This video is the BEST ever way to set up for 3pos switch. Better than airplane setup with mixing on CH5/6. I could listen to your accent (RU/EN) all day, I used to work with a few Russian/Bulgarian guys here in Aus. I loved it. Thanks Kirikset
Thank you soooooo much... I have had so many set backs with the turigy 9x transmitter.I came across your post and you my friend saved me alot of trouble. Turhigy 9x and naza up and flying!!!!!!! Thanks again for the INFO
I honestly started to think my DJI Naza was faulty. Spent many hours trying to get escs to arm. Radio was set right and everything. Using the rmilec lrs and turnigy x9 radio. But after watching your video it fixed everything. Cheers mate. Perfect explanation video. For the amount of investment made on the controller and the gps, I wish they had better setup videos. BTW problem was the safety start up, needs to be in atti mode and move both sticks to bottom left and it will start up.
Thanks much! My F450 Flamewheel with Naza controller is almost complete. I just received my GPS yesterday and I was getting worried about setting it up with my Turnigy 9x (modfied with FrSky module). I'm grateful you put this video together. It is going to help me tremendously!
Great video, thankyou! Spent days interpreting those horrible manuals but this video explains setup very well. For noobs, it would be good to include some definitions of terms, too.
Thank You Very Much! The video with the remote on the right side and NAZA assistant on the left was brilliant! I had one thing reversed, now everything works great, Kudos on the most excellent video!
Thanks for the great video, sorted most of my questions, I just have to get the toggle 3 way switch set so up is GPS, middle is Atti and bottom is failsafe. then course lock and heading lock on a couple of the 2way switches and I should be all set. Thanks again you are very clear in instructions only the assistant is old version but I followed well enough with the newer version I am using.
Thank You, for taking time out of your day to help me, that was every helpful you know what you are doing. I'm new to Quads and with your help I will get it right. I hope you have a great day! :) where do you live?
You have the best Video that I have seen on the two items I use and feel are great for the price! I was afraid to use the software till I seen your video. so Thank You, you did a great job!!! :) I have the Flame Wheel 450 and a Sky Fly 9X with a FrSKY 2.4GHz JR Combo Pack in it what a good set up for less then $100. US I can get 1.5K out of the box with it! you are more then helpful! you did a GREAT JOB!!
@1janak1 did you let the gyro initialize before taking off (5 solid seconds) also there is a thread on RC groups that talks about the bullet plug from the esc. To hard solder the cables to the esc instead of using those bullet plugs. I have a friend that did it, twitching was eliminated.
I yould start by incrementally lowering pitch and roll basic gains. To set up gains you should start from low values like 60 and go up until your copter starts to oscilate on the axis you are tuning and than decrease the gain a bit. In your case just lower them until your f450 still levels itself quickly after a quick stick inut but does not overshoot or oscilate. Use remote gains adjustment,it makes life simpler)
I'd be glad) Could you provide some instructions how to set a turnigy 9x to have a 3-way switch activate 3 flight modes of the NAZA in plane mode? It would be awesome! I only managed to get it with a quirky workaround with pitch curves and 3 heli modes. Your insight would be great!
I'll soon get down to making tonst of videos on my current setups. It's been a crazy summer. I've been trying to build, test and fly lots of new models, because from november til may there is basically very little opportunity to fly anything but DLG and big multirotors for me.
Hi there this video helped me out loads on my th9x, I'm thinking of flashing my th9x with the er9x firmware...my question is to you will these settings work with the er9x firmware? Thanks ...
Thanks! 1) may seem crazy weird but I find it the easiest to set up mode switching. I describe in the video how I use flat pitch curves to choose flight modes. Basically you can assign 3 pitch curves to 3 positions of a 3 way switc on Turnigy 9x in heli mode. To do it in plane or glider modes you have to use lots of mixes and it all gets unwieldy to adjust late. Yuou don’t have to do it if you want only 2 modes on 1 switch or have a better radio with a dedicated 3-position gyro or gear switch.
