Restoration Of Rusty Bench Grinder Makita 9300
ฝัง
- เผยแพร่เมื่อ 17 พ.ย. 2023
- I just found an old bench grinder that no longer works. It is manufactured by the Japanese brand Makita, model makita 9300. It is in a jammed condition and completely rusted. In the video I will remove rust, paint and replace a few broken parts.
* Bench grinder Information *
- Brand: Makita
- Model: 9300
- VOLTS: 100V
- Frequency 50/60 Hz
- Wheel size: 125mm
- Shaft: 12,7 mm
- No load speed: 3600R/min
- Overall length: 278mm
- Net Weight : 12kg
I'm very happy to receive your feedback, advice, suggestions to improve myself.
-------------------------
Like and subscribe to support the channel ^^
Thank you so much for watching !!
Have a nice day ^^
#restoration #restorationvideos #restore #repairwork #makita9300 #benchgrinde - วิทยาศาสตร์และเทคโนโลยี
I still have the bench grinder my great grandfather pulled out of an old tractor factory back in the 50s. It dated back to WWII when the factory built equipment for the war. It has roller bearings that can be greased. It still works great. I made an adapter so it can run all sorts of hand built machines
That would be great, if only I could see them
@@hbrestoration
😅😅😅😅😂
I know they are not cheap, but a small sandblester sure would do the trick for you, well done sir, I have seen several of these restored and I gotta say the hammer finish paint looks the best.
Thank youuu^^
@@hbrestoration Was going to say the same thing.
Så bra!
Detta kan man inte kalla för "Slit och släng" 👍👍👍
a restoration video without any sandblasting?!?!?!? unheard of! but really, it came out nice. i enjoyed watching it.
thank youu ^^ have a nice day
Pretty darn cool!!!!
❤️❤️❤️
Pretty good for not having a blast cabinet!
😅
Quality machine, beautiful.
Thank you
Todo un arte esta restauración paciencia e ingenio 🤔
♥♥♥ thank bro
Wow! The video shows a negative test for connecting the grinder to the electrical network. A moment later after disassembly, the burnt stator winding can be seen. But it was enough to disassemble the sander, remove the rust and apply a new coating.
But to our credit, the overhaul also included the use of a power cord with a protective conductor and grounding the frame of the grinder.
Gostei parabens 👍
😍
Very nice restoration. Good work. But...never use the side of the grinding wheel. It can explode on you! Always just use the front of the wheel. That's what is is designed for.
I will be more careful when using it
@@hbrestoration Bro, I accidentally came across your video with the Makita perforator, I decided to watch a newer video:
at 19:30 you can see rusty insides, it's a little sad;
buy yourself a couple of clamps, we have such a phrase: "a well-fixed patient does not need anesthesia";
it would be nice to try to make a homemade press based on a jack and an iron profile, it will help you, you can buy an inexpensive set of press kit;
you have grown a lot in terms of restoration over these six months, you will succeed. "there is no limit to perfection", good luck to you in everything 😊❤
Thank you for your comment, I will try to do better, I'm glad you took the time to watch it
Very nice restoration. Good video.👍👍👍👍👍
thank youuu^^
Use a sandblaster to clean off the rust. Much more satisfying to watch. And you will be eating a lot less rust dust.
yep eat less dust 😂 I will equip it
Very useful machine, but it can turn into a killer machine in a matter of seconds.
Something like an angle grinder.
why? I do not understand
toutes mes fellations pour ce magnifique travail de restauration. 👏🏼👏🏼
♥♥♥
Your work is always great 👍👍
Thank you ^^
Yo, No gloves around rotating machinery! Loose the gloves or loose a finger, ESPECIALLY around that wire wheel. - And don't believe the BS abut the "ripaway" gloves. The only thing they are good about ripping away is the skin on your hand. - It's better to have a couple stitches in your thumb, then to have no thumb to get stitches in.
Other then that outstanding work. - The guy that called you about plughing it in is off base. - How you going to know if it works? You were in zero point no danger there. - Personally, I would have stuck an ohm meter on the windings, but that is because I'm lazy and would want to know it was going to work before I got too far into it.
