I bought the snapmounts and was excited to use them. After one year the main mount on the camera cracked while I was screwing the thumb screw. I never used them for any kind of extreme conditions but it still cracked. Wrote to Snapmounts and never got a response.
The only thing that’s prevented me from ordering a Snap mount in the past is the size of them. I wish they could find a way to make them just a little smaller and less bulky, it’s one more thing to carry around with everything. Nonetheless, I decided to give them a shot with the promo code so we’ll see if the practicality of it outweighs the size.
I think the practicality issue depends on how often you switch mounts. I have four mounts that I regularly switch between throughout the day, so for me, the added size pales in comparison to how much easier they make my life. Which mounts are you mainly using?
My friend's GoPro11 exploded on his head while he was playing with a ball. GoPro 11 cameras get very hot and may burn. Be careful this is a very dangerous video camera.
@@DavidManningvlog I agree, and I think I will like it. I just wish it was a bit smaller especially if I want to mount it to something like my helmet. Just looks a bit weird when I’m not using it. I mainly use it for snowboarding so my GoPro is usually on my helmet or selfie stick.
So stoked you like them Troy, thanks for picking some up! We really worked to make sure they were top quality! Wait until the hoodies come out man, they're going to be so rad🙌
The only thing I don't like about the snap mounts are that it makes the camera even more bulky for use on a helmet. It's a great concept, but I wish there was a way of doing it that didn't interfere as much with the profile of the camera.
I doubt it... I think the Mini is already a pretty niche product, so to build ecosystem for it is tough. It also makes more sense to use the Mini with the full size SnapMount (which it fits great), so that both my GoPro 11 and GoPro Mini can swap between all my different mounts
Sad I'm about to do a video about this same mount and don't have a great one to give because mine broke only after 2 months of use. Mine popped off my bike several times and finally flew off on a small bump and snapped in half. I love the functionality but I didn't have a great experience with mine.
Did you have it on a locking adapter on your bike? Anything action based, you should for sure be using a locking adapter. Magnets have great pull strength, but lack in sheer strength, meaning they can slide side to side against each other. So anything where you're going to be heavily bumping up and down, you need to have those locking adapters on there. If you had the locking adapter on and it came loose that would for sure be something to note!
@David Manning when I purchased the mount they didn't have that mount and I just learned about it through your video. I'm going to look into maybe getting that setup and give it another test. I really liked the mount and used it a lot a different spots on the bike. So I may have to give it another shot! Thanks for the reply Awesome Human!
I love my snap mounts. Learned about them from your channel awhile back. I recommend them to anyone that has a GoPro. I use the pro kit and the kit for the media mod.
Love my Snap Mounts! Haven't had the gopro out in a bit, been playin' around with a Pocket 2 buuuut when I do, it's snappy snaps all day. They're awesome! BTW, also used the phone mount bit for several months out in the mounts and it worked fantastically. I think I knocked it off the backplate ONCE, but that was my fault. Had a backplate attached to my backpack strap and thrust my arm out, smackin' the side of the phone hard enough to knock it off. But regular use, thing is epic.
Ohhhh, that's a clever use of the phone mount as like a POV shot! I'm usually using mine on my desk to watch videos then switch to my GoPro to go film. But man, this phone mount is beefy 🤣
@@DavidManningvlog POV and super easy access. The phone mount itself was on GoPro's Max Grip, doubling as a tripod for doing those little hiking bits where you walk past your camera and used as a selfie stick for talky bits or brol bits. Pull it off, record what ya need, slap it back on, keep hiking. Without ever needing to dig around in my pack for anything. Rode Wireless GO hooked up to it too. So yeah, all in one, easy on, easy off. Love em
I have owned snap mounts for my GoPro since they came out on the market. They are fantastic. I just received there bicycle mount and it is very robust and solidly designed. Mind you I don’t use on my bike, I use it on my tractor 🚜 👨🌾😁 and it works like a charm! Fyi - congrats on daughter no.3👧👧👧
Without realizing it, you probably made the best case for this item in advertently. When you were describing the parts and put the one piece down on the table and immediately grabbed the other piece. You really demonstrated the power of the magnets in one fell swoop, probably without even realizing. it was very funny to watch.
