How to Fix Rust Holes on a Budget Using Fiberglass - NO WELDING
ฝัง
- เผยแพร่เมื่อ 21 ก.พ. 2019
- How to repair rust holes on your vehicle’s body panels using fiberglass. Now before I get into it, as a disclaimer, this is a budget repair and when done correctly can last for a very long time. However with that being said, if you are wanting to restore a vehicle properly, than this isn’t the repair for you. This is a repair where it can be done at home, doesn’t cost a load of money or require any specialty tools, and can easily clean up your vehicle. Fibreglass is strong, so it won’t fall out like a body filler even when using the reinforcement mesh. The two main concerns with fibreglass is that it doesn’t expand or contract like metal, so a repair maybe visible. And it may have bonding issues with steel, so both these areas will be covered in this video. I have used this method in the past for low budget daily drivers without any issues and it held up great despite living in an area where vehicles are exposed to harsh winters. #oemtools #rustrepair #fordranger
Surface Prep Sander Kit: mobiledistributorsupply.com/2...
Air Die Grinder: mobiledistributorsupply.com/2...
Amazon links for some of the products used in the video:
USA:
Chemical rust treatment: amzn.to/3onBdoE
Wax and grease remover: amzn.to/2M6xvCV
Fibreglass matting cloth: amzn.to/3ouzNsR
Resin: amzn.to/3iRTnxC
Short strand filler: amzn.to/3pm0lxD
Glazing putty: amzn.to/3iQiAbS
Etch primer: amzn.to/3qXvxUm
Filler Primer: amzn.to/3iQSOnT
Backing pad: amzn.to/3qUc5rl
80 grit sandpaper: amzn.to/36gsUF5
180 grit sandpaper: amzn.to/2Mwjr5i
220 grit sandpaper: amzn.to/3sZf5V7
320 grit sandpaper: amzn.to/2YfzAPt
400 grit sandpaper: amzn.to/3qOEO0G
600 grit sandpaper: amzn.to/3t020uP
1000 grit sandpaper: amzn.to/2YkJzmq
1500 grit sandpaper: amzn.to/3qTem61
2000 grit sandpaper: amzn.to/3iWGzWX
Polishing Compound: amzn.to/3omIghF
Wax and applicator kit: amzn.to/36xqYs7
Canada:
Chemical rust treatment: amzn.to/3osNlVK
Wax and grease remover: amzn.to/39nLn4F
Fibreglass matting cloth: amzn.to/3a1NhHa
Resin: amzn.to/3cdRfix
Short strand filler: amzn.to/3iSXDgG
Glazing putty: amzn.to/3pmn1Ob
Etch primer: amzn.to/3aaS5tE
Filler Primer: amzn.to/2NucGl5
Backing pad: amzn.to/2M71Hhg
80 grit sandpaper: amzn.to/2MtEjdu
180 grit sandpaper: amzn.to/2Yf6rUs
220 grit sandpaper: amzn.to/2YjmoJe
320 grit sandpaper: amzn.to/36cqjfi
400 grit sandpaper: amzn.to/3qVYXlK
600 grit sandpaper: amzn.to/2YhR9OJ
1000 grit sandpaper: amzn.to/36e2fZs
1500 grit sandpaper: amzn.to/3cfSJZx
2000 grit sandpaper: amzn.to/3pot4BF
Polishing Compound: amzn.to/36g3PKq
Wax and applicator kit: amzn.to/3sZXoF6
Website: 4diyers.com
Patreon: / 4diyers
Facebook: / 4diyers
Google Plus: plus.google.com/+4DIYers
Twitter: / 4diyers
Instagram: / 4diyers
Tumblr: / 4diyers
Pintrest: / 4diyers
Tools/Supplies Needed:
-grinder with cutting disc
-surface sander with 80 grit discs
-80 grit sandpaper
-180 grit sandpaper
-220 grit sandpaper
-320 grit sandpaper
-400 grit sandpaper
-600 grit sandpaper
-1000 grit wet/dry sandpaper
-1500 grit wet/dry sandpaper
-2000 grit wet/dry sandpaper
-sandpaper backing pad/sanding block
-chemical rust treatment
-wax and grease remover
-denatured alcohol
-clean lint free clothes
-plastic container
-paint brush
-stir stick
-fibreglass matting cloth
-2 part spot/glazing/finishing putty
-short strand fibreglass filler with hardener
-polyester laminating resin with hardener
-acrylic enamel single stage color matched paint