Once again, damn good work. - Just watch the gloves (And I highly recommend glasses, but that is up to you. )
Thank you very much for your comment, I will pay more attention to the glove
Very well done looks better than nee had class very functional
Thank youu☺️
What an inspiring piece of content!
thank you^^
Parabéns amigo seria bom que as pessoas restalrace as coisas como você faz 😅😊
Thank youuu
Buenas noche hermano excelente la restauración gracias por en señal saludo y muchas bendiciones desde Venezuela Ali Molina 🙏
❤️❤️❤️ thank youuu
label must be change but good work
thank you ❤️❤️❤️
Tenes que comprarte un arenador asi limpias mas rapido
Great video, Very nice restoration. Good job.
🥰
Thank
I'm guilty of using gasoline to degrease and clean with. But do be careful, gasoline has such a low evaporation point, that it doesn't take long for the fumes to spread out.
I had to use gasoline to start a fire in a grill that someone melted plastic over. I didn't have anything else. And was shocked to see how far the fumes had spread when I lit it up.
That's dangerous, be careful with it
This bench grinder is from the 1960's... just look at the date on the motor capacitor - it says 1967 at 8:07 in this video...
Really feel good to see these videos no doubt 👍👍🙂🙂but how it's possible they don't talk even single word through out their work and a person who shoots up the whole video... hard to believe 🤔🤔🤔
Thank bro very much ^^I was very happy when I read it ♥♥
Great job. Well done.
thank bro ^^
Very good job brother and I have enjoyed the video.
thank you ^^ have a nice day
J’adore vos vidéos c'est vraiment super et très impressionnant, je pense que ça doit leurs faire plaisir une nouvelle vie ❤
Thank you ❤️❤️❤️
@hbชชชrestoration
Освежил😂🎉❤🎉
❤️❤️❤️
Muito bom!ficou top...
Thank you❤️❤️❤️
It's amazing to turn something dead into life again
Thank bro ❤️❤️❤️
Ржавчину надо убирать полностью. После этого- грунтовать. Потом красить.
Why didn't you disassemble the shaft lock? Or pull the windings out for cleaning?
The shaft lock part is not rusted or damaged, it just stays there better
Great Job. You really. Are a Highly skilled Technician/Restorer.
Thank youu^^
Use a spray paint trigger nozzle adapter (shaped like a gun). It's easier on your hand\fingers & better posture cause of the shape.
thank youuu
Браво!
♥
A piaskowanie nie łaskę by piaskować zamiast szlifować byle czym ładnie jest to zrobione ale trzeba to fachowo jej robić Pozdrawiam serdecznie. 👍👍👍👍👍
yes, thank you 🥰 i also want it to be easier, it is very necessary
Зато какое, удовольствие. Делать своими руками. 😊😊😊😊😊
Качественный станок, работа красивая. Спасибо.
Где вы достали этот станок, а то сейчас продают не понятно что.
Thank you ❤️❤️❤️
Favorite channel of my subscription 😅
Thank you very much🥰🥰🥰
Overall, great restoration, however, I do wish you'd made a new label.
Кость, а что пустых мого. Как то не так неправильно. Здоровья тебе семье. Счастья и удачи. Главное удачи в рыбалке. Что-то последнее время не очень.
🥰
Well done my friend from, Bayamo, Cuba
Thank you ^^ have a nice day ♥
great
♥♥
Конечно красавчик, но провода можно было припаять, и термоусадку феном обжать.
😅Спасибо. В следующих видео постараюсь сделать лучше
@@hbrestoration да и так всё хорошо, просто когда такой капитальный ремонт, такая мелочь как скрутка проводов портит вид🙂
Да, я их экипирую, потому что обычно я делаю то же самое.@@Kuper90
👍👍👍👍👍😋😋😋 С наступающим вас новым годом!!! 🎉🎉🎉🎉🎉🎁🎁🎁
♥♥♥♥ merry christmas
Motor bearings should be checked.
This grinder sounds like they should be replaced or examined / greased.
All parts need to be treated with a rust binder, soon the piece of metal will turn brown again
Originally it wasn't even painted, that's why it rusted so much
Ốc PH3 mà bạn sử dụng mũi vít PH2 nên làm hư ốc vít
Would it not have been better and easier to have used a sand blaster on all of the metal parts to clean them?
yep, I don't have it right now, I'm using what I have. In the future I will buy it
Moedor de bancada restaurada 😉
Thank you ^^ have a nice day
❤
❤️❤️❤️
Ок
❤❤❤❤❤❤
have nice day ♥♥♥
@@hbrestoration 🙏🙏🙏🌹🌹
You increased the cleaning speed of the rust with gasoline!