I followed everything you said and my quad is flying perfect. I also set the gimble control and IOC to the left handed knobs. Very easy configuration. Thank you. Did you configure the GPS as well. I tried but could not get it to read out the green flashing led to tell me that it was in gps configuration mode. Maybe I didn't do it right.
are you using a stock Turnigy 9x radio module? If so, I'm sorry to inform you that it does not have failsafe. You should either do without failsafe or buy a better radio module (like FrSky two way radio module with telemetry that I use)
Hello I am setting up my new turnigy 9xv2 with naza v2. I have u channel from the naza connected t o chan 6. the 3 way switch works but the throttle is bound to the u channel and therefore moves my control mode. How do you unbound the throttle to the u channel? thanks for your helpful video.
I am getting a Naza GPS so would it be possible to set my three way switch to GPS-->Fail safe-->Altitude mode and just forget about the manual mode? I have a turnigy 9x tx
Does switching off the TX shows up as a Fail-safe in the Software? If not then the Fail-safe is not set up correctly. Also, if you have GPS choose whether you want the quad to fly to you and land or land on the spot of loosing the signal (Autopilot->Enhanced Fail-Safe method) If all is set up correctly, fail-safe without the GPS results in a flashing LED and a quad starting to descend to the ground.
do you have a set up video on the GPS and the camera? that can help me set them up a little better, I will be buying the GPS soon and would like to know how hard it is to set up. Thank You,
Hi, thanks for your quick response. I just want to know how to setup my turnigy 9x with home lock or course lock, since I cannot have both configured. It will help a lot for sure since I'm a begginner. :)
yes i followed your video did everything when not hooked to pc light goes green than orange flashing and csc arming both sticks to bottom left did it all
Thanks for your fantastic video. Just two question: 1. Why do you set it on heli mode? 2. Is it normal that motors startup very fast? Thanks for your comments.
Any video with new configuration ? I have same Turnigy 9X v2 , with FrSky D8R rx and DJT mod. and try to figure out withc is the best solution setup. Any difference true the setup from this video and FrSky ?
Sorry for my ignorance kirikset. The video is fantastic but I dont understand why do you set up the 7 and 8 chanels, because I understand the fly mode (U) in the naza controller is assigned to the chanel 5 of the reciver. thank you for your help
HI Thanks for the helpful video. I've got an interesting issue which i can't solve. DJI assistant shows me in the TX Cali window that each slider is green, but my sliders do not move at all when moving the sticks.(Also the MC Output is "On" i notice yours isn'y in the video) I did notice that when i power up the Quad that the Versatile Unit, and Receiver power up fine but the ESC's make no noise at all?? I'm using a HK Power distirbution board, and Turnigy 30amp Esc's with Sbecs built in. Any help would be great.
2) not quite sure. You should check esc min-max throttle calibration and try adjusting motor idle speed in the naza controller to the left (slower speed).
I'm very pleased to hear that! Trying to be helpful. There are more videos coming about in-flight tuning of NAZA and a review of FrSky telemetry system. As soon as I'm done with my exams. I hope to deliver at least 1 video before the end of June.
Hello, I followed all the steps :). But my problem that my dji f550, naza-m lite with turnigy 9x mode 2 (v2), my problem that can't start the motor's! ! I'm not sure what is wrong/problem and really need help (please). Many thanks
Hi - thanks for this video. have you or do you know anyone who has successfully configured the turnigy 9x with the DJI WKM? I'm fairly new to this hobby, but I'm told that the WKM is the best in the industry and the 9x may not work - thoughts?
what happens if you take your naza out of the copter, connect it to the VU, power it up with nothing hooked up? Does it flash the light like a normal start up sequence? Try connecting to the pc to check the the light turning green and wheather the naza sees you transmitter input. Also check ESC's and motors by hooking them up to the transmitter directly, calibrating, checking all settings on them and running your motors. could you please share what you've checked and are 100% shure that works?
Hi, I just got my Naza but new to the quad, what is the first step to get the driver and software downloaded into my computer. There was no information that came with the DJI Naza what steps need to be taken when you received the unit. Will be so kind and tell me what steps need to be taken. Thanks. FW
Hi, I would also really appreciate a video for IOC. I have a Turnigy 9X and I don't know how to change the endpoints to assign "home lock" and "off" to GEAR switch. Thank you very much for your video, it was very helpful.
