Field tested 2.75 inch Buckshot #1 & #0
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Let's take a closer look at some of my favorite big game hunting rounds! Today we are taking a look at the 2.75" #1 Buckshot loads!
B.R.O. Merchandise available now at the link below!!
stockandrod.co...
/ bubbarountreeoutdoors
Gary Caskey’s Facebook and email is below!
/ gary.d.caskey garydcaskey@hughes.net
Click on the link below to get 10% off of your total order with Marty’s Molds: www.martysarms...
Enter discount code ‘BRO2020’ for 11% off at Svarog Bullet molds: en.svaroghunt.ru/
/ bubbarountreeoutdoors
Email Mr Bill Kalwas for 3.5, 3 inch and 2.75 inch hulls! Wkalwas@yahoo.com
www.thexringus...
ckmolds.com
www.bubbarountr...
www.kicks-ind.com
www.ballisticpr...
leeprecision.com/
www.precisionr...
www.truglo.com
www.osceolahat...
Positive Impact Motor Sports: positiveimpactm...
Thanks for the videos reloading has turned into a great hobby of mine the buckshot are great preformers
MG42 is awesome wad! I use it for 1 Oz. Steel shot and 1/1/4 Oz lead dove loads also. Thank for all you do for the channel Wade!!!!
Dogs make everything better!
Ive been very happy with BPI as well. I ordered their TPS wads for a steel project I'm working on in 12, 20 and .410. They have great prices, as you mentioned, everything arrived quickly and the wads are of outstanding quality. I've made a few up so far but haven't tested the patterns yet. Only thing I'd do different next time is I'd buy the unslit 12g wads. Nothing wrong with the preslit but I realized after working with the unslit 20g, I'd like to be able to cut them to various levels to see how it'll effect patterning. Great video as always.
Yeah buddy! I like being able to control the wad pedal cut myself.
Loaded shotshells for the first time #2.
5 today, thanks for your knowledge.
Thanks Wade, I got a Marty’s .30 #1 mold last year and I have put together some good loads with it. Thanks for answering my question as to why the Winchester 2 3/4” #1 was so hard to mimic, .285 cal pellets definitely explains it…. I tried MANY different component configurations with .30 cal pellets and dang near scratched a hole in my head trying to make it work….🤔
I figured that the Winchester pellets were slightly smaller than .30 cal but was very surprised to find that they are .285 cal! I have loaded some awesome copies using .275/.285 cal pellets!
Man you always bring the know how I'm still don't trust.myself to reload but very interested in it
Wade, thanks for the videos you make! I have been reloading for over 40 year's, and I always learn something new from your videos! You show the real how to, do it your self. That no manuals don't. always love to see you brother! God bless! Jus C. Marquez.
my pleasure brother!
For Static, I wipe inside hulls with Scent Free Dry Sheets. Works good wiping your hoppers as well.
Cute pup..... Great video Wade!!
Man I Love the authenticity of your videos! Very informative and clearly experienced in your art. Keep em coming, I want to subscribe! From Northern Alabama, so understand Beautimus!!!! Love me some Skeeter too!
LOL! My pleasure brother!
You are the man! Thank you for sharing and teaching.
Once again another outstanding video Mr. Rush. You are right the rain needs to stop. There goes are shrimping season here in Fla.
Great video/knowledge per usual man.
If anyone is in the UK. Clay and Game is the place to go for reloading products. And they are referred to as Gualandi super g magnum wads (WAD12SGMAG) and Gualandi H12 wads (WAD12GUAH12) here in the UK/Europe
Some old school rounds. I like it.
hey Charles... I sent you a Facebook message!
Weather man lied here in NC too! We got rain one of the four days they said this weekend and got three inches that day and now we're getting that Columbia heat wave, 90+ for a while. Before there were pools there were sprinklers and I'll be playing in mine!
Same I'm on the coast, southern outetbanks..humid son
Thanks again Wade! Some more great loads to work on putting together. Very good videos! Keep them coming!
yessir!!