They actually have a specific MediaMod Snap Mount that you can pickup from their site. It has a bit more room so the MediaMod can lay flat in the mount👍
Yes... I use it for backpacking and hiking. I have a mount attached to a chest pack, I crawl over and under logs, bushwhack etc and have never had it come off my chest pack. I also have o mount on a trekking pole with the locking adapter and it works great.
Yes, I'm also waiting for them to make a magnetic chesty so that I can wear the chesty harness under the mtb jersey. I gotta look good when my riding skills are bad. hahaha
I've put them a few spots and been able to pull them off no problem. One of them came off and I was able to reuse the Snap Plate, but another one was on there really good, so when I removed the plate, it bent a bit
Got a snap mount kit cause of you! i was wondering what kind of tripod you use with the snap mounts? I got the GoPro 3 way tripod and the snap mount with GoPro is too heavy the head wobbles… not sure how to alleviate this?
I went snowboarding this past week and I said, I haven't ordered the snap mounts and it would be so much easier with them. I'll check their website but probably just order from Amazon. Also what is the gold colored arm on your suction mount? Is there a short aluminum fixed extension that you like? I have a 9" magic arm and it's rock solid but if there's one with the gopro feet you recommend it would be great. Thanks again Brian
Surprised that you didn't mention that Snap Mounts had to create the Media Mod adapter as the GP in the media mod doesn't fit well in the original standard mount.
I've purchased the snap mount pro kit a couple of months ago, because of you. They are indeed awesome. So easy to use, easy to swap between mounts. So simple and so great.
This is a nice mount for "sedentary" shoots / sports. But, for action sports, like whitewater kayaking or mountain biking, this mount leaves a lot to be desired and hope you don't lose the GP. Thanks for putting together these videos.
@@TobyNorthEN riding single track in Colorado and running class IV-V whitewater, the GoPro would be gone, even though I tether everything. I like this idea and would consider this mount if I were still working full time as a photographer shooting action sports, and always moving. But, like everything, it has limitations. But, it’s still a great concept and consistently think about picking one up.
@@DejanSmaic I want to ensure I understand your point. Are you saying the "locking" mount wouldn't survive these conditions or do you mean the base magnet mounted to the mode of travel (bike, kayak, canoe, etc.)? If you're referring to the magnet strength (base mount) I totally get the risk you're talking about. Hopefully, I'm making sense with my response/question. LOL. If not, my bad.
They should make one with a 1/4 screw that directly screws into a tripod mount. I don't get why they haven't made one yet. I hate using those GoPro tripod adapters. They always break and you need an additional thumb screw to make it work.
Been checking every day for a new video! I binge watched a ton of your videos before I realized who your wife is lol I am friends and grew up with a member of your wife’s band 😂 small world! Love your videos keep up the great work!
David, the ONLY thing I've come across with Snapmounts is they don't work (well) with 360 cameras. OR, at least not from my experience thus far. Does anyone have a hack/trick to keep the Snapmount from being visible in the 360 views? 5:33 - Lastly, the only thing I don't like (loose term) about the phone mount is that the "arm" isn't long enough to confidently accommodate holding a phone in the vertical (portrait) mode.
heey, man! Still watching your video, but wanted to get your perscpective, if possible.. if money is not an issue, would you prefer gopro or osmo action 3 to film street skateboard? I am debating wicht one to buy.. the main thing in favor of osmo action 3 is the field of view.. i haven't be able find exact numbers, but it seens the osmo action 3 has a wider field of view than the gopro.. this, for skate, is HUGE... the adventure combo, with the charging case is really a plus too.. haven't see your test about the 10bit osmo action 3 yet.. I specially interested in 4k+ 60 fps and 120 fps... for the gopro hero 11, apparentely the image quality is better.. and there is the 8x7 aspect (4k 60fps) which is a big plus too... how different is the field of view in 4k 120fps? is there a big difference in image quality between the two in this settings? sorry for the bad english :)
Cheers for all the GoPro Vids, super helpful! Do you happen to know why when you shoot Raw Photos and then go to download them from the GoPro media library (subscription storage) they only come back as a jpeg? I'd love to edit the raw file but I can't find it?