Hi I have a NAZA M LITE but it will not let my computers see it, I have tried the fix for drivers with no luck. I have windows 7 8 10 and a 7 I got to see if it will connect with the same results will not load no usb. 4 week so far the unit is good DJI said go find help so I have been asking for ideas.
have you run stick calibration? are ESC's connected according to the manualand wired correcttly? do you perform one of the CSC movements to arm the NAZA (like both sticks to the bottom left), are all channels reversed correctly according to the NAZA software? What color does NAZA flash after it swiotches on if not connected to the pc?
Ohh I see, so the best thing if I want to use home lock is to change to Frsky. Now that you are being so nice. I dont know how far I can use my radio without losing signal. Is there a way to setup the turnigy to use failsafe when I turn the radio off?
HELLOOOO INEED HEP REGARDING AVIONIX TH9B,AM USING SAME TRANSMITTER RECIVER AND I CANT FIND ANY PEOPLE USING THIS BRAND AND I JUST WANT TO KNOW DID YOU EVER FACED ANY PROBLEM WITH THIS TRANSMITTER????PLZ REVIEW AND REPLY BACK
Hi I tried to calibrate by control sticks but my rutter is staying 3 marks towards right i tried the calibration so many times but no help i think my settings are off for the rutter can you help me? Thanks
hi, I found and solved the probleme (broken connection between two pins on the upper plate). Now I`m soon ready to go..but can I ask...Is it either gps or failsafe? If both, how can I set it.
Hi, it would never let me change it I had it made for me and when I down loaded the software it will not work? it comes up but when I plug it to my quad it's like I never plugged it up? I can not change the setting? and this was from day one I got it? I may have to send it back to them. and have them work on it. but then I will be with out my quad for 2 to 3 weeks. it did something last night it started spinning around I had to go to my subtrim's and input 100% to get it to stop spinning!?
I called the store and they walked me through the steps on how to down load the software but it will not work on my quad? maybe the ESC is not working??? I/m so lost I do not know what to do next? I can not find the software now on there web-sight do you have a link I can go to to get it? I will try to down load it again to see if some thing went bad when I did it the fist time.
Hi kirikset, thank you very much for yuor video, it helped me a lot. Is it possible for you to post a video about IOC? I have the same radio as yours but I dont know how to do it properly. I appreciate if you could help us out! Thanks again
hey mate i have a spectrum dx8 and I plugged in all the plugs in the right spots and i turn it on and it flashes does the normal flashes and then does the 3 green flashes then it flashes red and when i connect to pc i have 8 errors and it says i have too call naza do u think i have a broken unit?? thanks
I'm running into a problem with my setup, which is really close to your's. I am using Naza M Lite and Turnigy 9X 8C, but I can not seem to get out of Fail-Safe . I can not get Attitude or M to turn blue under Control Mode Switch. Do you have any suggestions? Thank you for the help.
I followed your video and everything works except for one thing - elevator axis. When I connect naza assistant it seems like it moves only in one direction (pitch down) and it's twitching a lot. I double checked the cables (replaced the one on E) with no success. Any help will be greatly appreciated.
Sorry, accidentally voted your reply down( One more question: does your receiver support fail-safe? if you have the Naza connected to the PC does it go to fail-safe mode when you turn off the transmitter? What receiver -transmitter combo do you have? Is fail safe set up correctly on the receiver?
Hi. im using a Turnigy 9x and getting a CFG-ERR on dji naza assistant program. this is the error: CFG-ERR Configuration error, this may cause by firmware upgrade from old version. or abnormal Tx calibration. Re-calibrate your transmitter, and power cycle your controller and check all of the parameters. Is there someone who know what i should do?
hi there I cannot set up the transmitter link loss failsafe on either of my naza m v2's. the turnigy 9x just will not work. I am using standard v2 with v2 module and rx when I turn off the transmitter it just stays in the air until I switch the radio back on and retake control. as far as the 9x failsafe I have tried to use it to activate the failsafe value on the three position switch and this does not work either. any ideas.....I am starting to think of a futaba t8j.........!
I'm not sure but I think all this radios are created different depends on geographical location. I think it's a good video. Did teach me more about Turnigy 9X 9ch radio.
It fly's great till last night it started spinning around. but from day one I never could use the software on my quad it will not read the quad? it's like it was never plugged up? or maybe the I did not down load it right? I called the store I picked up my quad from but they told me to send it to them? not much help. I can not send my quad out every time there is some thing I can fix, it cost a lot of money and time. I get a green light when I plug it up but that's all. it will not do a thing.
