The material alone would've paid for several rims, blah blah blah... Thank you for putting the time and showing the full process in all your videos. The patience and workmanship is fantastic!
I really appreciated.. Ignoring the cost ignoring the peoples who makes irrelevant comments... The struggle, professionalism and your hard work towards these kinda of Jobs is much much appreciated.. GOD Bless U.. From Pakistan
Big facts😂😂 if u put the spare on is still uneaven so about 60 miles on it below 55mph 😂😂 did all the work as if it was a custom rim that wassant off balance
It’s not about effort or time or money you put into it. People who are willing to buy new ones definitely don’t have these skills, and will not enjoy or be satisfied after hard handy tasks. Thumb up for u dude!
Very impressive result for what it started out as. Skill, time, and motivation. Very rare combo. I would figure this would take me 30 hours or more to do. Keep it up friend.
All of those effort just for four lugs I can’t imagine how much more to 5 lugs forged wheels and how much you’ll charge I mean it’s perfect restoration without any shorts cuts,amazing ❤️
Thank you for putting in the description that this wheel was not to be used on a vehicle again, as a mechanic it bothered me that you were putting body filler on it, so I stopped, read the description and found I could enjoy this piece of art you have achieved. Subscribed!
What is wrong with putting body filler on the wheel? There seemed to be plenty good metal left, so strength should be fine. Only problem I can potentially see, is that the wheel is susceptible developing leaks. Because of the mating surface between tire and rim having a thin layer of body filler that can break off creating said leak.
Frank Underwood. A wheel has to be perfectly balanced for a car to behave properly and safely on the road. The wheel would be fine but when the filler comes off it will cause the wheel to be out of balance and unsafe. A little vibration at the wheel while magnify through the suspension components and causing premature wear on the suspension and then it's a snow ball effect from there one wards to making the car unroadworthy if not addressed.
Ahh, makes sense. Reminds me of a top gear episode where they eyeballed welding a new set of wheels on the outside of the original wheels. Ended up with the whole rear end failing.
Possibly to help save time when trying to fill pits you could spray a light coat of cheap spray can black over it, when sanding where you see black still needs filler
Thinking about, normally those wheels are painted with really basic powder coating so that's why it rusts so badly and considering what he did (sanding, primer, lacquer and stuff) it may be way more durable than the original coating tbh.
Excellent job, I think for the people who look to complain about the man hours put in the restoration process, its not about the time spent, its about taking on the challenge and showing the viewers here "how to do" and the process of performing some of these restoration projects. Its pretty obvious the person performing these restoration projects has some very exceptional craftsman skills that should be admired. Don't you think if he wanted he would just go out and purchase some of the same products he restores? I had to break this explanation down to Sesame Street level for the people complaining who have completely missed the mark and have not a clue about some of the reasons why "Restore It" performs some of the restoration projects they do, lol!
Meticulous, minimalistic and a comprehensive story without words. Love the environment and working sounds. To my mind you’re a experienced restorer and you know your way around a camera, lighting and editing software. Anyhoooo....a new sub.
The style of your video is very useful. The speechless is fantastic idea. Everyone can see and understand what are you doing from the entire world. Well done.
Buying a brand new wheel would probably be cheaper, but i applaude your awesome work! It turned out really nice, and was probably quite a learningful and satisfying job :)
Excellent. I totally get it. Yeah you can buy a new wheel but it's your project, your baby. And at the end of the day you can say I did that. Great feeling. Keep it up 👍
Curti o trabalho de pintura ficou legal mesmo, agora só não acreditei que esse pneu sempre foi o mesmo no final hahaha E para ficar zero mesmo tirou até as pedrinhas
mas um pneu tão velho como esse não pode ser usado. Já perdeu as características de segurança pra rodagem... imagino que ele tenha feito pelo vídeo e grana que fez, e talvez pra colocar de enfeite na parada
People that say "just buy a new wheel" dont realize this is your job. 62k people watched so far. He probably made enough on this one video to buy 100s of that wheel. Cheap wheel not worth it? Oh but it was. Oh but it was...