Please excuse my ignorance but what is a doom buggy (or whatever it’s called)? I got Snap Mounts after your first review of them and I love them too. Only thing that is a con (just a small con), they don’t fit on the Hero 9, 10, 11 properly. There are 2 things that stick out a bit and rub against the screen. Hasn’t scratched my screen but since the Hero 9, 10, 11 are a bit bigger than the Hero’s before, I wish they made them like half a cm to a cm wider that way the things that rub against the screen will be beside the GoPro. Anyways, Snap Mounts do rock. Might even buy the new one since I do a lot of off-roading electric bike riding. Super “dope” video. Learning your lingo, lol.
Hahaha! Not doom buggy, DUNE buggy. It's an off-road car specifically designed for sand dunes👍 Interesting to hear that your Snap Mounts are touching your screen. The two tabs on mine sit right outside the screen area and touch the side of the GoPro. Maybe reach out to Snap Mounts if it's causing any rubbing and they can help you out
Never heard of Snap mount before . But it looks pretty great. Need to find out if there is an european dealer, or if they ship to Denmark :-) Thanks for sharing this video
Thanks for watching in Denmark Jesper! Not sure if they ship to Denmark, but I'm sure their site can answer that. They're pretty impressive mounts to use!
Bought these last winter on your recommendation. They worked so well on the ski hill too. Stuck one to my jacket through a pocket and it stayed on even after a light tumble on the other side.
I love using them on my snowboard helmet! That way I can reach up while I'm on the lift and quickly pull it off to change settings or review footage. For sure use the locking adapter for snowboarding though👍
This is a pretty rad idea. The only thing I would add to your video is that the media mod requires a different snap mount sold separately. Thanks for sharing!
Always tough making these videos and trying to squeeze in everything. I filmed a segment where I mentioned the MediaMod Snap Mount, but it was four minutes long on its own, so it got cut in the final edit. So much info to share on these mounts🙌
Just like always I am liking it before viweing the video ;) You're the best ! I wanna see my fav camera guy create a video on DJI mini 3 pro. Would you please do that ? thanks ;)
Hey David! And he everybody else! Please help with this Go Pro situation I have! Whenever I connect the go pro to my computer, it says there are no files. Image Capture, Finder, and GO pro Legacy software. All say the same. However, when I remove the SD card and put in a card reader, they all detect the files. Any idea what's going on?
you're making me want a new GoPro! ;) and I already have a 4 & 6 that I don't use anymore. and an Insta360 Go 2 that I need to start using more often!🤦🏻♂🤷🏻♂ #alwaysneedmoregear
My shop looks like a SnapMount warehouse thanks to you and Snapmounts. So darn clever in everything they do. I think the locking snapmount should be the standard for everything. Buy a bunch of their extra long screw knobs and you'll never use another kind in your life. I didn't know about the handlebar mount. I should just link my bank account to them and let them do automatic pulls. -Tom
I think of it as a safety feature that it can come off if on my chest. I have asked them to make a chest mount so that it can be stealth under my jersey. But I throw a plate in my fanny pack and move from my chest to my pack and don't have to stop pedaling if I want to switch views quickly and with GoPros self leveling I can have the camera upside down on the chest then right side up on the pack or on a seat mount.
I got my snapmounts from your videos! Thanks again! Now, could i message u on insta, there is 1 thing on the phone mount im not suuper happy about. Happy holidays david!
I bought the snapmounts and was excited to use them. After one year the main mount on the camera cracked while I was screwing the thumb screw. I never used them for any kind of extreme conditions but it still cracked. Wrote to Snapmounts and never got a response.
Ooooh that mtb mount- yes finally a snap off !
Very cool system, but I’m going with the F22 since it’s got a mechanical lock, and it’s less bulky.
The only thing that’s prevented me from ordering a Snap mount in the past is the size of them. I wish they could find a way to make them just a little smaller and less bulky, it’s one more thing to carry around with everything. Nonetheless, I decided to give them a shot with the promo code so we’ll see if the practicality of it outweighs the size.
I think the practicality issue depends on how often you switch mounts. I have four mounts that I regularly switch between throughout the day, so for me, the added size pales in comparison to how much easier they make my life. Which mounts are you mainly using?
My friend's GoPro11 exploded on his head while he was playing with a ball. GoPro 11 cameras get very hot and may burn.
Be careful this is a very dangerous video camera.