Hi) It's ok I may be confusing you in the video. I set up extra channels to later plug them into remote gain ports and after that use them to switch on/off orientation leds remotely. Would you like to see more setup videos? or more flight ones?
question to you, or anybody. set it up exactly like the video same transmitter Naza v2. My problem is the throttle on my transmitter moves the rudder on Naza assistant, and the rudder on my transmitter moves the throttle on naza assistant. its like they're reversed. my transmitter is a Mode 2 (throttle and rudder on the left) receiver is connected as follows... ch1> A. ch2> E. ch3> T ch4> R. any help from anybody would be greatly appreciated
I can not get it to ask me to register so it will not work? I think my esc is bad!? but thank you for getting back to me. I have ordered a new one to see if it will work? I do not know what is going on with it, but I will get back to you. have a great day!
Извиняюсь, не очень понимаю ваш вопрос, могли бы иначе сформулировать? Да, для запуска моторов необходимо делать Arm после включения NAZA. И не совсем всегда при снижении до 0 канала throttle будут останавливаться моторы. Подробно это написано в последних версиях мануала к DJI Assistant и в самой программе. Посмотрите подробнее настройки manual/intelligent относительно остановки моторов. Они остановятся сразу в режиме manual, даже в полете. в intelligent логика хорошо в инструкции описана.
My GPS unit has not arrived yet( I currently have no idea how it is set up, seems to be just plug, mount and adjust two gains. I will however do a video on how to dial in gimbal parameters the best possible performance as soon as my hex is up and running (about a week or so)
hello it is a great video and i'm using the same parts as you do but i cant arm the copter program see the th9x its working calibration is ok every thing is done but when i unpluge the naza from computer drone doesnt arm and take off motors are not runing bottom line i can't arm the copter can you please help me with that if you want i can share a video also....
Hello. I also have a Turnigy 9X transimtter and receiver. I have followed your instructions 100% step by step over and over again. But can not get rid of the error cfg 8. Your help will be highly appreciated. By the way, your video is the best I`ve seen of this kind.
I do not own WKM, it is an overkill for my smaller quadcopter and I really have no complaints or missing features compared to WKM to buy it for my much bigger hexacopter. I do not know anyone personally and have not seen step by step setups. Maybe check DJI youtube channel, they seem to post lots of tips. 9x may be not enought if you want to use all features at the same time and i strongly advise againts using it with stock radio link as it lacks fail-safe. If in no hurry - buy frsky taranis
This video is the BEST ever way to set up for 3pos switch.
Better than airplane setup with mixing on CH5/6.
I could listen to your accent (RU/EN) all day, I used to work with a few Russian/Bulgarian guys here in Aus. I loved it. Thanks Kirikset
Superb video. I was panicking when I saw the 42 page manual, but this video really clears it up.
Thank you soooooo much... I have had so many set backs with the turigy 9x transmitter.I came across your post and you my friend saved me alot of trouble. Turhigy 9x and naza up and flying!!!!!!! Thanks again for the INFO
I honestly started to think my DJI Naza was faulty. Spent many hours trying to get escs to arm. Radio was set right and everything. Using the rmilec lrs and turnigy x9 radio. But after watching your video it fixed everything. Cheers mate. Perfect explanation video. For the amount of investment made on the controller and the gps, I wish they had better setup videos. BTW problem was the safety start up, needs to be in atti mode and move both sticks to bottom left and it will start up.
Thanks much! My F450 Flamewheel with Naza controller is almost complete. I just received my GPS yesterday and I was getting worried about setting it up with my Turnigy 9x (modfied with FrSky module). I'm grateful you put this video together. It is going to help me tremendously!
Great video, thankyou! Spent days interpreting those horrible manuals but this video explains setup very well. For noobs, it would be good to include some definitions of terms, too.
Thanks, I've heard people speak it both ways but learned the correct one only after the video went live.
Thank You Very Much! The video with the remote on the right side and NAZA assistant on the left was brilliant! I had one thing reversed, now everything works great, Kudos on the most excellent video!
The best video for connect turnigy to naza!! Great video.... Bravo from Greece!!!
