Thee absolute best Tundra Brake Pad change on TH-cam !!! Clear video and audio, well visualized and clean and clear audio well explained sequence of progression for replacement repair. Thank You Dan !!! You R De Repair Man !!!
Replace rotors, a few months go by, wobble wobble shake shake, rinse and repeat. I've gotten proficient at this job over the years, even when I drive the tundra gently. Great truck, except for the brakes. Oh, I didn't mention the rear drum troubles yet...
I've done several brake jobs on more traditional disc brakes. It surprised me a bit that nobody else was using any lube in other videos describing how to change out these Tundra ones. Thanks (I think?) for showing the right way to do it.
Hey! Really helpful video, I got the kit, and I am going to attempt this weekend. Just wanted to give you an update about the Max Advanced Coated kit, I ordered using the link you provided, and my kit came with new hardware metal clips for the pads and pins for the caliper bolts, (not new caliper bolts, just the retaining pins for them).
thank your for this video, the angles so i can see exactly what you are doing are perfect, since its my first time changing the brake pads on my Tundra
I’m going to replace/upgrade my friends rotors. These are really similar to the work I did on my g37 rotors and brake pads. It will be my second time doing so.
Great video. Just a heads up, usually you wanna take a wire brush to the brake pad pins. Then use anti seize on the pins. And far as the metal brake line hose from that c clip you removed it’s easer to remove that entire bracket 12mm socket provides more move ability. It was a good video ,,,,, I’ve seen a couple videos now where the pins are not being wire brushed I had a wired grinder at my work bench so it cleans it in a jippy lol. I work at toyota,,,,,,😁
Thx Damien, I agree, I think I would do the 12mm bolt on the metal brake line next time, and Yes, those pins really didn’t clean up too well with just the brake cleaner and paper towel. Great advice on the wire wheel on the bench grinder! Thanks for watching! Take care, -Dan the Fix it Man
Damien Bell Hey Damien since you work @ Toyota why my 04 v8 tundra have a much smaller brake reservoir than the one shown here, your input would b appreciated
Just thought I’d post that the brake line fastener on the steering knuckle is a pain. It uses a weird flared bolt head and nothing I had would grab onto it securely. If you can, have someone hold the caliper to avoid breaking the solid brake line and slap the rotor on real quick.
I wish the mechanics do it this way and grease that really nice and clen parts But No they do it as fastest they can and down o the road making noise slapping jobs and expensive
FYI...on the side of the rotor is a measurement stamped on the minimum width thickness. I found it's better just to buy new rotors instead of having them turned. The thinner they get...the more chance of warpage...just saying.
Hi RJ, No problem, I am happy to report that these brakes are working great. I don’t have too many miles on them yet, as it’s not my daily driver anymore, but so far so good. I did notice a little brake fade as they were getting hot during the initial bedding in process (pretty normal), but now under regular driving conditions, they are working fine and I have no complaints. Thanks for watching! Take care, Dan the Fix it Man
Hi Ryan, The idea is that they will cool down quicker and help dissipate the heat. So far, they seem to be working fine. Haven’t warped yet like the standard ones I have used in the past. Thanks for watching! -Dan the Fix it Man
Hi Mark, These came with that black coating on them already. It took a few days for it to burn off, but they stop great - much better than before. No complaints so far. Thanks for watching! -Dan the Fix it Man
When editing, I cut out a lot of footage to try to keep the videos shorter. I just double checked the truck and the clip is still there installed in place, so what I think happened is I had probably turned that pin so the clip was facing the other direction. Glad you noticed that though! Thanks for watching! -Dan the Fix it Man
This version of the master cylinder is a hydro boost, notice there is no vacuum booster on the back of it. This one is much more expensive to repair or replace and more difficult to work on than the traditional style that you have. Thanks for watching, -Dan the Fix it Man
@@mikegman7502 No worries, here’s a video that I made with your style of master cylinder and booster. The master cylinder was leaking into the booster. th-cam.com/video/V1Q83GDmplY/w-d-xo.html Good luck with it.
@@mikegman7502 it’s not too bad, but the third bleeder in the master cylinder threw me off a bit. I was lucky to find those instructions on how to bleed it. I put a screenshot of the instructions in the video. Take care, -Dan
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
Thee absolute best Tundra Brake Pad change on TH-cam !!! Clear video and audio, well visualized and clean and clear audio well explained sequence of progression for replacement repair. Thank You Dan !!! You R De Repair Man !!!