Great restoration, but the noises from the rubber gloves are really annoying. It's best to use different gloves, as can be seen in other videos. Where is the sandblasting?🙃
I purchased one of these grinders and was wondering if you have any spare accessories or have a source for any. Thanks
You can find them at Japanese second-hand stores
I am in USA, do you have links to some stores@@hbrestoration
What about the water inthe stator winding.
Must dry before assembly
Why would you ground up a bench?
买台喷砂除锈机很难吗？
我来装备😅
15:23it is forbidden to work with an electric sharpener in gloves
😰
Just use an electric drill to unscrew it, much faster & stronger
I know that, I use my hands to make it less noisy
Restaurer un touret a meuler
♥♥♥
Parabéns 👏👏
❤️❤️❤️
You have no idea of the condition of the stator as you never tested it. I'd be leery about how long it will last.
👍💪
❤️
На троечку.
Eu colo il zio in un
Why do you paint your potted plants?
😅
It is dangerous that you plug in such an old thing. Don't do that, we all understand it is dead)
Thank you 🥰🥰🥰, I will be more careful
Si la tensión y la frecuencia es la correcta o a través de un transformador se puede conseguir la tensión correcta. Fijate que tiene la placa de fábrica. No te das cuenta que los que restauramos no solo somos aficionados, somos tecnos en electromecánica. Los que os quedáis pegados sois vosotros
Fatevi I cazzi vostri. Al massimo salta l'automatismo. Sapientoni
Pppppp@@hbrestoration
@@delaMontanaCimas👌👌👌👌
Meep
^^
🖐️🖐️Hi sir😊😊.From India❤
🥰🥰🥰 hi bro
@@hbrestoration can you give away an rc drill machine to your subscriber sir?😊😊
We are too far away for transportation
@@hbrestoration can we pay for that transportation sir😊😊.
You painted most of the rusty parts.
What is the name of your spray??..
Its name is wd40
Тяп-ляп...по ржавчине задул краской
Немного ржавчины еще осталось
I don't see the point to install the ground wire to the grinder base if there is no ground terminal on the plug... Unless I'm missing something.... Otherwise i give you a B- for the effort.....
Please show us your video!
👌
You painted over a lot of rust…
😂ธนา
🥲
А откуда он знал,что двигатель не сгорел,вень он его в ролике не прозванивать,а ротор судя по всему заклинило?Потом подшипники надо было не закрытые ставить,вдруг там смазка высохла или ее там мало-лучше самому набить.
Exactly
@@user-hs8bl6ew9r Не знаю, сломается он или нет, но если двигатель сломается, вы продолжите смотреть видео по его ремонту.
Ржавчина не счищенная, но уже нанёс грунт. Это халтура.
Такой же станок на котором ты чистил. Также покрашен. Грязь кругом. И ты ждёшь подписчиков?
Ну жди.
Спасибо за ваши Коментарии. В следующих видео постараюсь сделать лучше
Я буду стараться, пока ты не зарегистрируешься😅
🤮👏👍🍾
❤️
Та пилять, где вы их так засрать умудряетесь?
I used google translate but I don't understand what you are saying 🥲
🥰🥰🥰 hello my friend
@@hbrestoration im the first one
Coitada da planta recebendo jato de tinta atrás ka ka ka e tudo muito mal feito 👎👎👎👎
🎉🎉🎉🎉🎉🎉
Have a nice day
No sandblasting.
I'm not interested.
🥲
👏👍👏👍👏👍👏👍👏👍👏👍👏👍👏👍🥃🥃🥃
❤️❤️❤️❤️
You are wearing GLOVES operating a bench grinder?? What happens to fingers, hand, even your arm if that bench grinder grabs your gloves. Good buy body parts. Dumb move!!!😢
it is a rubber glove, if it were a cloth glove it might be dangerous
If you have seen ANY other restoration videos before this one, you would know that it doesn’t take much to destroy the gloves, so the worst thing to happen would be fingerless gloves in about two minutes.
@@hbrestorationman I couldn't attempt to do videos like yours simply for comments like this guys lol
You do not need those black gloves. Ruins the video
Rust left in most holes - rust left in the bottom - no primer used - banging with a steel hammer on new paint - the electric motor was never disassembled and properly restored - shady electrical wiring - no research to find a new type/serial no plate... So I'm not impressed at all by this poorly "restoration" 👎🏻👎🏻👎🏻👎🏻
Talk to me about those screwdrivers you have
I use the Asaki screwdriver brand
@@hbrestoration thank you. They look pretty stout... The shank looks real solid. Are they through handle?