-black undercoating
-etching primer
-filler primer
-safety glasses
-latex/nitrile gloves
-respirator
-water
-bucket
-carwash soap
-polishing compound
-microfiber clothes
-painter’s tape
-paper
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author. - ยานยนต์และพาหนะ
Due to many requests, here is the Amazon links for some of the products used in the video:
USA:
Chemical rust treatment: amzn.to/3onBdoE
Wax and grease remover: amzn.to/2M6xvCV
Fibreglass matting cloth: amzn.to/3ouzNsR
Resin: amzn.to/3iRTnxC
Short strand filler: amzn.to/3pm0lxD
Glazing putty: amzn.to/3iQiAbS
Etch primer: amzn.to/3qXvxUm
Filler Primer: amzn.to/3iQSOnT
Backing pad: amzn.to/3qUc5rl
80 grit sandpaper: amzn.to/36gsUF5
180 grit sandpaper: amzn.to/2Mwjr5i
220 grit sandpaper: amzn.to/3sZf5V7
320 grit sandpaper: amzn.to/2YfzAPt
400 grit sandpaper: amzn.to/3qOEO0G
600 grit sandpaper: amzn.to/3t020uP
1000 grit sandpaper: amzn.to/2YkJzmq
1500 grit sandpaper: amzn.to/3qTem61
2000 grit sandpaper: amzn.to/3iWGzWX
Polishing Compound: amzn.to/3omIghF
Wax and applicator kit: amzn.to/36xqYs7
Canada:
Chemical rust treatment: amzn.to/3osNlVK
Wax and grease remover: amzn.to/39nLn4F
Fibreglass matting cloth: amzn.to/3a1NhHa
Resin: amzn.to/3cdRfix
Short strand filler: amzn.to/3iSXDgG
Glazing putty: amzn.to/3pmn1Ob
Etch primer: amzn.to/3aaS5tE
Filler Primer: amzn.to/2NucGl5
Backing pad: amzn.to/2M71Hhg
80 grit sandpaper: amzn.to/2MtEjdu
180 grit sandpaper: amzn.to/2Yf6rUs
220 grit sandpaper: amzn.to/2YjmoJe
320 grit sandpaper: amzn.to/36cqjfi
400 grit sandpaper: amzn.to/3qVYXlK
600 grit sandpaper: amzn.to/2YhR9OJ
1000 grit sandpaper: amzn.to/36e2fZs
1500 grit sandpaper: amzn.to/3cfSJZx
2000 grit sandpaper: amzn.to/3pot4BF
Polishing Compound: amzn.to/36g3PKq
Wax and applicator kit: amzn.to/3sZXoF6
I am a professional fiberglass repair technician... and I just want to say that your video is the best example of a proper repair I've seen. Great job man!
Thank you so much, I really appreciate the feedback and kind words!
I would like to follow you so i can learn few fiberglass repair
@markaraujo8087 That would be great, you can anytime. I live in Eastern Maryland though, and I haven't made any videos yet.
I left my truck parked in front of your house.....so you can have something to fix for your next video. Its a win/win.
LOL, sounds like a plan!
Hahaha
Lmao
🤣🤣.. cool, I’ll be next😂
I will leave my truck to! I have a 98 f150 with rusted cab corners. Have at it buddy! Lol
Considering this was budget job as its intended purpose... this was a top quality job..
bravo 👏 👌🏼
Thank you :)
Agree!
That's what I was thinking. In High School I worked for a well respected body shop and I can tell you that none of our body men put this much attention into their rust hole repairs.
Just fixed a rust hole in my wheel arch using this method. Here are some tips for beginners from my experience:
1. Make sure to indent the metal around the hole. I forgot to do that step, and ended up with a slight hump in my repair area.
2. Don't use primer before using body filler, or atleast try it on a small area at first. I had a lot of issues with the finishing filler coming off in chunks, even after waiting for 3 hrs before using it after spraying primer.
3. Don't be afraid to use multiple layers of body filler. I thought I screwed up when multiple nicks appeared after sanding the filler, but as it turns out I just needed 2 more thin layers near the low spots. The key is several light applications of filler.