Yes good video
No doubt bro. I work on garage doors and have able to do everything on my truck with this channel
The "you wanna use a socket" totally killed me lol. Great video!
Haha, Thanks William. Always use the right tool for the job…or just use any tool you have in front of you.
Thx for watching!
Doing this job in about 5 minutes after I visit the John again after a late breakfast.
Thank you ! Excellent video skills
This video was exactly what I needed. Super great camera angles and dialogue! Definitely hit the clip with both a socket and a wrench 😅
Replace rotors, a few months go by, wobble wobble shake shake, rinse and repeat. I've gotten proficient at this job over the years, even when I drive the tundra gently. Great truck, except for the brakes. Oh, I didn't mention the rear drum troubles yet...
Thanks. Just used this video to do my '06 Tundra. It went smoothly.
I was always taught to push dirty fluid out the bleeder instead of up and into abs system when compressing pistons on calipers
I've done several brake jobs on more traditional disc brakes. It surprised me a bit that nobody else was using any lube in other videos describing how to change out these Tundra ones. Thanks (I think?) for showing the right way to do it.
Excellent video! Clear, concise, and thourough explanation of the entire process. Thank you so much! I'm tackling this very project in the morning!
Hey! Really helpful video, I got the kit, and I am going to attempt this weekend. Just wanted to give you an update about the Max Advanced Coated kit, I ordered using the link you provided, and my kit came with new hardware metal clips for the pads and pins for the caliper bolts, (not new caliper bolts, just the retaining pins for them).
@@voidscorcher686 thx so much for the update on that kit!
I appreciate it!
Best of luck this weekend.
Take care,
-Dan
Only reason I subscribe to your channel is cause you work on your 1st gen tundra
Thanks for being a subscriber!
Thanks for subscribing, more Tundra videos to come...
Doing a window motor soon.
Take care,
Dan
Excellent video and very clear explanation... Ilike the tool 9000 you used to remove the rotor...
Thank you so much! If not for people like you people like me could not do the job...
Thanks.....more 1st generation Toyota Tundra videos. Again thank you very much.
thank your for this video, the angles so i can see exactly what you are doing are perfect, since its my first time changing the brake pads on my Tundra
First time viewer. Excellent video. (Just bought an 04 Tundra and about to do my brakes for the first time.) Subscribed and liked!
how did it go
I’m going to replace/upgrade my friends rotors. These are really similar to the work I did on my g37 rotors and brake pads. It will be my second time doing so.
Great video. Just a heads up, usually you wanna take a wire brush to the brake pad pins. Then use anti seize on the pins. And far as the metal brake line hose from that c clip you removed it’s easer to remove that entire bracket 12mm socket provides more move ability. It was a good video ,,,,, I’ve seen a couple videos now where the pins are not being wire brushed I had a wired grinder at my work bench so it cleans it in a jippy lol. I work at toyota,,,,,,😁
Thx Damien,
I agree, I think I would do the 12mm bolt on the metal brake line next time, and Yes, those pins really didn’t clean up too well with just the brake cleaner and paper towel. Great advice on the wire wheel on the bench grinder!
Thanks for watching!
Take care,
-Dan the Fix it Man
Damien Bell Hey Damien since you work @ Toyota why my 04 v8 tundra have a much smaller brake reservoir than the one shown here, your input would b appreciated
Dan, I don't own a Tundra, but your videos gonna make me buy one.
Thanks for watching Hamad!
Thanks Dan, very clear instruction. I'm grateful for your help.
Just thought I’d post that the brake line fastener on the steering knuckle is a pain. It uses a weird flared bolt head and nothing I had would grab onto it securely. If you can, have someone hold the caliper to avoid breaking the solid brake line and slap the rotor on real quick.
great video and great job for explain really well. This is video I need to replace my tundra front breaks. Thank you.
I follow your instruction and I did an awesome job. They came out perfect. Thank you Dan.
Hi Benedetto,
Glad to hear you got them done!
Thanks for watching!
-Dan the Fix it Man
I'd never use this much brake grease..................But I will now......thank you.
Thanks for this! Today went super smooth thanks to your video! Much appreciated
Very nicely done, well detailed instructions. Do you have on 2” front lift for 1st generation Tundra. Thank you.
I wish the mechanics do it this way and grease that really nice and clen parts
But No they do it as fastest they can and down o the road making noise slapping jobs and expensive
Thank you so much for sharing. Your video does help me in the replacing process. Please keep it up.
