Yeah I know, local store keeps hornady buckshot in stock. I haven’t bought any because I plan on getting a .35 cal mold soon. The Lee 000 buckshot mold is .360 cal.
I'm excited to see more experiments in the 835. My only issue with mine is that I have to choose the perfect powder for lighter loads(under 1.50 oz) or else I don't get a good burn, and wind up dumping unburned powder out of my barrel. The lower pressures of the larger bore are a blessing and a curse, and it doesn't help that my barrel is ported... and so are my chokes...
The first run HS hulls do have the square around the AA, I have several hundred of the original production HS from like 2004. They look just like the compression formed hulls but shinier, and they have the separate basewad.
Thanks man. I’ve never used beard oil lol my wife has a hair drier that’s a brush at the same time and I use it to basically straighten my beard after I shower.
Your thumbnail showed an 18 pellet 000, twice the normal load. Did not see it in the video. Came here for the 18 pellet triple aught. I appreciate details like the nose taper for reliable feeding. Pruno
I may need to try this load. I have some hornady OOO on hand to see how it does. I havent had much luck so far finding s load that will do what i want. Ive tried blue dot, red dot and longshot, all with the cb1138 wad with and without filler and OO buck and AA gray hull. Im patterning at 15 yards and my goal is roughly a 6 inch cluster which i have not been able to obtain thus far. Dont get me wrong, all the loads ive made have kept the pellets in the torso and would work. Perhaps these combinations and my rem 1100 with 22 inch slug barrel do not like.
Slug barrel? As in rifled? If it’s a smoothbore with a cylinder bore choke the only way you’re gonna get really tight patterns is by switching to .31 cal or smaller and using steel shot wads. Those pattern like federal flitecontrol buckshot. Loading shells like this and using a cylinder bore choke is only good for about 20 yards before the pattern starts to get really wide. If it’s a rifled barrel, buckshot will never pattern good.
@@theshotgunscientists its a smoothbore open cylinder as far as i know. No markings on the barrel stating otherwise. Time for more experimenting i guess.
Hey, new Shotshell loader. I have learned a ton from your channel. Most appreciated! Just curious tho, the .35 cal. You used, were they coated? Curious if powder coating would make them too large. Thank for any help!
I was hoping you could help me out a little bit. I plan to reload steel shot for waterfowl hunting. My dad has the machine and some shot but he doesn’t have any wads or powder. His machine is set up with bottles on the top and is set up for an ounce and 5/8 powder charge. What would be the best wads for that? It would be 3 inch shells of whatever brand shells I find, rio, Winchester, fiocchi, Kent, and any other brands I find. And what is the closest powder to Winchester 571. It’s what he used to use.
1 5/8 ounce of steel will barely fit in 3.5” 12 gauge man. It’s typically what’s loaded in 10 gauge. You’ll have to drop down to 1 1/4 to 1 3/8 ounces at the most. Blue dot or Alliant steel are the powders you need. As for 571, hodgdon hs7 replaced it years ago. Same powder, but hs7 was recently discontinued as well and as of right now no replacement exists.
Hey Heavy Load Guy , Great Video and Great Info . I know you said where you got that Taper die , but could you tell me again , Old Age Syndrome , but please tell me again, just for Old Time Sake ! Take Care and Be Safe
Thinking about getting Bam 00+ guess it a little bit smaller than 000 and little bigger than 00. Wonder will it fit 9 pellets in 2 3/4 shell with CB 1138 without dimping the hulls. Thanks
You’d have to load 8 or 10 pellets stacked by 2’s, 9 pellets bulges the hull out stacked by 3’s without the shot cup. Not much but a little. 35 cal 000 will stack by 2’s but true 36 cal 000 won’t.
I've been getting into 2-3/4" heavy loads recently *Thanks for the helpful info here* I'm still finding out what works best in my gas operated semi auto. Tyler - If you read this - What do you base the decision upon, to use 29 gr Longshot in the 1.5 oz load vs 28 gr LS for the 8 pellet load ? Is it just the way they pattern ? Also - Ever tried Mica Wad Slick ?
Never tried mica wad slick but it does work for it’s intended purpose. I’ve seen other people use it. As for powder charge, that was a matter of straight wall vs tapered wall shell.
@@theshotgunscientists speaking of, mine just got here last Saturday.. That thing works Great! I went through about 100 old loads and finished em off.. I really like the tapper it gives em.
