Restoration Of Electric Circular Saw Makita 5800N-A
ฝัง
- เผยแพร่เมื่อ 20 เม.ย. 2023
- I found this electric circular saw from Japan recycle shop. It was made in Japan by Makita, model Makita 5800N-A. I'm very happy to receive your feedback, advice, suggestions to improve myself.
--------------------------
Like and subscribe to support the channel ^^
Thank you so much for watching !!
Have a nice day ^^
#restoration #restorationvideos #restore #makita5800NA #restoration tools #rustremoval #disassemble #repairwork # - วิทยาศาสตร์และเทคโนโลยี
you are very talented
❤️ thank you
My friend, the stuck screws and bolts should be started with a hand screw driver. If you can press hard into it and break it loose, you can pull them out with the electric screwdriver after. Much less headache.
many thank my friend ^^
@@hbrestoration xqx1 q
Also, not many people realise the benefit of a few sharp taps on the screwdriver handle before trying to undo the screw.
L
I tried and it still doesn't work 😪
Anh HB Restoration nhé . Anh sữa máy bằng điện hay qúa❤❤❤❤
Thank you very much 🥰🥰🥰
@@hbrestoration ok anh nhé❤💋🌹
As I can certainly appreciate the restoration job on this saw this guy made so much extra work for him self and it seemed he cut a lot of corners
Thank you for watching the video and commenting. actually i have more difficulty as shown in the video. a lot of scenes were omitted when editing the video
Siempre me resulta agradable ver gente que no tiene miedo de ensuciar sus manos, es la mejor forma de tener el control del trabajo. Felicidades desde argentina. PD por la carcasa de aluminio anterior a la doble aislación, le calculo entre 45/50 años a la máquina
Thank you so much 🥰🥰🥰
@@hbrestoration
how much does it cost to repair work like in this Video ?
good job, well done.
Thank you 🥰🥰🥰 have a nice day
great restauration, amazing video!
Thank you 😊
Es todo un reto tenaz y obsesionarse de estos mecanicos restauradores de herramientas reliquias...increible👍👍👍
thnak you ♥♥♥ have a nice day
My hats off on all that
♥♥♥♥
"Very good" "Thank you" From Thailand 12 january 2024
Thank you ^^ ♥
One would have guessed by the third broken skrew you would chage your approach, but i guess the power tools have their seductive ways.
Thanks you, have a nice day ^
Great job.
❤️❤️❤️ thank you
Nice,i have metabo circular saw and hitachi wood planer,now i want to make restoration for them.
I hope you finish it soon😊😊😊 have a nice day
Marita. Animalitl
Amazing
Best work...
Thank you 🥰🥰🥰🥰
Some wd-40 or pb blaster might have helped you. And no impact driver.
hi, when was the makita saw manufactured?
it is produced in Japan
Maybe I missed it but the badly worn contact end of the commutator should have been machined. The brushes will not make a good sustainable contact and will wear quickly.
Класс! Но коллектор ротора хорошо было бы проточить на токарном станке или хотя бы напильником выровнять а потом наждачной бумагой.
Спасибо за ваш комментарий. В следующих видео постараюсь сделать лучше. хорошего дня
Там протачивать уже нечего. Только замена.
Alternative title: Disassembly and Assembly with some cleaning and painting.
I'll try to do better in the following video 🥲
Restauro uma Serra circular e trocou somente o que havia de estar danificado, muito Bom!
thank you ^^ have a nice day
There's a difference between a restoration an cleaning and spray painting.
What type am I?
@@hbrestoration more of one level up from a bodger
@@delboytrotter7902 I'm not a pro, I'll try to do better in the next videos, thanks for watching and commenting
@@hbrestorationthis hurt my heart to read you’re doing great friend I love your content keep it coming and I’ll keep watching
thank you very much ^^@@JGamer-yz1ot
Bravo
thank youuu♥
good job I like how do fix everything
Thank you ♥ have a nice day
good job bro
Thanks my friend 🥰🥰🥰
Diese Restauration ist sehr stümperhaft durchgeführt worden
🥲
and the last question is how do you do everything so perfectly
Owww. Thanks you! I try to improve every day. i'm just a newbie, need to improve more
Adóro éssas séries 👏👏👏👏👍👍🇧🇷🇧🇷
🥰🥰🥰🥰 thank my friend ^^
Muito bom! Parabéns pelo trabalho
Thank you 😊😊😊 have a nice day
where do you find all these devices
I bought it at Japanese recycling stores. There are many different types of machines
Nice 👍
❤️❤️❤️
Good job 👍
🥰🥰🥰 thanks
amazing
I wish you 5000 subscribers
Many thank 🥰🥰🥰
next grinder
🥰
👌
Thank my friend ^^
2:40 រោលភ្លើង ប្រហែលចេញតាមសំរួល
Thanks my friend ^^ I think this is a great idea
Awesome
Thank youuu🥰🥰🥰
14:52 коллектор износ 100%
Удачи тебе, может быть у тебя когда то все получится 😁🤝
Thank you ^^
I can see you are very much influenced by the ”Gear Show" TH-cam channel.