The best set of instructions for this setup. Thank you
This video has all the info i need to use other radios with my dji phantom. Thank you very much for this very informational video!!!!
Thanks for making this video. It helped with most of my set up.
SERIOUSLYY I LOVE YOU FOR THIS VIDEO.......UR THIS VIDEO HELPED ALOT FOR MY DJI NAZA SET UP
Thanks for the great video, sorted most of my questions, I just have to get the toggle 3 way switch set so up is GPS, middle is Atti and bottom is failsafe.
then course lock and heading lock on a couple of the 2way switches and I should be all set.
Thanks again you are very clear in instructions only the assistant is old version but I followed well enough with the newer version I am using.
Thank You, for taking time out of your day to help me, that was every helpful you know what you are doing. I'm new to Quads and with your help I will get it right. I hope you have a great day! :) where do you live?
You have the best Video that I have seen on the two items I use and feel are great for the price! I was afraid to use the software till I seen your video. so Thank You, you did a great job!!! :) I have the Flame Wheel 450 and a Sky Fly 9X with a FrSKY 2.4GHz JR Combo Pack in it what a good set up for less then $100. US I can get 1.5K out of the box with it! you are more then helpful! you did a GREAT JOB!!
Thank You for this great tutorial. Very helpful
@1janak1 did you let the gyro initialize before taking off (5 solid seconds) also there is a thread on RC groups that talks about the bullet plug from the esc. To hard solder the cables to the esc instead of using those bullet plugs. I have a friend that did it, twitching was eliminated.
Hi i have a DJI phantom 1 and i have a turnigy 9x. can i do the same setup like you in this video?
how to calibrate the motors like we do in libre pilot?
thx for this video, helped me a lot
Thanks for the answer !
I dont think a novice (like me) really will use manual mode anyway,I just got my Naza today and GPS is on its way.
I yould start by incrementally lowering pitch and roll basic gains. To set up gains you should start from low values like 60 and go up until your copter starts to oscilate on the axis you are tuning and than decrease the gain a bit. In your case just lower them until your f450 still levels itself quickly after a quick stick inut but does not overshoot or oscilate. Use remote gains adjustment,it makes life simpler)
excellent u know your stuff thank you for your help life saver
I'd be glad) Could you provide some instructions how to set a turnigy 9x to have a 3-way switch activate 3 flight modes of the NAZA in plane mode? It would be awesome! I only managed to get it with a quirky workaround with pitch curves and 3 heli modes. Your insight would be great!
you are the best!!
the new version of naza m lite doesnt have the "write" option .
so how can I write data in the new version???
Great vid!
I'll soon get down to making tonst of videos on my current setups. It's been a crazy summer. I've been trying to build, test and fly lots of new models, because from november til may there is basically very little opportunity to fly anything but DLG and big multirotors for me.
Hi there this video helped me out loads on my th9x, I'm thinking of flashing my th9x with the er9x firmware...my question is to you will these settings work with the er9x firmware?
Thanks ...
How do you do compass calibration if you have the 3 position switch set to FS-A-M modes?
everyone says use acro for turnigy 9x and quadcopter, so i need those settings
Thanks! 1) may seem crazy weird but I find it the easiest to set up mode switching. I describe in the video how I use flat pitch curves to choose flight modes. Basically you can assign 3 pitch curves to 3 positions of a 3 way switc on Turnigy 9x in heli mode. To do it in plane or glider modes you have to use lots of mixes and it all gets unwieldy to adjust late. Yuou don’t have to do it if you want only 2 modes on 1 switch or have a better radio with a dedicated 3-position gyro or gear switch.
I followed everything you said and my quad is flying perfect. I also set the gimble control and IOC to the left handed knobs. Very easy configuration. Thank you. Did you configure the GPS as well. I tried but could not get it to read out the green flashing led to tell me that it was in gps configuration mode. Maybe I didn't do it right.
I happen to use heli because for me it lets me set a 3way switch on the turnigy 9 x for flight modes. I was not able to do it in acro.
Can I use versatility unit (with USB cable) from Naza MC 2.0 to plug in to NAZA lite MC for programming Naza lite?
are you using a stock Turnigy 9x radio module? If so, I'm sorry to inform you that it does not have failsafe. You should either do without failsafe or buy a better radio module (like FrSky two way radio module with telemetry that I use)
does the receiver stay connected to the naza inside the quadcopter once everything is calibrated? Also why did you skip channel 5 on the receiver?