4. Look at the repair area from multiple angles when using the fillers. I thought that the area was level, but as I found out after applying primer the area was quite wavy. The longer you sand, the better your result will be.
5. Make sure your layers of fiberglass actually stick together. My front fiberglass piece, as it turns out, didn't stick to the back one, there was a gap due to the metal being in the middle.
6. When painting, make sure a big area around your repair area is clean. I now have multiple dust spots due to underestimating the paint area.
That's about all of my tips. I like this method a lot, and hope to get at least 3 years out of it before the rust comes back, perhaps even more.
Using a primer filler spray after applying/sanding body filler and glazing putty helps to smooth the surface. Then sand it again. Spray your 1st two coats of base and two coats of clear then wet sand and buff.
If using phosphoric acid type product like Ospho, kleen strip etc it will kill the rust for good. No coming back. It's chemically impossible if you get it all. After decades in the restoration field I can say that if you follow the instructions and pit more time into prep and doing good job it will last a lifetime. It's all in the prep. Painting is the easy part. Get it looking great in primer and all else will be nice. Take your time. Weather and humidity can play havoc on times for resin, filler, primer or paint flashing. Another thing, the better products you use the better and longer it will last. Using kylon is ok but using CarRep 2k primer, paint and clear is way better for 24.99 a can. Has NO SHELF LIFE. Not like other 2k coatings no canister to rupture and then 24 hours of pot life. CarRep has really impressed me. You can use on small areas at your own pace. Not hurry up and get it all ready for coating cause you only got a small window of time. You can take your time and do a job right. I don't sell it I use it and it's a great product.
Thanks for sharing your tips. I am about to fix my car rust hole. I am just wondering how long does your fix hold up? I am hoping mine will last for at least 2 years.
Thanks for sharing your mistakes/learning opportunities. I'm about to start my project, maybe a little nervous about it...
@@phamtinkt88 the area where I used fiberglass seems to be holding up okay. The areas where I just sanded, applied rust converter and painted have come back with vengeance - I should probably redo it now.
If you use this method, take my advice: cut as much rust out as you can, and replace it with fiberglass. Rust converter alone simply doesn't work due to rust being on the other side of the panel, sadly.
Also, make sure to use quality paint. My clearcoat is cracking aswell at this point.
Having been in the collision industry for almost 40 years. This was a very good video. There is just a couple of little things that could have been brought to light but overall amazing! The best I have seen on utube. You obvious have had some training in the field. I doubt the average back yard worrier well get the body work to look this good with black lol. You give a hick of a lot of important information and would recommend that people watch the video several times to pick up everything that you talk about. Thumps Up!
Thank you so much for the kind words and feedback! No official training, my dad had a body shop briefly before I was born and I have some friends who work in the body body industry too. I just managed to pick it up here and there.
If something was lacking please tell us so we all can get it right.
ur the first guy i have seen to treat the metal so it will last longer
Really enjoyed. Tons of great tid bits of info. No frills and no annoying music. Thank You!
Thank you :)
Great video, shows every step and I’m especially glad you mention the sandpaper grits every time because I find it sometimes difficult to choose what to use!
Thank you for the kind words and feedback, always happy to help :)
Your fast forward portions are beautifully done, we get to see every detail of your repair in a reasonable time frame.
Thank you so much, greatly appreciated :)
i like watching repairs like this, this is one of the best outcomes ive seen, the paint looks perfect for a rattle can job
Thank you :)
This has been the most straight forward, and easiest video to follow on this type of repair. So glad I stumbled on it.
Clear and informative videos like this are incredibly appreciated! It's 3 years later, but I've got a 2005 Pontiac G6 with some rusting I want to repair before winter and this may be the method I go with. It'll be much harder on the lower trim area since there's more shaping and a plastic strip to account for but the car was only $1k so anything is better than nothing 😆
Love this car already though and want to make it last! Thanks so much for the fantastic walkthrough!
Wow!! What a wealth of info!! So many questions I didn't even know I had were answered!! Thanks for understanding the need for a budget repair!!! :)
This is the best tutorial video i have come across in my entire life! Thank you!
Thank you :)
I'm a junior in highschool doing an AutoBody collision repair program. I have an 08 Sierra with fender flares my dad threw on to ignore the rusty fenders. Most of the stuff in this video is pretty accurate to what we do in the shop ( commission based ). Besides using different brands/higher quality tools. This fix works, and it works well. If you can do it at home do it, its similar to what would be done at a shop for a much higher price.
