2007 Toyota Corolla Starter Motor

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ธ.ค. 2024

ความคิดเห็น • 38

  • @faizalbosch6302
    @faizalbosch6302 2 ปีที่แล้ว +12

    Finally someone that doesn't talk all this BS and just go straight to what we need to know

  • @Arbys_Enjoyer
    @Arbys_Enjoyer 3 หลายเดือนก่อน +1

    Thank you for the video, my starter went out in the autozone parking lot and this video helped me fix it up

  • @ThaTacoGuy1
    @ThaTacoGuy1 18 วันที่ผ่านมา

    Thank you for making this video! I was able to replace mine in less than an hour because of this guide.

  • @PRod7544
    @PRod7544 2 ปีที่แล้ว +5

    I laughed so hard when you put power back to the car! Almost like the car was like “watch this I’m gonna surprise the hell outta him” haha! Thanks for the informative video! Getting ready to do this myself but now I know to insert the key in the ignition before I hook the battery back up! Lol.

  • @tudong2446
    @tudong2446 3 ปีที่แล้ว +7

    Suggestion: unplug the negative terminal instead of positive. Using a short 8mm socket to push the 2 wire tied down clips out instead of pulling or prying.

  • @GigasAhriman
    @GigasAhriman ปีที่แล้ว

    Tip that helped me was when I was putting in the new starter, tighten the difficult bolt first and then the easy to see bolt

  • @MyAlbertC
    @MyAlbertC 4 หลายเดือนก่อน +1

    Nice job sir and great information 👍 😊

  • @1200s-e8n
    @1200s-e8n 2 ปีที่แล้ว +1

    That would have scared me too. You handled that well, amigo!

  • @YouDontKnowMe210tx
    @YouDontKnowMe210tx 7 หลายเดือนก่อน +1

    Good camera work though. I hate when mechanics skip everything.
    I NEED to see everything you do lol ty

  • @j.albertofuentes2874
    @j.albertofuentes2874 3 ปีที่แล้ว +3

    Removing the negative terminal will avoid the alarm to go off? And also won’t scared me like it did to you when the freaking alarm went off . 🤔🤔🤔 other than that..... good job

  • @curtisw.anthony3171
    @curtisw.anthony3171 ปีที่แล้ว +1

    Why did you wait to connect the wires to the starter until it was fully installed? Could you connect them before installing?

  • @marcoramirez3764
    @marcoramirez3764 หลายเดือนก่อน +1

    Good job thanks

  • @Technllcs
    @Technllcs 3 ปีที่แล้ว +3

    Would this be the same process for an 06 Corolla?

    • @EdPMur
      @EdPMur 3 ปีที่แล้ว

      I think so yes

    • @tirsovalls9122
      @tirsovalls9122 2 ปีที่แล้ว +1

      Same starter fits 03-08 TC, pretty safe to assume so, ultimately tho boils down to where the starter is located in the engine.

    • @YouDontKnowMe210tx
      @YouDontKnowMe210tx 7 หลายเดือนก่อน

      I have a 06 too. What's in the video is the same spot mine is too. You're good.

  • @prezaricardo1749
    @prezaricardo1749 2 ปีที่แล้ว

    Good video..Ready to do mine now. thanks

  • @julioperalta5819
    @julioperalta5819 3 ปีที่แล้ว +1

    very good video

  • @joehyundaitech7961
    @joehyundaitech7961 3 ปีที่แล้ว +1

    why did you remove the positive instead of the neg terminal on the battery just curious?

    • @tirsovalls9122
      @tirsovalls9122 2 ปีที่แล้ว +1

      Reason being, he correlated the positive terminal on the starter with the positive terminal on the battery, that's my understanding according to what he says towards the beginning of the vid. Apparently tho, according to someone else's comment and what sounds like could be your practice to disconnect the negative to cut of juice, still allowed for the car alarm to go off at end on the reconnect, I just went ahead and disconneted both terminals on the batt after watching this vid which was a definete help with the install.

  • @raysandoval4314
    @raysandoval4314 ปีที่แล้ว

    The 14mm are so tight what can I do to take them off?

    • @J-J-TL
      @J-J-TL ปีที่แล้ว

      Have you tried to loosen it with good o' WD-40?

    • @tracysmith9934
      @tracysmith9934 หลายเดือนก่อน

      ​@J-I used PB blaster and a lot of patience,

  • @user-cg7jp7jt4v
    @user-cg7jp7jt4v 7 หลายเดือนก่อน

    Can this be done without moving fan

    • @j00ktau
      @j00ktau 7 หลายเดือนก่อน

      yes but u would need to jack up the front of the car so I can grab the starter from underneath

    • @tracysmith9934
      @tracysmith9934 หลายเดือนก่อน

      Yes

  • @jameswhite1319
    @jameswhite1319 3 ปีที่แล้ว +1

    Thanks for sharing

  • @fronesis01
    @fronesis01 ปีที่แล้ว

    I'm from Panama and the Starter of my Corolla, doesnt started yesterday after I ended up my shit at work. One of the worst sensations ever.

  • @josephescoto7702
    @josephescoto7702 3 ปีที่แล้ว

    Where is the wire top to starter 1 wire go to wer

  • @Sinofpride504
    @Sinofpride504 2 ปีที่แล้ว

    Bruh I took the 2 14mm and the starter still attached not even loose

  • @marcoramirez3764
    @marcoramirez3764 หลายเดือนก่อน

    👍👍👍👍👍👍👍

  • @billyswafford2395
    @billyswafford2395 2 ปีที่แล้ว

    How to make baked beans

  • @ชงYoutube
    @ชงYoutube 4 ปีที่แล้ว +1

    👍

  • @AsanKatov
    @AsanKatov ปีที่แล้ว

    Стартер мичубиш 1,8Дизел. 88 година. ,
    3:24

  • @Roller76
    @Roller76 3 ปีที่แล้ว

    👉🏽Solenoid 👍🏽

  • @jdeast8569
    @jdeast8569 8 หลายเดือนก่อน +1

    Why is the starter replacement on the corolla so simple to do as compared to the honda civic? Civic is PITA to do and you have to get under the car. Extremely bad design. Corolla is the way to go. My Next car is Toyota

  • @josephescoto7702
    @josephescoto7702 3 ปีที่แล้ว

    Toyota Corolla 1998 gts