Hello I am setting up my new turnigy 9xv2 with naza v2. I have u channel from the naza connected t o chan 6. the 3 way switch works but the throttle is bound to the u channel and therefore moves my control mode. How do you unbound the throttle to the u channel? thanks for your helpful video.
I am getting a Naza GPS so would it be possible to set my three way switch to
GPS-->Fail safe-->Altitude mode and just forget about the manual mode?
I have a turnigy 9x tx
Does switching off the TX shows up as a Fail-safe in the Software?
If not then the Fail-safe is not set up correctly.
Also, if you have GPS choose whether you want the quad to fly to you and land or land on the spot of loosing the signal (Autopilot->Enhanced Fail-Safe method)
If all is set up correctly, fail-safe without the GPS results in a flashing LED and a quad starting to descend to the ground.
You saved me A LOT of time! very good step by step tutorial for Turnigy 9x.
i have the same problema do you fixed???
do you have a set up video on the GPS and the camera? that can help me set them up a little better, I will be buying the GPS soon and would like to know how hard it is to set up. Thank You,
You can see the settings for V Hexa-rotor. For a quad just choose appropriate configurationd and start with lower gains.
Hi, thanks for your quick response. I just want to know how to setup my turnigy 9x with home lock or course lock, since I cannot have both configured. It will help a lot for sure since I'm a begginner. :)
yes i followed your video did everything when not hooked to pc light goes green than orange flashing and csc arming both sticks to bottom left did it all
Thanks for your fantastic video. Just two question: 1. Why do you set it on heli mode? 2. Is it normal that motors startup very fast? Thanks for your comments.
Any video with new configuration ?
I have same Turnigy 9X v2 , with FrSky D8R rx and DJT mod. and try to figure out withc is the best solution setup.
Any difference true the setup from this video and FrSky ?
Sorry for my ignorance kirikset. The video is fantastic but I dont understand why do you set up the 7 and 8 chanels, because I understand the fly mode (U) in the naza controller is assigned to the chanel 5 of the reciver.
thank you for your help
HI Thanks for the helpful video. I've got an interesting issue which i can't solve. DJI assistant shows me in the TX Cali window that each slider is green, but my sliders do not move at all when moving the sticks.(Also the MC Output is "On" i notice yours isn'y in the video) I did notice that when i power up the Quad that the Versatile Unit, and Receiver power up fine but the ESC's make no noise at all?? I'm using a HK Power distirbution board, and Turnigy 30amp Esc's with Sbecs built in. Any help would be great.
Awesome video about Naza setup with Turnigy 9x. Manual does not say lot's of stuff.
2) not quite sure. You should check esc min-max throttle calibration and try adjusting motor idle speed in the naza controller to the left (slower speed).
I'm very pleased to hear that! Trying to be helpful. There are more videos coming about in-flight tuning of NAZA and a review of FrSky telemetry system. As soon as I'm done with my exams. I hope to deliver at least 1 video before the end of June.
Hello, I followed all the steps :). But my problem that my dji f550, naza-m lite with turnigy 9x mode 2 (v2), my problem that can't start the motor's! !
I'm not sure what is wrong/problem and really need help (please). Many thanks
Hi - thanks for this video. have you or do you know anyone who has successfully configured the turnigy 9x with the DJI WKM? I'm fairly new to this hobby, but I'm told that the WKM is the best in the industry and the 9x may not work - thoughts?
what happens if you take your naza out of the copter, connect it to the VU, power it up with nothing hooked up? Does it flash the light like a normal start up sequence? Try connecting to the pc to check the the light turning green and wheather the naza sees you transmitter input. Also check ESC's and motors by hooking them up to the transmitter directly, calibrating, checking all settings on them and running your motors. could you please share what you've checked and are 100% shure that works?
Hi,
I just got my Naza but new to the quad, what is the first step to get the driver and software downloaded into my computer. There was no information that came with the DJI Naza what steps need to be taken when you received the unit. Will be so kind and tell me what steps need to be taken. Thanks.