Thanks for the tip! I always wonder about the longevity of this sort of thing especially since I'll have to do it on an old car that does not have replacement parts available!
@@dreadpenguinlord340 or you can buy a sheet of metal and make your own
This is the best video on the subject. With the best end result. Thank you.
I would call this an IMPROVED budget repair since unlike most you actually use a rust converter. Great video. Two thumbs up.
Thank you so much :)
I am a complete nube when it comes to bondo. This video was invaluable. Thank you so much. Your result looks like a professional body shop did it. It is way beyond anything I was imagining. Awesome.
Always happy to help and thank you for the feedback :)
@@4DIYers . H vh do u x cry by fcc x DC, CB xx CB. CB
Wow, you are extremely thorough in your explanation, well done and thanks.
Thank you :)
I’ve got a 1994 Jeep Grand Cherokee we bought it knowing it would need some work, we discovered holes in many different parts of the body and in the floorboard I was originally going to take it to a body shop till I decided to watch some videos to see if I could fix it myself and sure enough this was the first video to pop up and now I’m only 40 dollars in and I’ve gotten all the holes taken care of thank you your video really saved me a few hundred bucks.
Awesome to hear, glad I could help and thank you so much for sharing your experiences.
Budget repair explained and done professionally, well done thank you
Thank you :)
Very detailed, very easy to follow. Thank you for taking the time to share this!....
Thank you :)
This is one of the best underground DIY video and satisfying at the same time that the job will surely last a long time. I also did mine waiting on the resin to dry out, I hope mine turns out well.
Thank you, I really appreciate the feedback :)
What a perfectly explained step by step procedure, thank you.
Keep up your good work.
Thank you for the kind words and feedback :)
Exactly what I was looking for, thank you, very well produced. Lots of great tips and basic techniques for the average DIYer. Great attention to detail giving an excellent final product. You didn’t choose to do a spray clear coat. My 2009 Ford Escape right rear wheel well has a hole as almost every other Escape of that year.
Thank you so much for the kind words and feedback. Greatly appreciated :)
This looks better than most of the videos of people"professionally" repairing them with metal.
Yes, it LOOKS better at first. When dealing with metal that is rusted through, the only way to beat it is to weld in new metal. Fiberglass is easier and most likely cheaper, but the repaired area will rot again, no matter how well done the repair is.
@@j-psalmi8039 yeah but for $500 cars this is ideal
@J-P Salmi, as mentioned in the video, when done correctly this will last for many years. A weld in patch can also rot out if not done correctly either. The key is removing the rust and then sealing the surface so moisture don't come in contact with the metal. I wouldn't post a video that was lying to my viewers.
Thank you Bob :)
@@4DIYers did the same to my car, it only lasted about a month. Guess sometimes it workes, sometimes it doesnt. Still great Video.
I watched this video twice. I will watch it one more time as this is what I need to do to my truck rear fender. I like the resin repair because if it is done right, it will last a very long time. Thanks 4DIYers great job.
Thank you for the feedback and happy to help out :)
Feels like i'm watching a Chris fix it vid! Great job!
I think you covered everything here👍
i did this on a ford ranger to patch a hole in the corner of the roof that had completely rotted away. job lasted 6 years and was still unnoticable when i gave the truck to my cousin and he wrapped it around a tree one night. fiberglass works, but you do need to be rather aggressive with your grinding, get ALL the rust out, or the cancer will just spread under the repair.
Excellent Video and it explains in detail what needs to be done to get your car looking new again
Thank you so much for your feedback :)
I did this on a 72 El Camino back in 82' The whole driver side rear lower quarter panel was totally rusted away. Same process as seen here just a larger area. It definitely works! Mine came out perfect and the final paint job was very impressive for one of my first paint jobs! Good memories! Great video!
Awesome to hear and thank you! Any chance you still have that El Camino?
@@4DIYers No I didn't keep it but I surly wish I had! I went on to buy and flip many many more vehicles after that one. They're like children I guess.. you raise them up well and let them go.. Thank you for your response.
Really enjoyed your entire video & commentary. :) Very thorough & detailed work on your truck.
Looks flawless and fantastic.