Dubber98 exactly what I was thinking. (☞ ͡° ͜ʖ ͡°)☞ TH-cam is a business, and he/she needs to keep making videos whether it be fixing a spare tire or making those awful slime videos
@@broken_font1881 Dude, just as I opened up this thread to read your comment, a first ever commercial appeared, Netflix 😂 ..must have been some glitch in the matrix earlier on
I know I'm late but here's a banger of a tip: when sanding Jack up your car and attach the wheel, stick it in gear and apply medium to light pressure on the paper.
Я под столом! Потратить два дня работы и материалов на пару тыщ, что бы сделать попытку вернуть внешний вид ржавому диску! Который закорозирует в первый же год. И ладно бы покрасил узор какой то, так нет, просто форшмачно облил черный грунт лаком...
Restore It NICE! you had actually applied double layer of primer, I'd tried to restored mine using WD40 and can-sprays only, you are making me ashame of myself... T_T
Beautiful work, and I enjoy watching your restoration projects, but I have to ask myself where do all the toxic glues, V.O.C solvents with nasty fumes and dust particles you create, go to? Down stream and into the atmosphere? Im glad you were a mask.
To avoid wasting precious time increase the speed of the video to x2. Playback speed is found by clicking on the 3 buttons at top right of video. You can also double click the right hand side of video to skip in 10 second increments.
Meu uma roda de Ferro dessa, eu pegava passava um ante ferrugem, passava uma lixa 100, depois lixava com 320, passava West prime e depois jogava um Preto Cadilac PU ia ficar lindo... E não ter todo esse trabalho...
No annoying music, no talking, plenty of info, beautiful shots, masterful work.
The material alone would've paid for several rims, blah blah blah...
Thank you for putting the time and showing the full process in all your videos. The patience and workmanship is fantastic!
no garbage speech.... no stupid music... just real hard work and simple editing which is awesome. please make more videos like this. thank you.
Yes right
And a cute cat 9:50
I really appreciated.. Ignoring the cost ignoring the peoples who makes irrelevant comments... The struggle, professionalism and your hard work towards these kinda of Jobs is much much appreciated.. GOD Bless U.. From Pakistan
Yousuf Zafar thank you Yousuf. I really appreciate this comment!
You just did 300 bucks worth of work on a 20 dollar wheel. Subscribed.
Kurosaki990Ichigo
Perfect repair man !
Kurosaki990Ichigo IT WAS SENTIMENTAL!!! 😂
Big facts😂😂 if u put the spare on is still uneaven so about 60 miles on it below 55mph 😂😂 did all the work as if it was a custom rim that wassant off balance
Imagine doing all this work and then boom bsck to trunk to sit for a good year of no needing a spare😂😂 gunna need another restoration
شششش شششش شششش امیرمحمم
It’s not about effort or time or money you put into it. People who are willing to buy new ones definitely don’t have these skills, and will not enjoy or be satisfied after hard handy tasks. Thumb up for u dude!
Very impressive result for what it started out as. Skill, time, and motivation. Very rare combo. I would figure this would take me 30 hours or more to do. Keep it up friend.
All of those effort just for four lugs I can’t imagine how much more to 5 lugs forged wheels and how much you’ll charge I mean it’s perfect restoration without any shorts cuts,amazing ❤️
Thank you for putting in the description that this wheel was not to be used on a vehicle again, as a mechanic it bothered me that you were putting body filler on it, so I stopped, read the description and found I could enjoy this piece of art you have achieved. Subscribed!
As a tire tech that bothered me to but now that I know it’s an art piece I can relax about it haha
What is wrong with putting body filler on the wheel? There seemed to be plenty good metal left, so strength should be fine. Only problem I can potentially see, is that the wheel is susceptible developing leaks. Because of the mating surface between tire and rim having a thin layer of body filler that can break off creating said leak.
