I did a Ryzen 4 B550M build in this case and it turned out really well. the only problem I had could have been easier done was the Power supply which was not modular. Not a lot of room for cable management and using that HDD cage is not going to be posible. I managed to get all my ARGB lights to work together. I thought how should I put the components in it which color. I decided not to worry about that. Mostly black but the graphics card i choice to put in it was an Ark A580 which was blue. With a RGB strip and heatsink and even a hub it looks out standing. I did have to move one MB stand off and ad 2 more.
Hey, I am about to buy this case but I have a few questions , can you detach the 3 3 pin 5 volt Argb fan cable from the molex thing so I can plug it directly into the motherboard.And also the fan headers, and that do you think a 4070ti can fit in that case? On the product page it says the case can fit 360mm graphics card but I wanna be sure if it can because I’ve seen videos of people’s graphics card not fitting in their case. Thanks
As far as the fans go you have to use the molex plugs either way. You can run the ARGB to your motherboards 3 pin 5v argb header to run the leds but the fans still have to run off the molex as they do not have 3 or 4 pin pwm connectors. they only have molex. I'll have to measure and get back to you on the video card that way I know for sure.
@@FireMedic1111 thanks, so for the argb 3pin cable, is there just one cable or is there one cable per fan. I’m asking because I don’t know how much argb splitters I need. Thanks again
@@Altlittleguy So the controller is built into the rear fan and that's the fan that has the 3 pin 5v argb line. So only 1. The other fans are controlled/daisy chained through the molex connectors. Hope that helps
Do you know any b550m motherboards that will fit the q1 case? Debating on if i should just build a pc that will just run on a 5600g and then buy the q3 for my main build
Any of mini ITX or those smaller mini ATX boards. Size is like 9.6 X like 8.4 or something. I know my daughters gigabyte b450m ds3h wifi that we got on a microcenter deal came with a R5 3600 fits in q01 case.
Mine already came configured this way, but the rear fan should have a wire coming off it with only 2 wires the reset button wire should plug into that. Let me know if you need anymore help with it.
The 5v 3 pin ARGB you can yes. but if you are talking about a 3 pin pwm for speed control then no because they only have molex . But for the LEDS yes there is one 3 pin that can connect to the ARGB header on your motherboard and control the LEDs on all the fans.
The in-built rgb controller is getting 5v power from the molex connector connected to the PSU, instead of from the mobo. You can remove the 5v pin from the molex to fix it. I have a video on my channel that goes into more detail.
I did a Ryzen 4 B550M build in this case and it turned out really well. the only problem I had could have been easier done was the Power supply which was not modular. Not a lot of room for cable management and using that HDD cage is not going to be posible. I managed to get all my ARGB lights to work together. I thought how should I put the components in it which color. I decided not to worry about that. Mostly black but the graphics card i choice to put in it was an Ark A580 which was blue. With a RGB strip and heatsink and even a hub it looks out standing. I did have to move one MB stand off and ad 2 more.
definitely earned this sub I ordered the exact same case same color and all thanks i was needing to find a video about it!!
The Q03 is 15.4 x 11 x 14.6 inches the Q01 is 14.09 x 10.82 x 14.17 inches
the fans are okay it is the controller that is weird.
How do you get the Rgb to turn on?
Hey, I am about to buy this case but I have a few questions , can you detach the 3 3 pin 5 volt Argb fan cable from the molex thing so I can plug it directly into the motherboard.And also the fan headers, and that do you think a 4070ti can fit in that case? On the product page it says the case can fit 360mm graphics card but I wanna be sure if it can because I’ve seen videos of people’s graphics card not fitting in their case.
Thanks
As far as the fans go you have to use the molex plugs either way. You can run the ARGB to your motherboards 3 pin 5v argb header to run the leds but the fans still have to run off the molex as they do not have 3 or 4 pin pwm connectors. they only have molex. I'll have to measure and get back to you on the video card that way I know for sure.
I'm pretty sure it can
@@FireMedic1111 thanks, so for the argb 3pin cable, is there just one cable or is there one cable per fan. I’m asking because I don’t know how much argb splitters I need. Thanks again
@@Altlittleguy So the controller is built into the rear fan and that's the fan that has the 3 pin 5v argb line. So only 1. The other fans are controlled/daisy chained through the molex connectors. Hope that helps
quick question, do you think i can fit my 3 fan rx 5700 xt its the nitro+ variant i think its 331mm. but the case dose not state the size limit
I think I read that 330 is the maximum but ill check for sure and get back to you.
The booklet that came with it says it fits up to a 360 mm GPU so.. I know I forgot to mention something in the video ... Sorry and thanks for the sub.
Do you know any b550m motherboards that will fit the q1 case? Debating on if i should just build a pc that will just run on a 5600g and then buy the q3 for my main build
Any of mini ITX or those smaller mini ATX boards. Size is like 9.6 X like 8.4 or something. I know my daughters gigabyte b450m ds3h wifi that we got on a microcenter deal came with a R5 3600 fits in q01 case.
how can you reroute the reset switch to the rbg thing?
Mine already came configured this way, but the rear fan should have a wire coming off it with only 2 wires the reset button wire should plug into that. Let me know if you need anymore help with it.
Hey can u connect the 3 pin to the motherboard and control all 3 fans from that one connector ?
The 5v 3 pin ARGB you can yes. but if you are talking about a 3 pin pwm for speed control then no because they only have molex . But for the LEDS yes there is one 3 pin that can connect to the ARGB header on your motherboard and control the LEDs on all the fans.
@@FireMedic1111 ty just bought it for 60 dollars can’t wait to swap
I connect the 3 pin to my mobo and when i close the pc the fans still runs loll why or what could i do
The in-built rgb controller is getting 5v power from the molex connector connected to the PSU, instead of from the mobo. You can remove the 5v pin from the molex to fix it. I have a video on my channel that goes into more detail.