Thank you :)
That was a really great video. Well shot, and clearly explained. End result looked fantastic!
Thank you so much for the kind words and feedback!
I like this technique. Fiberglass sticks to about any roughed up material. For big holes I use wire mesh, then fiber glass only as a base to lay Bondo. I use cloth as opposed to fiberglass matting. I allow the cloth to partially harden before placing it. Right now, I am using it to patch up the rubber out rear bumper of my Dodge caravan which was rear ended. Cracked the entire length. Only a patch job to avoid it falling apart.
This is the best comprehensive but easy tutorial for rust repair.
Thank you :)
Wow! Great job man. You definitely have talent.
Thank you :)
Was about to repair my 07 ford rear fender glad I watched this now I am sure I can do it
Chuck Lucas how’d it come out? Have same spot on 06 about to operate
Have not painted the repair yet to much rain but so far so good
Wow you did a really nice job!! Thanks for the step by step process!
Being from California makes me so glad. I just got a 77 ford Quadra van that sat for 15 years, only some rust on the “gutters” and a hole in the a pillar.
Not going to lie, I'm definitely jealous lol. I just picked up an 06 Ram from southern US and apparently it's only been in Canada for a couple years. Clear than trucks 10yrs newer, I'll have to make sure it's well coated for the winter.
@@4DIYers Shoot that baby with oil inside every panel (punch holes if needed) and around the wheel housings in and out, do the underside body, then coat the brake and fuel lines. The design of the rear wheel housing on trucks allow dirt to be thrown up and lay against the fender lips to rot out as in the vid.
Get oil in there and that will no longer be an issue. Psst. I live in the Buffalo area- probably the worst area in the world for salt roads and this system works. Mike
Good job on the repair process and presentation. Keep up the good work. :-)
Thank you!
This we could get a list on everything we need so I can order it, and then watch the vid step by step as I go?
This is a great video tons of info and step by step instructions thanks for the details
well done man, a wealth of information. And a budget title for what amounted to premium-like work!
Fantastic video best video on repairing a rust hole out there. You explained everything that you did and the grit sand paper. I will be repairing my truck the exact same way. I only hope my truck will turn out half as good as yours. I watched this video at least 3 times. Awesome job and thank you for taking the time to help us out. God bless you sir. 🇺🇸🇺🇸
Happy I could help and thank you so much for the feedback!
Are you chris fix brother or what
Cousin*
aww that would explain where u got the itch to fix on rides... how old were u on the 1 st video fix u did... & what was the ride then.... & where do u see your self by the time u r chris fix's ( your cousin's ) age ......??? & what other future or now rides u have there now...... & what u r looking 4 ward to owning or fixing in the future there.............
lol
Thank you so much for an excellent video. I just finished a repair on the fender of my daughters 2009 Honda Accord similar to what you did in this video. I viewed the video over and over and step by step during the repair. It was invaluable to me along with the detailed list of materials. I really learned a lot.
Awesome to hear! Thank you so much for the kind words and feedback.
Wow I am so impressed on how this repair turned out.
Thank you!
Amazing paint work
Thank you!
Good job! That looks great for a budget repair!
Thank you!
Nice job buddy I love a man that can fix things
Excellent results- well explained, too ! ✅
That was absolutely amazing from start to finish great work... I am now a new subscriber to your channel... keep up the great work and the videos
Thank you so much for the feedback and support, greatly appreciated :)
Wonderful video, I came in expecting a super sketchy fix, but this looks very good and hopefully will last a long time as long as the fiberglass doesn't separate from the steel fender.
Thank you so much, I really appreciate it!
What an excellent job you did making this `How to`video. Thank you for doing such a thorough job. I`ll be using this for my third attempt at DIY rust repair.
Thank you so much!
Why can't all videos be like this. Perfect. Lots of clear explanations and details.
Thank you so much, really appreciate the kind words!
Well done. Thanks for sharing
Thank you :)
Looks Great and good explanation.
Thank you :)
I have a mustang with a salvage title, so I dont want to spend much money on it, but I want to get rid of some rust in the rear quarters. This video gave me hope that I could do it without a welder. Thanks! I am going to give this a shot this summer. Thanks for the comprehensive video!
Incredible transformation!
Thank you!
Pro level "budget repair"!!!