Frank Underwood. A wheel has to be perfectly balanced for a car to behave properly and safely on the road. The wheel would be fine but when the filler comes off it will cause the wheel to be out of balance and unsafe. A little vibration at the wheel while magnify through the suspension components and causing premature wear on the suspension and then it's a snow ball effect from there one wards to making the car unroadworthy if not addressed.
Ahh, makes sense. Reminds me of a top gear episode where they eyeballed welding a new set of wheels on the outside of the original wheels. Ended up with the whole rear end failing.
I was in the same boat as you. I was like NO! NO BODY FILLER ON RIMS! ARE YOU NUTS!? It is unfortunate that this is still one for the "art" bin.
Possibly to help save time when trying to fill pits you could spray a light coat of cheap spray can black over it, when sanding where you see black still needs filler
Thinking about, normally those wheels are painted with really basic powder coating so that's why it rusts so badly and considering what he did (sanding, primer, lacquer and stuff) it may be way more durable than the original coating tbh.
Excellent job, I think for the people who look to complain about the man hours put in the restoration process, its not about the time spent, its about taking on the challenge and showing the viewers here "how to do" and the process of performing some of these restoration projects. Its pretty obvious the person performing these restoration projects has some very exceptional craftsman skills that should be admired. Don't you think if he wanted he would just go out and purchase some of the same products he restores? I had to break this explanation down to Sesame Street level for the people complaining who have completely missed the mark and have not a clue about some of the reasons why "Restore It" performs some of the restoration projects they do, lol!
Meticulous, minimalistic and a comprehensive story without words. Love the environment and working sounds. To my mind you’re a experienced restorer and you know your way around a camera, lighting and editing software. Anyhoooo....a new sub.
The style of your video is very useful.
The speechless is fantastic idea.
Everyone can see and understand what are you doing from the entire world. Well done.
Buying a brand new wheel would probably be cheaper, but i applaude your awesome work! It turned out really nice, and was probably quite a learningful and satisfying job :)
Buying lol
Your patience skill is stronger than anything in this cruel world )
How about restoring that cat?
I think a "cat restoration" where you just give them a good brushing would be a fantastic video :)
DjJenix ROFL. Youre the best!
good comment
Buy new one cat! lol
Guess, that you can't do that with a spraygun.
I respect your enthusiasm in the job you’ve set your mind on.
Proper job! I have 4 of these to do on an old Toyota, cheers for showing me how!
SUPER!! DOLBOEB!!!
It is better to buy a NEW !! So much money and effort !!
Awesome job man! People that “get it” get it. People that don’t never will. Keep up the great work and videos. 👍🏼
I would replace the rubber tire, since that one is 13 years old dated 2005. Awesome Video!
Thumbs up for the cat too! No job is complete without a furry supervisor!
Great job on the resto!
IT GIVES ME ALOT OF JOY WHEN YOU COMPLETE ANOTHER PART FOR THE BEAMER BRO KEEP IT UP!!!!!
Mind blown!!! we just discovered a new disorder ...Obsessive junk restoration disorder! keep up the good work!!!
Ok
حلوووو
Lol that's an interesting disorder
This is a great presentation for anyone owns a rusty classic Ferrari
People who are negative don’t get the point of “restoration” excellent work
Not going to lie, the cat at the end of the video sunbathing ended it off nice. The wheel and tire look amazing.
This was a fun watch. Love seeing old discarded things given life again. Subscribed!
Complimenti per la tua professionalità e tanta pasienza😀👏
I really love restaoration videos. More please. I watch every second.
Just get them sandblasted, easier and cheaper than days cleaning, filling, sanding and prepping that rusty wheel!
This is a brilliant idea for a channel! You’ll have 100,000 subscribers in no time. Keep it up!