@@chrystalsmith8732 I can buy them from the shop across the street from my house and from stevens firearms in the next town over. Got a brick of them last year at a different shop.
Every time I see the original AA hulls, I feel like I have missed out on something great. Everyone speaks so highly of those
You can get them from bpi and gunbroker, they really are great.
One of my all time favorites.
@@theshotgunscientists bpi?
@@Jerseyhighlander ballistic products
Original AA and Activs are my favorite.
Got a fair stash of the latter but not even a box of AAs
Hornady 000bk is 35 cal ..says it on the box...and it comes in a 5lb box for 36.00...swaged hard lead...great stuff
Yeah I know, local store keeps hornady buckshot in stock. I haven’t bought any because I plan on getting a .35 cal mold soon. The Lee 000 buckshot mold is .360 cal.
Would love to see a casting video like how Wade does it as well
You have some great videos , very clear , informative and so glad I found your videos.
Thanks man
You can load the remington STS hulls with the same components, they wear like iron, I have some on their 10th reload.
I know, I like those hulls a lot too I just prefer old style AA hulls.
I learned a lot from Bubba but I am learning a lot from you brother.
Thanks!
I'm excited to see more experiments in the 835. My only issue with mine is that I have to choose the perfect powder for lighter loads(under 1.50 oz) or else I don't get a good burn, and wind up dumping unburned powder out of my barrel. The lower pressures of the larger bore are a blessing and a curse, and it doesn't help that my barrel is ported... and so are my chokes...
Try using regular target wads for lighter loads, like the cb1138, they expand to the bore way better than a tps or lbc wad.
Compression formed have the line around the AA new hs doesnt have the square around the letters AA
The first run HS hulls do have the square around the AA, I have several hundred of the original production HS from like 2004. They look just like the compression formed hulls but shinier, and they have the separate basewad.
Great video, thanks. None of that is available here in Australia, maybe I will have to import a mold
Thanks man
holy healthy sasquatch beard. apparently I need beard oil. great videos brother. keep on.... great info man
Thanks man. I’ve never used beard oil lol my wife has a hair drier that’s a brush at the same time and I use it to basically straighten my beard after I shower.
Love your videos. Thanks for all the details.
Thanks for watching!
Wade’s the Friggin OG Boss! 😁👍
Sure is
👍👍those rounds look great good job thanks man
Thanks for watching!
great information ,get up the good work .
Your thumbnail showed an 18 pellet 000, twice the normal load. Did not see it in the video. Came here for the 18 pellet triple aught. I appreciate details like the nose taper for reliable feeding. Pruno
I just grabbed a random handful man. I have loaded 18 pellets of 000 though on here, it has to be in 3.5”.
I subed, I've had good luck with the MG42 wads in the straight wall hulls with buckshot, also use them for steel BB loads, all with LS powder.
Thank you man
I may need to try this load. I have some hornady OOO on hand to see how it does. I havent had much luck so far finding s load that will do what i want. Ive tried blue dot, red dot and longshot, all with the cb1138 wad with and without filler and OO buck and AA gray hull. Im patterning at 15 yards and my goal is roughly a 6 inch cluster which i have not been able to obtain thus far. Dont get me wrong, all the loads ive made have kept the pellets in the torso and would work. Perhaps these combinations and my rem 1100 with 22 inch slug barrel do not like.
Slug barrel? As in rifled? If it’s a smoothbore with a cylinder bore choke the only way you’re gonna get really tight patterns is by switching to .31 cal or smaller and using steel shot wads. Those pattern like federal flitecontrol buckshot. Loading shells like this and using a cylinder bore choke is only good for about 20 yards before the pattern starts to get really wide. If it’s a rifled barrel, buckshot will never pattern good.
@@theshotgunscientists its a smoothbore open cylinder as far as i know. No markings on the barrel stating otherwise. Time for more experimenting i guess.
Hey, new Shotshell loader. I have learned a ton from your channel. Most appreciated! Just curious tho, the .35 cal. You used, were they coated? Curious if powder coating would make them too large. Thank for any help!
It only increases size by like .003 it’s not enough to worry about
@@theshotgunscientists thanks for the info!