Thank you so much, glad to hear that my video helped you!
Take care,
Dan
Great clear well explained vid Dan !!! Thank You !
Awesome, and the squealers down and outside..❤😊
Thanks for this video. Much appreciated!
I was told that there are two different sizes brake pads ? A 5 inch and a 7 inch? How would you no ?
FYI...on the side of the rotor is a measurement stamped on the minimum width thickness.
I found it's better just to buy new rotors instead of having them turned. The thinner they get...the more chance of warpage...just saying.
Also love the syl glide that anti seize is garbage thick and gets hard like
Great explanation. Thanks
Do you know which year Tundra had the first upgraded bigger calipers?
Any tips or help with the tundra hydro assist VSC system? I want to bleed it but can’t find specific info information
Thanks for the video!!
PLEASE SHOW HOW TO CHANGE THE BRAKE FOR TUNDRA SR5 YRS 2006. THANK YOU!
Hey Dan! Thanks for your vids! How do those Max brakes and rotors perform? I'm thinking of getting the Max kit for my 1st gen 2004 Tundra. Thanks!
Hi RJ,
No problem, I am happy to report that these brakes are working great. I don’t have too many miles on them yet, as it’s not my daily driver anymore, but so far so good.
I did notice a little brake fade as they were getting hot during the initial bedding in process (pretty normal), but now under regular driving conditions, they are working fine and I have no complaints.
Thanks for watching!
Take care,
Dan the Fix it Man
Do you happen to know if 1995-1998 T100 4x4 front brake setup is the same or very similar? Thanks!
COOL! I'm ready 2 Go...
Thank you
You, Sir, just saved me $400
Super helpful
What sized pads ? I have an 02 and the parts store said there is 2 different kinds. Not sure what ones
Great video.very helpful.
Thanks , Awesome video
Awesome video BTW!
Step 1: Disengage the spring BEFORE prying the pads 🙄
Hey Dan what is the benefit to the slotted drilled rotors vs. not?
Hi Ryan,
The idea is that they will cool down quicker and help dissipate the heat.
So far, they seem to be working fine. Haven’t warped yet like the standard ones I have used in the past.
Thanks for watching!
-Dan the Fix it Man
@@DantheFixitMan and that was a year ago right?
Ryan Shield
Yes, it’s been just over a year, but it is an extra vehicle for me, not a daily driver anymore.
@@DantheFixitMan awesome thanks for sharing the wisdom!
Great video thanks
Quick question. Did your new rotors come black or did you paint them?
Hi Mark,
These came with that black coating on them already.
It took a few days for it to burn off, but they stop great - much better than before.
No complaints so far.
Thanks for watching!
-Dan the Fix it Man
@@DantheFixitMan Thank you. Looks like it would help prevent the rusted out look.
Well done!
Did anyone else noticed the top clip fall off OK pretty good video otherwise Thank you
When editing, I cut out a lot of footage to try to keep the videos shorter. I just double checked the truck and the clip is still there installed in place, so what I think happened is I had probably turned that pin so the clip was facing the other direction.
Glad you noticed that though!
Thanks for watching!
-Dan the Fix it Man
Literally watched the entire video in the time it took to get one slide pin out...
Why does my 00 tundra have a different master cylinder
This version of the master cylinder is a hydro boost, notice there is no vacuum booster on the back of it. This one is much more expensive to repair or replace and more difficult to work on than the traditional style that you have. Thanks for watching, -Dan the Fix it Man
@@DantheFixitMan ahhh ok ya i have to change my master and brake booster good video man thanks.
@@mikegman7502 No worries, here’s a video that I made with your style of master cylinder and booster. The master cylinder was leaking into the booster.
th-cam.com/video/V1Q83GDmplY/w-d-xo.html
Good luck with it.
@@DantheFixitMan thank you so much thats exactly what is happening to my truck. Its going to be my weekend project
@@mikegman7502 it’s not too bad, but the third bleeder in the master cylinder threw me off a bit. I was lucky to find those instructions on how to bleed it. I put a screenshot of the instructions in the video.
Take care,
-Dan
Liked and subscribed
Everytime I apply brakes my truck shakes especially at 50 mph or higher
New Rotors and pads should fix that.
@@DantheFixitMan thanks
Mines 2011 Toyota tundra r brakes same
I to
Rotor Remover 9000 (c) LOL :D
Good video but WAY too much grease.
Prying on the outside edge of the pistons are poor practice