Austin Buck makina
Excellent. I totally get it. Yeah you can buy a new wheel but it's your project, your baby. And at the end of the day you can say I did that. Great feeling. Keep it up 👍
Тот случай, когда сам процесс приносит удовольствие! Мастер своего дела 😀
Here you have the job for just one wheel...salute dude!
Понятно что это нецелесообразно, но процесс увлекательный, спасибо !)
algorythrm reminding me of this, brilliant work i have my escorts little 13 inch steelies off ready for clean and repaint
Шпаклёвка дороже чем диск ,краска ,работа.что за необходимость.
Может просто спортивный интерес + куча свободного времени
3.2 млн просмотров
Чтоб впарить это говно подороже!!!
А-ху-еть, столько свободного времени я еще не видел.
Пошел диск купил за 500_700 рублей и вуаля.))
I’ve got 4 rusty e30 original hub cap wheels, might give this a try one day
This was good. Reminds me of a movie I endured about a tire that could make things explode with its "mind".
Strangest 1 and a half hours of my life
What??? A movie about a tire that can blow things up with telepathy??? Did I read that right ???
That movie was weird but very interesting to watch.
J. Hunto's Garage I WATCHED THAT MOVIE
Yep that movie is messed up!!
Beautiful！
GJ👍
Curti o trabalho de pintura ficou legal mesmo, agora só não acreditei que esse pneu sempre foi o mesmo no final hahaha
E para ficar zero mesmo tirou até as pedrinhas
mas um pneu tão velho como esse não pode ser usado. Já perdeu as características de segurança pra rodagem... imagino que ele tenha feito pelo vídeo e grana que fez, e talvez pra colocar de enfeite na parada
Nice work. Gonna suggest maybe trying a silicone spatula to apply the bondo.
Subscribed! The crispy 60fps quality is very nice! What camera is used?
I'm glad you kept the near new Pirelli...Nice to see Kitty supervising.
This channel needs 10x the amount of subscribers. Well planned out videos with a lot of details.
Great informative video. Even though some of the methods are beyond my skill level, I feel can still do this .
As you can see, the most important part of the job is proper cat placement.
Good
I said no, it's too far gone. Well, slow clap and standing ovation for you sir
Smiles the entire video. Nice job.
People that say "just buy a new wheel" dont realize this is your job. 62k people watched so far. He probably made enough on this one video to buy 100s of that wheel. Cheap wheel not worth it? Oh but it was. Oh but it was...
Dubber98 exactly what I was thinking. (☞ ͡° ͜ʖ ͡°)☞ TH-cam is a business, and he/she needs to keep making videos whether it be fixing a spare tire or making those awful slime videos
I'm not quite sure he's monetizing his vids, I have yet to see 1 ad
Ghassan Al Farra dude there literally was an "Airheads" commercial on this very video just as I opened this video to reply to your comment 🙄
@@broken_font1881 Dude, just as I opened up this thread to read your comment, a first ever commercial appeared, Netflix 😂 ..must have been some glitch in the matrix earlier on
Hit the nail on the head Dubber! Thanks for this comment man. It’s good to know there are people like you out there :)
Looks great and gold air. I would totally use it as a spare lol.
Amazing result, great restoration!!.
I know I'm late but here's a banger of a tip:
when sanding Jack up your car and attach the wheel, stick it in gear and apply medium to light pressure on the paper.
Good job. Very satisfying.
Salute from Malaysia 🇲🇾
Отлично, респект человеку который может и показывает что это возможно сделать было бы желание!
10:00 the quality inspector 😂😂😂
the Cat* is the most responsabilty Quality Control 😊
Good work, my congratulations, my friend. I appreciate your content. Greetings from Brazil.
I do not know what you would want to refurbish a steel wheel. But this is quite satisfying to watch. hahah
For Old-timer restos this is most likely the only way to go mate.
Very good job!! Congratulations from Brazil!!