Fantastic video ..I just got 2 lbs of long shot .Now I have a good recepie for close range deer .Trying to find something that will work for 1 -1 1/4 oz at 1550 /1600 fps ..There was one my friend's dad made at 15 pellets for a 2 3/4 inch hull.Just don't remember pellets and powder .Thank you for what you do .
Thanks!
Right proud of the wife yesterday 112-115 lbs slamming the tac 14 870 with some old estate pretty hot 00 9p buck she hit that popper and slapped it down, shes used to 20g but i knew she could handle it, and handle it she did
😂 That's awesome!
I remember seeing skeeter!
If I had Facebook or social media in any form I'd be on there, I think I'm subbed on TH-cam to buck and slug
I use the ballistic products BAM 1b in a near identical load with precision buffer. Patterns awesome out to 50yds
Activ all plastic had a excellent #1 buckshot round.
Good to see you back. When you roll crimp do you measure where to stop or just by feel or sight? I either over roll or under roll.
I, I, personally go by feel then look and it always is perfect, you get a feet for what column you have going on after a bit and the preassure ur exerting
Would be nice if you could get BP to send you some of their BAM shot for loading and testing. Most reloaders don't shoot enough buckshot to justify the purchase of a mold/smelter kiln and source the lead...but they would buy a 22Lb bag of shot. I've used the MG42s in the straight wall federal top gun hulls and in the remington sts hulls for 00 9 & 10 pellet loads with LS powder, but you pretty much have to use wad slick for the sts hulls of it'll wrinkle the base of the hull.
Ohh yeah! I got several sizes of BAM buckshot ready to go to the range! should post soon!
With #1 & #0 buck my mossberg 835 hates them and I've used turkey chokes all the way out to cylinder bore. But 00 and 000 shoot amazing. Now with my single shot Steven's 30 inch barrel full them #1 & #0 hold a pattern like a slug almost. 😆 🤣 I use it during primitive hunting season and I love it. I know you say you only put on here what works for you but I've used your exact wads and hulls just different powder and measurement and they work perfect for me also from 2. 3/4 all the way up to 3.1/2
you never know what your shotgun is gonna like! My 870 likes the bigger pellets also!
@@BubbaRountreeOutdoors yeah my old 870 did too. I traded it for a 3 1/2 mossberg but it also likes the big pellets. I can't wait to see what your 2023 season is gonna bring you.
The 835 is a 3 1/2 inch over bored barrel .you need the right wad and gas seal to get the performance out of that cannon .I use the 935 but have a fully rifled barrel and shoot slugs only on that monster .BPI has the gas seal for overboard shot guns
Another top vid mate!
A used dryer sheet rubbed on hull will remove static ✔also powder measures
When I build pc's you can buy a wrist strap which you wear and attach to a earthing point in order to stop static charges :)
Im the mg42 with 33 plus or minus out of round bam, i use my finger or usually a sharpie butt to hold them down or they will want to kinda "pop" up but not bulge the hull and after about the 2nd or 3rd row they stay flat, 14 of them in one of them wads with longshot...hammer hammer hammer
I do the same!
With 00plus bam i sometimes use 12, somrtimes 14, if 14 i have to RC, just long enough hull
Can you make a buck shot load out of a 2 3/4 inch Winchester AA using green dot or long shot. I need a deer load. I 13:31 have been a subscriber for 2 years. I have learned so much. Thank you Sir
This may help ya! It's an old video but a good 1: th-cam.com/video/4ezCOIj73wE/w-d-xo.html
Rather its with with longshot and blue dot(favorite), hs6, unique..them wads just straight up preform son!
Would Cheddite hull and primer, 26gr of Longshot, SSW WAD, 14 #1 pellets, and buffer as you’ve described be an equivalent load to the MG-42 load? Thanks! Love your videos.
thanks buddy! and yes that would work!
