it make it perfect :)
Thank you very much. Looks like I was lucky with mine, some people complained about their alignment.
I would leave it for a few months to let them bed in, it looks pretty good to me, only you will tell in your cup as time goes on.👍😎🇬🇧
Thx. The coffee so far tastes great, definitely different than on DF64 and Niche.
Looks very good out the box to me!
Yeah, not bad at all
@@mycoffeeshow111 have you tried the Lab Sweet Cast burrs in your DF83?
@@jackowens_ only HU and wasn’t convinced that they are that much better. I would love to try Cast and also MP but can’t afford everything.
I don't own an electric grinder but, as a person with with some OCD (lol), the hassle seems unnecessary at the moment, the alignment looks good enough... you can always check again in the future and do it at a later stage if the performance is not on par with your expectations :)
Thank you. I would do everything to avoid DIY so I graciously accept your advice 😛
I'd leave it Jack. Quite frankly that looks pretty good.
Thank you.
Most people use dry erase markers, I wonder if Acrylic is better or worse, health wise, but hopefully no residue or particles remain.
If I think about all the things I inhaled/digested in my life, I don’t think acrylic marker will make any difference 😛
Hi Jacky, to my eyes they look good enough. For the comparison, it would be pretty neat if you could use the SSP Cast burrs.
Cheers ☕️
Thank you. At the moment I have either Itamill or SSP MP for DF64 and standard burrs for DF83. I plan to do a lot of videos so we will test everything. What would be your vote for the first video: standard vs standard or ssp mp vs standard?
@@mycoffeeshow111 standard vs standard. Thank you Jack
@@JoseGabelaCuesta thank you
I don't understand how you could even get the top dial / burr holder part off without taking off the dial indicator first. I had a 3d printed dial indicator on that was so tight and on the DF64 and couldn't get into the burr chamber because I couldn't get the damn thing off without risking scratching it up!
Well, I am one of the kind 😛. Still, you live and learn.
It will come off as one whole unit, so collar, top burr carrier, and dial indicator will all stay together. You can do it that way if you wanted to, no harm is done. Also when installing the dial indicator don't set it flush to the collar, leave a small space. I use 2 small shims and set the indicator with a little space between the two so it's not rubbing on the collar.
Correction, this will not work with a dial indicator that screws onto grinder, I have only done this on a DF64 with a tight fitting dial indicator (no screws). Please take that into consideration and don't damage your grinder
@@brianharman82 thank you for your advice!
@@brianharman82 I guess the DF64 and DF83 a bit different in that regard. Pretty sure you can't take off the whole top part on the DF64 without removing the dial indicator first, right? I haven't tried opening the DF83 at all yet. If it's not broken why mess with it, (well until I get SSP burrs to put in maybe!).
@@BensCoffeeRants You're right, I don't have my 83 yet it's on pre order. I watched a ton of videos before my purchase and I swore I saw someone do it on the 83 but it was the 64. Please don't try this, it's not possible with a dial indicator that has a screw unless your indicator is way high (it's not). I apologize for this bad info
I think your lower burr is not flat. if it was just tilting issue, the area on both sides should slightly touched but the ink was conmpletely clean. I also noticed the ink on the opposite side, 180degrees, was partly clean.
You might be right. I hate aligning burrs. I sold it anyway but will be testing DF83V
Did you try to align the upper burr?
It looked about the same as the bottom one. Do you think I should do something?
Would be nice to see the upper burr alignment in a quick youtube short 😃👌🏽
@@coffee_cneces you are right. I went over it to quickly but it is in this video for a moment. It looked very similar to the bottom burr. I agree I should have concentrated on that for longer.
How is the residual paint dealt with?
You can either wipe it off or grind some coffee and it will go away.
Bro, that counter is getting full lol I had to buy a separate table for all this stuff
Yeah, I have to sell few bits myself. Who needs pots and pans in the kitchen? 😛
@@mycoffeeshow111 Exactly! Thankfully my wife is a coffee nerd as much as me, so when I'm like "babe, look at the new DF83!" She just yells from the other room "I saw it already, just order it" 🥰
@@brianharman82 you are a very lucky man. this one is a keeper (both DF83 and your wife 😛)
@@mycoffeeshow111 no doubt! Until they release Wifey83, then I'll upgrade her 😂
@@brianharman82 haha , that is a good one.