My budget repairs usually involve duct tape.
Thank you so much!
New subscriber to your channel ..... exellent work my friend you make it look easy. Very well done should last for a while. Shout out to you from Mexico
Thank you so much, I appreciate the kind words and support :)
The best most satisfying video ever. Perfect job.
Thank you so much :)
Best tutorial video of all time, great job!!
Thank you :)
im about to try this, thanks for the video
No problem!
Good job, I have been repairing rust with this method for years, never had a problem. I have customized many a metal car with carvable foam covered with fiberglass and filler, won first place full custom at Autorama with a 1967 Camaro. Had car for eight years without any problems.
Thank you so much for the kind words and feedback! Congrats on first place too. Any photos of your build?
pic or lie
@@4DIYers Where would I send them??
@@corruptedbrain6 I've been dealing with people like you my whole life, you look for flaws then drive away in a rusted out VW.
@@4DIYers I always cut out as much rust as I could, sand blasted area and finished up with Metal Prep, painted back side if I could. I always took lots of pictures as I worked.
Very interesting video. Going to plug some holes in my rear door skins.
Beautiful Repair, paint match was spot on.
Tools/Supplies Needed:
-grinder with cutting disc
-surface sander with 80 grit discs
-80 grit sandpaper
-180 grit sandpaper
-220 grit sandpaper
-320 grit sandpaper
-400 grit sandpaper
-600 grit sandpaper
-1000 grit wet/dry sandpaper
-1500 grit wet/dry sandpaper
-2000 grit wet/dry sandpaper
-sandpaper backing pad/sanding block
-chemical rust treatment
-wax and grease remover
-denatured alcohol
-clean lint free clothes
-plastic container
-paint brush
-stir stick
-fibreglass matting cloth
-2 part spot/glazing/finishing putty
-short strand fibreglass filler with hardener
-polyester laminating resin with hardener
-acrylic enamel single stage color matched paint
-black undercoating
-etching primer
-filler primer
-safety glasses
-latex/nitrile gloves
-respirator
-water
-bucket
-carwash soap
-polishing compound
-microfiber clothes
-painter’s tape -paper
yeah but which rust converter? twhats the brand?
How much was this project. Budget ok but is it in my budget
@@johnf.hebert1409 I believe it was Krud Kutter Rust Remover and Inhibitor.
Would that surface sander work with a smaller pancake compressor?
I was writing everything down then seen this comment. Thanks.
Killer video my truck is worse than this because it's a 7 year old GMC.
Wow It looks great, However for my 15 year old civic I don't think I will do quite as much as you did for this vehicle. But I did learn quite a few things, Thanks
Always happy to help and thank you for the kind words :)
Great video on a budget repair....done correctly. Thanks for explaining it so well. And yes, you did get that to come out looking great. Better than mine is going to look I promise.
Was expecting a cheap and easy way to fix it, I'm impressed definitely using this a guide
Thank you :)
This is the best bodywork video I’ve watched, amazing explanations
Thank you so much for the kind words :)
Effective but very labor intensive. That explains why bodywork is so damn expensive.
Yep it can add up pretty fast, even more so when top quality materials are used like on a restoration. You can easily spend $1000 just in paint supplies.
Thanks for sharing and providing details for each step..
Using the filler over the glass made this repair a win win. I've seen this done without filler over the glass and the outcome looked good but after a couple weeks bubbles appeared in the glass under the paint. It turned into an endless up keep on the repair. I have a 4th gen dodge ram that could use some repair and this method looks good to me.
Thank you :) I actually just bought a 3rd gen Ram over a week ago. Soon to have videos on it. Thankfully it's a southern truck and it's only been in Canada for a couple years so there's next to no rust on it.
Excellent video tutorial! I need to do this on my E46 3series here in London England, rear arch and sill surface bubbles, so thanks for a great tutorial as I don't weld(as yet!)!! Lol 😅👍💪😎🏴
Ps. Definitely Chris Fix level video and I consider him the best tutorial guy on all things cars usually on TH-cam and this was definitely up there on a par with his which is no mean feat! Hope you get loads of subscribers mate! 👍
Thank you so much for the kind words and support, I really appreciate it! Actually I've been doing videos longer than him lol. Just recently upgraded my camera too so my new stuff is now a better quality.
I'm also here because my e46 (in.the uk) is bubbling on the rear arch.