I see reason in your madness :) Keep them coming. Subscribed!
Awesome job, that spare looks like a Porsche spare or an Alfa Romeo spare,👍👍👍👍👍👌👌👌👌👌
Я под столом! Потратить два дня работы и материалов на пару тыщ, что бы сделать попытку вернуть внешний вид ржавому диску! Который закорозирует в первый же год. И ладно бы покрасил узор какой то, так нет, просто форшмачно облил черный грунт лаком...
Perfect repair for an old 2005 tyre. Awesome, it´s new attending to the thread, but it is like a stone.
I think you put more work into that rim than the company that made it!
Restore It NICE! you had actually applied double layer of primer, I'd tried to restored mine using WD40 and can-sprays only, you are making me ashame of myself... T_T
Excellent work and very entertaining... and I think I may have spotted the Beemer at 10.26 😊
Solid work! Earned a sub.
Looks brand new!
Выгодное дело! 2 дня потратил,вложений на 40 $ . Получил 4 лям. просмотров это примерно 2000 $ . Теперь можно и машину купить. Молодец! Лайк!
И машину так же пескоструйка шпатлевка и уже 10 лям просмотров и уже можно остров купить и т д
Nice restoration of a Porsche spare tire,👍👍👍👍👍👌👌👌👌👌👌
anyone else anxiously waiting for the cat to strike the green cloth?
Why is this so satisfying?!
Молодец конечно но зачем так заморачиваться оно того не стоит !) А так мегалайк и респект)
Beautiful work, and I enjoy watching your restoration projects, but I have to ask myself where do all the toxic glues, V.O.C solvents with nasty fumes and dust particles you create, go to? Down stream and into the atmosphere? Im glad you were a mask.
The cats like aww jeez another one..he at it again..silly human😂😂😂
Well, it would have to be an incredibly rare and valuable wheel to deserve a thousand-dollar rehab...
Keep making videos they are great.
supet
very good job, now make a clock out of it, i got two rims to do i will follow your tips
Good job, perfect restoration.
Your a beast bro .. this was a crazy ass transformation 👌
É muita mão de obra para recuperar um aro comum que se adquire no mercado na faixa de R$50,00
Now that was so Satisfying to watch great work man 👍
Damn bro, nice job
Great restoration work.
Thanks scott!
Новый диск дешевле купить чем его восстанавливать.
Нахер его шпаклевать было?
Особенно внутри
@@Engineer_abc ну это чисто эстетика
Точно
Попробуйте купить новый диск - ровный! Я попробовал и не нашёл.купил бу оригинал и оказались ровные!
I am speechless...Subscribed.
Gawd damn satisfying
To avoid wasting precious time increase the speed of the video to x2. Playback speed is found by clicking on the 3 buttons at top right of video. You can also double click the right hand side of video to skip in 10 second increments.
*Русские есть?*
*Реставрация покрышки? Вот веселье)*
Инструмент F.I.T. *Ок я понял)*
я хуею)))
Pirelli))
теперь я видел всё!!!
Ненормальный
i love the cat watching you
very nice job. pls post more
This was oddly satisfying
Это тренировка силы воли мастера ! Респект !
Beautiful as usual!
My favorite part of the video was hands down...
the cat =^-^=
Very nice work!
Ficou top, quem for brasileiro é estiver assistindo esse vídeo curte aqui 👇 🇧🇷
Eu assisti mas não sei se sou Brasileiro kkkk
Vale a pena todo esse trabalho?
@@ranierymotovlog acredito que seja para demostrar que é possível recuperar, se fosse uma roda rara por exemplo.
@@garagemdoraphael9397 verdade..
Meu uma roda de Ferro dessa, eu pegava passava um ante ferrugem, passava uma lixa 100, depois lixava com 320, passava West prime e depois jogava um Preto Cadilac PU ia ficar lindo... E não ter todo esse trabalho...
Excellent job
Thanks, Morgan!