@@DavidManningvlog I agree, and I think I will like it. I just wish it was a bit smaller especially if I want to mount it to something like my helmet. Just looks a bit weird when I’m not using it. I mainly use it for snowboarding so my GoPro is usually on my helmet or selfie stick.
I love my snap mount ! You made me want to buy the kit and it's worth the money.
Oh and I got my shirts and they are QUALITY!!! Super thick and comfy. Love it.
So stoked you like them Troy, thanks for picking some up! We really worked to make sure they were top quality! Wait until the hoodies come out man, they're going to be so rad🙌
The only thing I don't like about the snap mounts are that it makes the camera even more bulky for use on a helmet. It's a great concept, but I wish there was a way of doing it that didn't interfere as much with the profile of the camera.
Will snap mounts make something for the mini?
I doubt it... I think the Mini is already a pretty niche product, so to build ecosystem for it is tough. It also makes more sense to use the Mini with the full size SnapMount (which it fits great), so that both my GoPro 11 and GoPro Mini can swap between all my different mounts
Sad I'm about to do a video about this same mount and don't have a great one to give because mine broke only after 2 months of use. Mine popped off my bike several times and finally flew off on a small bump and snapped in half. I love the functionality but I didn't have a great experience with mine.
Did you have it on a locking adapter on your bike? Anything action based, you should for sure be using a locking adapter. Magnets have great pull strength, but lack in sheer strength, meaning they can slide side to side against each other. So anything where you're going to be heavily bumping up and down, you need to have those locking adapters on there. If you had the locking adapter on and it came loose that would for sure be something to note!
@David Manning when I purchased the mount they didn't have that mount and I just learned about it through your video. I'm going to look into maybe getting that setup and give it another test. I really liked the mount and used it a lot a different spots on the bike. So I may have to give it another shot! Thanks for the reply Awesome Human!
I love my snap mounts. Learned about them from your channel awhile back. I recommend them to anyone that has a GoPro. I use the pro kit and the kit for the media mod.
Love my Snap Mounts! Haven't had the gopro out in a bit, been playin' around with a Pocket 2 buuuut when I do, it's snappy snaps all day. They're awesome!
BTW, also used the phone mount bit for several months out in the mounts and it worked fantastically. I think I knocked it off the backplate ONCE, but that was my fault. Had a backplate attached to my backpack strap and thrust my arm out, smackin' the side of the phone hard enough to knock it off. But regular use, thing is epic.
Ohhhh, that's a clever use of the phone mount as like a POV shot! I'm usually using mine on my desk to watch videos then switch to my GoPro to go film. But man, this phone mount is beefy 🤣
@@DavidManningvlog POV and super easy access. The phone mount itself was on GoPro's Max Grip, doubling as a tripod for doing those little hiking bits where you walk past your camera and used as a selfie stick for talky bits or brol bits. Pull it off, record what ya need, slap it back on, keep hiking. Without ever needing to dig around in my pack for anything. Rode Wireless GO hooked up to it too. So yeah, all in one, easy on, easy off. Love em
I have owned snap mounts for my GoPro since they came out on the market. They are fantastic. I just received there bicycle mount and it is very robust and solidly designed. Mind you I don’t use on my bike, I use it on my tractor 🚜 👨🌾😁 and it works like a charm! Fyi - congrats on daughter no.3👧👧👧
would you recommend it on my helmet while dirt biking? it might hit on trees
I’ve owned a Snap Mount for a couple of years. It’s an awesome accessory!
Without realizing it, you probably made the best case for this item in advertently. When you were describing the parts and put the one piece down on the table and immediately grabbed the other piece. You really demonstrated the power of the magnets in one fell swoop, probably without even realizing. it was very funny to watch.
Can you use Snap Mount when your GoPro is in the Media Mod or in another cage (the Ulanze G5-9 for example)?
They actually have a specific MediaMod Snap Mount that you can pickup from their site. It has a bit more room so the MediaMod can lay flat in the mount👍
Do you think snap mounts would be strong enough to put on a chest mount for mountain biking? Thanks.
They do a more robust version that has a locking mount as well.
Yes... I use it for backpacking and hiking. I have a mount attached to a chest pack, I crawl over and under logs, bushwhack etc and have never had it come off my chest pack. I also have o mount on a trekking pole with the locking adapter and it works great.