Mr Wade the loads you are putting together you say are 1200 fps. Most of the factory rounds run 1350. How much longshot and weigh shot will you need to get that.
this 1 should help out: th-cam.com/video/kzPFLsQzvnQ/w-d-xo.html
Do you find that the accuracy of the powder charge is less important in shotshells than when reloading metallic cartridges (6.5CM, 308, 6GT, etc)? ie you need 25.0 grains of Longshot and you pour in 24.75-25.25) a +- 0.25 grains difference than specified.
Shotshell loading is way more forgiving than metallic. That small variation won't be a factor.
Greetings Mr Wade from upstate NY. Really enjoy your videos! First, thanks for the tip, I have gotten lots of great hulls from Bill Kalwas who is just north of where I live. Bill even helped me with some 16 gauge hulls for my old Ithica model 37.
I have a question. Have you ever done a comparison between buckshot loads with and without full wads (full wad vs gas seal). Just curious how much it affects the pattern. I don't load for hunting just home defense loads. My favorites are a 27 pellet #4 and a 16 pellet #1 using longshot. Wondered if you had any thoughts.
hey Chris! Thanks buddy! Yeah, Mr Bill is top shelf!
@@BubbaRountreeOutdoors So are you Wade, keep up the good work!
What do you put in the shell with the 00 Buck to keep them from moving around
Lol dont feel bad, i got a ounce and s eight of number 8 in my armory floor right now😂
Between the 1138 and mg42....with bam 00plus, i cant seem to put a load(based off data, and A LOF FROM YOU) it seems like i cant put a 00plus load together in 2&3/4 and 3" without it preforming..just insanely well especially with original buffer
ohh yeah! some of my favorite loads Travis!! They will reach out there a ways too!
Lol I have a female cat named cleetus lolol. My 2yr old has changed it to "keet keet"
Do you go through a lot of single o and oo molds and what do you do with the old molds as you replace them ? I'm trying to get a used set of molds in these two calibers I cannot afford new ones.
Molds don't wear out bro,but they're a good lifetime investment!
👍👍
If you took a jar of your buffer and took the paper of the jar and then you took 1000 men that never reloaded shells it would take a 100 years for one to guess it was buffer for a buckshot shotgun shell
Does precision buffer substitute for original or 47?
No... Precision buffer is heavier and denser than the BP buffer. So, the Precision buffer can spike pressures more than the BP buffers. You just have to be careful when using the Precision buffer and adjust your powder charges as needed. My formula is to drop around 7% off of the powder charge when using the Precision buffer.
@@BubbaRountreeOutdoors That answers my question and thank you.
Wade why did you put 26 grams of powder in the first 31/14 pellet and 32grams of blue dot 31/14 pellet in the last one?
That's my best performing powder weights in the load. Those are some great performers!
Wade I'm not saying anything bad about your work , I just don't understand why it takes 6 grams more of the Blue dot to achieve the same performance as the other powder for the same load size. Is the powder of the 26 grams a hotter powder than the Blue Dot ?
@@johnwiggins1385
1st off... The measurements are in grains not grams
2nd... The burn rates are different from powder to powder which affects pressure.
@@johnwiggins1385 OH! I misunderstood ya John! The Longshot is hotter and weighs more than the Blue dot of the same volume.
Can you roll crimp these loads.
yes you can.
Will those wads work in a tapered hull like AA or Remington nitro?
No, they don't work well in the tapered 2.75". The CB1138-12 are a much better option in the tapered 2.75"
@@BubbaRountreeOutdoors thanks, ive got over a 100 lbs of buckshot I cast, that I need to load up, 31 caliber and 00
@@BubbaRountreeOutdoors ok, I just ordered a bag of those 1138 wads and a bag of mini nitro cards in case I won't to leave off a pellet or two. Had a old ballistic products catalog, prices have gone up!lol
@@donaldatkinson7937 Oh mu gosh! Prices have gone from ridicules' to stupid!
I have asked you did not respond. Try again. Where can I find complete load data for 2.75 loaded with #7 steel shot?
this is what I use: www.ballisticproducts.com/Download-Status-of-Steel-manual-20th-ed/productinfo/XMSTEEL/