FW
Hi, I would also really appreciate a video for IOC. I have a Turnigy 9X and I don't know how to change the endpoints to assign "home lock" and "off" to GEAR switch. Thank you very much for your video, it was very helpful.
was this for a X or I quad set up? and your video is the best I have seen.
Hi I have a NAZA M LITE but it will not let my computers see it, I have tried the fix for drivers with no luck. I have windows 7 8 10 and a 7 I got to see if it will connect with the same results will not load no usb. 4 week so far the unit is good DJI said go find help so I have been asking for ideas.
have you run stick calibration? are ESC's connected according to the manualand wired correcttly? do you perform one of the CSC movements to arm the NAZA (like both sticks to the bottom left), are all channels reversed correctly according to the NAZA software? What color does NAZA flash after it swiotches on if not connected to the pc?
Ohh I see, so the best thing if I want to use home lock is to change to Frsky. Now that you are being so nice. I dont know how far I can use my radio without losing signal. Is there a way to setup the turnigy to use failsafe when I turn the radio off?
did you install the USB drivers for the naza???
HELLOOOO INEED HEP REGARDING AVIONIX TH9B,AM USING SAME TRANSMITTER RECIVER AND I CANT FIND ANY PEOPLE USING THIS BRAND AND I JUST WANT TO KNOW DID YOU EVER FACED ANY PROBLEM WITH THIS TRANSMITTER????PLZ REVIEW AND REPLY BACK
Hi
I tried to calibrate by control sticks but my rutter is staying 3 marks towards right i tried the calibration so many times but no help i think my settings are off for the rutter can you help me?
Thanks
how to connect or pair the remote controller with the flight controller?
I'am having a problem with my naza assistance solfware at thd bottom box that said mc output on or off,my saids on and do I turn it off.? Thanks
my control mode switch are moving when i move the throttle up or down, any solutions? thanks
I have the driver, thank you. It is on my desktop (screen) now how do I install in in the computer so that it will recognize my hardware?
hi, I found and solved the probleme (broken connection between two pins on the upper plate). Now I`m soon ready to go..but can I ask...Is it either gps or failsafe? If both, how can I set it.
Hi, it would never let me change it I had it made for me and when I down loaded the software it will not work? it comes up but when I plug it to my quad it's like I never plugged it up? I can not change the setting? and this was from day one I got it? I may have to send it back to them. and have them work on it. but then I will be with out my quad for 2 to 3 weeks. it did something last night it started spinning around I had to go to my subtrim's and input 100% to get it to stop spinning!?
I called the store and they walked me through the steps on how to down load the software but it will not work on my quad? maybe the ESC is not working??? I/m so lost I do not know what to do next? I can not find the software now on there web-sight do you have a link I can go to to get it? I will try to down load it again to see if some thing went bad when I did it the fist time.
Hi kirikset, thank you very much for yuor video, it helped me a lot. Is it possible for you to post a video about IOC? I have the same radio as yours but I dont know how to do it properly. I appreciate if you could help us out! Thanks again
hey mate i have a spectrum dx8 and I plugged in all the plugs in the right spots and i turn it on and it flashes does the normal flashes and then does the 3 green flashes then it flashes red and when i connect to pc i have 8 errors and it says i have too call naza do u think i have a broken unit?? thanks
I'm running into a problem with my setup, which is really close to your's. I am using Naza M Lite and Turnigy 9X 8C, but I can not seem to get out of Fail-Safe . I can not get Attitude or M to turn blue under Control Mode Switch. Do you have any suggestions?
Thank you for the help.
I followed your video and everything works except for one thing - elevator axis. When I connect naza assistant it seems like it moves only in one direction (pitch down) and it's twitching a lot. I double checked the cables (replaced the one on E) with no success. Any help will be greatly appreciated.
Sorry, accidentally voted your reply down(
One more question: does your receiver support fail-safe?
if you have the Naza connected to the PC does it go to fail-safe mode when you turn off the transmitter?
What receiver -transmitter combo do you have?
Is fail safe set up correctly on the receiver?
Excellent Video
Hi. im using a Turnigy 9x and getting a CFG-ERR on dji naza assistant program.
this is the error: CFG-ERR
Configuration error, this may cause by firmware upgrade from old version. or abnormal Tx calibration. Re-calibrate your transmitter, and power cycle your controller and check all of the parameters.