Subscribed 😊🎉
Love the vids. Great
Thanks man
I was hoping you could help me out a little bit. I plan to reload steel shot for waterfowl hunting. My dad has the machine and some shot but he doesn’t have any wads or powder. His machine is set up with bottles on the top and is set up for an ounce and 5/8 powder charge. What would be the best wads for that? It would be 3 inch shells of whatever brand shells I find, rio, Winchester, fiocchi, Kent, and any other brands I find. And what is the closest powder to Winchester 571. It’s what he used to use.
1 5/8 ounce of steel will barely fit in 3.5” 12 gauge man. It’s typically what’s loaded in 10 gauge. You’ll have to drop down to 1 1/4 to 1 3/8 ounces at the most. Blue dot or Alliant steel are the powders you need. As for 571, hodgdon hs7 replaced it years ago. Same powder, but hs7 was recently discontinued as well and as of right now no replacement exists.
where did you get the taper fitting that is on the 10Ga press and how is it attached?
eBay. Search “lee load all taper crimp” and you’ll find it. It just slides into the pre crimp station, friction fit.
Hey Heavy Load Guy , Great Video and Great Info . I know you said where you got that Taper die , but could you tell me again , Old Age Syndrome , but please tell me again, just for Old Time Sake ! Take Care and Be Safe
eBay. Search lee load all taper crimp
Thank you very much , I only meant the comment about Heavy Load Guy as a humorous greeting, nothing bad at all ! I hope you didn't misunderstand !
@@larryking606 I took it as a compliment lol I do like my loads heavy
Thinking about getting Bam 00+ guess it a little bit smaller than 000 and little bigger than 00. Wonder will it fit 9 pellets in 2 3/4 shell with CB 1138 without dimping the hulls. Thanks
You’d have to load 8 or 10 pellets stacked by 2’s, 9 pellets bulges the hull out stacked by 3’s without the shot cup. Not much but a little. 35 cal 000 will stack by 2’s but true 36 cal 000 won’t.
Have you ever done .37 cal?
Yes .375 cal 0000 buck I recently posted a short loading it and have done videos on it before in both 10 and 12 gauge
I've been getting into 2-3/4" heavy loads recently *Thanks for the helpful info here*
I'm still finding out what works best in my gas operated semi auto.
Tyler - If you read this - What do you base the decision upon, to use 29 gr Longshot in the 1.5 oz load vs 28 gr LS for the 8 pellet load ?
Is it just the way they pattern ?
Also - Ever tried Mica Wad Slick ?
Never tried mica wad slick but it does work for it’s intended purpose. I’ve seen other people use it. As for powder charge, that was a matter of straight wall vs tapered wall shell.
Where did you purchase the taper?
eBay
Could you have replaced the CB1138 wad for a gaulandi ssw in the second load/straight hull?
Yes
What chrge of blue dot would you use on that first load.
34 grains although 8 pellets may not fit for the crimp anymore
What do you think of remington gun club hulls?
They’re among the best 2 3/4” hulls for reloading. Tapered hull anyway. We’ve got lots of them but I just prefer the original AA.
I casted some .36 - 000 and 10 pellets comes out to 1.63 oz. Is that going to be too much payload for a 2 3/4 hull?
Nah I load 10 all the time
@@theshotgunscientists awesome! Loving the library of videos you guys are collecting. Thanks for all the info 😃
Could someone tell me who makes the taper crimp?
eBay, Lee load all cone crimp
where did yiu get the shell taper crimp die?
eBay. Search lee load all taper crimp
@@theshotgunscientists thank you. I just found one and will be buying it.
@@theshotgunscientists speaking of, mine just got here last Saturday.. That thing works Great! I went through about 100 old loads and finished em off.. I really like the tapper it gives em.
Oh Crimp thing !
Can you reload a hull you put that external taper on?
Would this load work with the newer AA hull?? I have a bunch of the newer AA
Yes
Do you have Winchester 209's or not? You said 2 different things in the same breath @ 7:45. I haven't found Winchester 209's in the past 3 years.
I’ve got thousands of them, along with CCI standards, federal 209A’s and cheddites. What are you referring to though?
@@theshotgunscientists Winchester 209's.
@@theshotgunscientists Winchester w-209. No one in America has had them in the past 3 years.
@@chrystalsmith8732 Yes
@@chrystalsmith8732 I can buy them from the shop across the street from my house and from stevens firearms in the next town over. Got a brick of them last year at a different shop.