Did you ever do anything with yours?
Great presentation. How long would you estimate this all took in terms of work time? I am guessing it is a 2 day process overall?
Thank you! I would guess about 20hrs. My biggest issue is that I don't have a proper place to work so I waste a load of time taking out and packing up tools. Then I had to cover up the fender to protect it from the weather.
Best body restoration vid I've found so far! Thanks!
Thank you so much!
Dude that was super helpful and amazing work 🔥🔥
Great job... “ Clear” “concise” “detailed”
However, quick question ..,what is that you’re using for wax/grease remover?
Thank you! It's called "wax and grease remover", it's just a solvent like reducers but milder. There are different brands, but they also give the same results and go by the same name. Intended to decontaminate the surface while leaking no residue behind.
very detailed. thanks sir
Thank you!
That looked great when finished. I'll be following this video step by step when I go to do the fenders on my 98 k 1500! Thanks for the video
Thank you and happy to help!
That's a damn good budget repair. I plan to do the same but right after doing minor sanding on the fiberglass I'm going to hit it with bed liner because it is only a bush truck. Great video
I bought all the materials to do this and had planned to do it over the Christmas holiday... didn't happen so I figured maybe on the long weekend... maybe next long weekend!
Nice job, that turned out really well.
Thank you, I really appreciate the feedback!
This is an absolutely amazingly well made video. Thank you and congratulations. Superb.
Thank you so much for the kind words!
Awesome! Thanks for putting this together.
Good Job, This must have taken him a long time to do. He started off in a t-shirt and ended up wearing winter clothing. This tells you that this project will take time and patience.
Thank you! Lol, can be done in a weekend. I was doing this in my spare time over weeks and being in Canada, the weather can change pretty fast.
Good teacher-u-made it very easy to understand and learn-thank-you
Excellent to hear and thank you for the feedback :)
Thanks for this video. My sons truck needs this done. I've done some auto painting, clear coat & clear cutting & buffing but never any body work so this is going to be tricky for me but this video really gives me direction. Thanks.
No problem, happy to help :)
Amazon Tool Recommendations: amzn.to/3QrjM8c
Current retailers partnered with me & coupon codes:
eManualOnline website: shrsl.com/3vcz4
Coupon Code: 4DIYERS20 (20% off any order)
ECS Tuning Website: bit.ly/46tMpXP
Auxbeam website: auxbeam.com/?ref=4DIYERS
Coupon code: 4DIYERMR10 (10% off any order)
Teslong website: teslong.com
Coupon code: 4DIYERS (10% off any order)
Lanmodo website: shrsl.com/3vczf
Coupon code: LMD4DIYERS (Save $50 off order)
Auxito website: www.auxito.com/?ref=xR3VZnDW
Coupon code: 4DIYERS (15% off any order)
Headlight Revolution website: www.headlightrevolution.com
Coupon code: 4DIYERS (Free shipping on all US orders)
Great job. You have convinced me to never do this. So much work
Thank you! Haha, but hard work paid off and you get the satisfaction of doing it yourself ;)
Very nice job. I really don’t think you had to make so many excuses. That fiberglass will last forever. If you went to a shop you wouldn’t get anything different unless you asked for welded in new metal, which would double the price. It looks like that fender lip had already been filled. I think you did a real nice job but one tip : be a little more generous with the smoothing filler. I always use a long stroke from front to back following the contour of the body with the spreader. When you use the short top to bottom strokes after time you will see these lines even though you sanded it smooth. I’m not a pro but have been doing body work for years. Nice paint!!!!!!!
Excellent tips and thank you for the feedback! I've been trying to figure out if the truck was painted at one point. I can't find any tape edges, orange peal and paint fading was very consistent, color matches perfectly, no dirt or surface imperfections, no overspray, etc. The only thing I found was a small run towards the top of the door jamb. Factory flaw?
You did a great job thank you so much the teaching
Thank you :) Always happy to help!
looks Marvelous wish could have learned this method years ago looks like new in a tough area to shape
Nice work and helpful thanks for sharing new subscriber here
Thank you for the kind words and support :)
Awesome job!! Now I understand what mistakes I did haha
Thank you for the feedback :)
Wow those results are incredible
Thank you, greatly appreciated!
Very helpful, thank you 🎉