But he's far superior.
You are great, I also learned a lot. Thank you for watching and commenting ^^
4:38 часть старых винтов осталась в отверстиях.
Якорь надо было менять. Или перепаивать коллектор. Он полностью изношен.
Yepp, thank you for your comment, I will try to do better in the next videos
This was painful to watch! The finished product sounded like something I would throw away.
Thank you for watching, I will try to do better in the next videos
5:30 អ្នកគួរតែប្រើផ្លែទួណឺវីសថ្មីសំរាប់ដោយវា
You need a sanding machine
I equip it
24:16 посадочное место раздолбано, диск будет "гулять".
FICOU NOVA OUTRA VES
nên xài biến áp để k bị hư cổ góp vì mấy cái mạch hạ áp vớ vẫn đó nhanh hư máy
nó thực sự không ổn định, tôi đã thay bằng máy biến áp
Нужно быть гением, чтобы сначала раздрочить шлицы болтов шуруповёртом, а потом поотламывать вообще, оставив огрызки в резьбе. Сам создал проблему и сам её героически преодолел...
Can you do it better?
@@hbrestoration вручную открутилось бы, в крайнем случае погреть и отвёрткой выкрутить.
I've tried all the methods but it doesn't work :(((
@@hbrestorationso bad...
Not satisfactory need improvements... don't give up keeping grinding ur almost there... hard work pays off ..
I will try to do better in the following videos
Где руку порезать успел? Осторожно надо работать.
me parece raro que los tornillos oxidados salgan muy facil. esto custa mucho sacarlos
In fact, it's not easy at all. It's very difficult to open it
As you can see where the brushes rest, the collector is deformed and will not make good contact, it is no longer useful
Thank you for watching the video and commenting😊
👏👍👏👍👏👍👏👍👏👍👏👍👏👍🥃🥃🥃
❤️❤️❤️❤️
Да кто же закисшие болты шуруповертом крутит? заберите у него инструмент, пока на покалечился.
Пробовал отверткой, но не получилось, в следующих видео сделаю лучше.
Should have used a new blade.
😅
👏👏👏👏👏👏💯💯💯💯👍👌🇧🇷🇧🇷
Thank you❤️❤️
The blade is not sharp, you need to replace it.
It's just rusted and the blade is still usable, so I decided against it, but it seems like replacing it would be better
FICOU 0 KL
Thanks my friend 🥰🥰
Пайка безобразная, термоусадочную трубку осаживают не так, клемма обжата слабо, нужно специальным инструментом.
0:58 いきなりやっちまったなぁー😱 ここから何本かのボルトは交換を強いられる事に。
10:14 日本語満載の銘板。見たところ1987年製…30年以上は経過している。
13:37 ブレード磨くんかいっ！表面ボコボコじゃないか!!😱
14:45 ベアリングは全数交換。
24:07 なのにブレードはお古のまま。せめて新品をおごって欲しかったですね。
24:34 銘板もコピーせずに元々のを取り付け。ただしロゴステッカーは作り直しているのだが。
Wow looks like the hardware on this thing was the worst.
yeppp it was rusted a lot 🥲
ㅇ
Видео - полное ФУФЛО!
Один "отреставрированный" коллектор ротора чего стоит! Наверное и щетки старые "восстановил"...
Неплохо бы еще научиться правильно напрессовывать подшипники...😢😅😂
🤣Куплю к нему другой подшипник
Фигня, коллектор не поменял, детали по ржавчине покрасил, диск старый оставил. Долго не проходит.
雑
🥰
Schuster bleib bei Deinen Leistungen 👎