Is there someone who know what i should do?
hi there
I cannot set up the transmitter link loss failsafe on either of my naza m v2's.
the turnigy 9x just will not work. I am using standard v2 with v2 module and rx
when I turn off the transmitter it just stays in the air until I switch the radio back on and retake control.
as far as the 9x failsafe I have tried to use it to activate the failsafe value on the three position switch and this does not work either.
any ideas.....I am starting to think of a futaba t8j.........!
Nice video :)
I'm not sure but I think all this radios are created different depends on geographical location. I think it's a good video. Did teach me more about Turnigy 9X 9ch radio.
It fly's great till last night it started spinning around. but from day one I never could use the software on my quad it will not read the quad? it's like it was never plugged up? or maybe the I did not down load it right? I called the store I picked up my quad from but they told me to send it to them? not much help. I can not send my quad out every time there is some thing I can fix, it cost a lot of money and time. I get a green light when I plug it up but that's all. it will not do a thing.
Hi...very nice work...
I have the Naza with GPS and I can not set the 3-position switch.
Can you explain how?
many thanks
its ok, so I understand you set up as well channels 5 and 6.
thanks
как ты зделал что autopilot работает? у меня не работает
Hi) It's ok I may be confusing you in the video. I set up extra channels to later plug them into remote gain ports and after that use them to switch on/off orientation leds remotely. Would you like to see more setup videos? or more flight ones?
question to you, or anybody. set it up exactly like the video same transmitter Naza v2. My problem is the throttle on my transmitter moves the rudder on Naza assistant, and the rudder on my transmitter moves the throttle on naza assistant. its like they're reversed. my transmitter is a Mode 2 (throttle and rudder on the left) receiver is connected as follows...
ch1> A. ch2> E. ch3> T ch4> R.
any help from anybody would be greatly appreciated
My f450 bounces from left front to right rear how can I stop it from doing this? it is getting bad.
Mine is 6 channel transmitter can you show how to set up in DJI naza lite..thnx
It is possible that something has suffered damage under the rain you've described.
I can not get it to ask me to register so it will not work? I think my esc is bad!? but thank you for getting back to me. I have ordered a new one to see if it will work? I do not know what is going on with it, but I will get back to you. have a great day!
Извиняюсь, не очень понимаю ваш вопрос, могли бы иначе сформулировать? Да, для запуска моторов необходимо делать Arm после включения NAZA. И не совсем всегда при снижении до 0 канала throttle будут останавливаться моторы. Подробно это написано в последних версиях мануала к DJI Assistant и в самой программе. Посмотрите подробнее настройки manual/intelligent относительно остановки моторов. Они остановятся сразу в режиме manual, даже в полете. в intelligent логика хорошо в инструкции описана.
понятно проста незнал слиш а пульт какой класный? dx8 t8j ? проста незнаю какой будет нормальный
My GPS unit has not arrived yet( I currently have no idea how it is set up, seems to be just plug, mount and adjust two gains. I will however do a video on how to dial in gimbal parameters the best possible performance as soon as my hex is up and running (about a week or so)
Hi I'm having trouble programming my Naza? it will not talk to my quad? can you help me? Please. the software is not working.
hello it is a great video and i'm using the same parts as you do but i cant arm the copter program see the th9x its working calibration is ok every thing is done but when i unpluge the naza from computer drone doesnt arm and take off motors are not runing bottom line i can't arm the copter can you please help me with that if you want i can share a video also....
+Izzet Romano ... when you are ready to "arm" or fly, position both pull both sticks to bottom corners.
great thank you so much :)
Hello. I also have a Turnigy 9X transimtter and receiver. I have followed your instructions 100% step by step over and over again. But can not get rid of the error cfg 8. Your help will be highly appreciated. By the way, your video is the best I`ve seen of this kind.
I do not own WKM, it is an overkill for my smaller quadcopter and I really have no complaints or missing features compared to WKM to buy it for my much bigger hexacopter. I do not know anyone personally and have not seen step by step setups. Maybe check DJI youtube channel, they seem to post lots of tips.
9x may be not enought if you want to use all features at the same time and i strongly advise againts using it with stock radio link as it lacks fail-safe. If in no hurry - buy frsky taranis