Yes, I'm also waiting for them to make a magnetic chesty so that I can wear the chesty harness under the mtb jersey. I gotta look good when my riding skills are bad. hahaha
Snap mount or the f22 dji adapter if you could only have one?
I love my SnapMounts.! They are definitely the best investment for a GoPro user.
Love my Snap mounts. I bought a second set
Love hearing that Carrie!
So how easy is it to remove the snap plate? It might solve my problem
I've put them a few spots and been able to pull them off no problem. One of them came off and I was able to reuse the Snap Plate, but another one was on there really good, so when I removed the plate, it bent a bit
Ordered! Had to go back and make a second order for the bike mount.
David do you have gimbal you prefer for gopro?
David - will the Snapmount for the iPhone 14ProMax fit the phone when it is in an OtterBox case?
Have you done a video of the bike mount with locking plate and review it to see how it handles?
Really a go pro floaty should be used for any water based activity besides vlogging in rain
How does the SnapMount compares to other alternative like the Ulanzi GP-4 Magnetic Quick Release system? The Ulanzi one looks much smaller.
I sold Snapmounts for Ulanzi Magnetic mounts. For me they are just better, because they are smaller and you can use them on invisible selfy stick.
@@jernejkokelj Is the Ulanzi magnetic mount secure enough to be used on mountain biking?
@@scoutfai Yes it is, I use it all the time on MTB.
Got a snap mount kit cause of you! i was wondering what kind of tripod you use with the snap mounts? I got the GoPro 3 way tripod and the snap mount with GoPro is too heavy the head wobbles… not sure how to alleviate this?
Dumb question. Does it work with the Media Mode? Thanks.
SnapMount website shows they're only compatible up to GoPro Hero 10...I'm assuming it would be compatible with the GoPro Hero 11 also...right?
Yep, Hero 10 and 11 are the exact same physically. I'll reach out to Snap Mounts to see about updating their site👍
I went snowboarding this past week and I said, I haven't ordered the snap mounts and it would be so much easier with them. I'll check their website but probably just order from Amazon. Also what is the gold colored arm on your suction mount? Is there a short aluminum fixed extension that you like? I have a 9" magic arm and it's rock solid but if there's one with the gopro feet you recommend it would be great. Thanks again Brian
Surprised that you didn't mention that Snap Mounts had to create the Media Mod adapter as the GP in the media mod doesn't fit well in the original standard mount.
Yeah, they offer both options! If you're rocking a MediaMod, you for sure want that mount👍
Thanks for putting me on this! Getting my first go pro and definitely answered my question about accessories!
It is the best thing ever!
Please have GoPro enable preview while recording on gopro 9 - 10 🙏
I still love my snap mounts.
I've purchased the snap mount pro kit a couple of months ago, because of you. They are indeed awesome. So easy to use, easy to swap between mounts. So simple and so great.
Love hearing that Joost! Such a game changer for multiple mounts🙌
This is a nice mount for "sedentary" shoots / sports. But, for action sports, like whitewater kayaking or mountain biking, this mount leaves a lot to be desired and hope you don't lose the GP. Thanks for putting together these videos.
Maybe you missed this part at 2:54. I have these, and have been on questionable "roads" with no issues.
@@TobyNorthEN riding single track in Colorado and running class IV-V whitewater, the GoPro would be gone, even though I tether everything. I like this idea and would consider this mount if I were still working full time as a photographer shooting action sports, and always moving. But, like everything, it has limitations. But, it’s still a great concept and consistently think about picking one up.
@@DejanSmaic I want to ensure I understand your point. Are you saying the "locking" mount wouldn't survive these conditions or do you mean the base magnet mounted to the mode of travel (bike, kayak, canoe, etc.)?
If you're referring to the magnet strength (base mount) I totally get the risk you're talking about. Hopefully, I'm making sense with my response/question. LOL. If not, my bad.
What selfie sick do you use and does the Snapmount fir the Gopro 11?
Which is the stick you use at the end of the video?
They should make one with a 1/4 screw that directly screws into a tripod mount. I don't get why they haven't made one yet. I hate using those GoPro tripod adapters. They always break and you need an additional thumb screw to make it work.
I’m looking for a gimbal that utilizes the snap mount and can mount a GoPro and/iPhone 14 pro max
Snap mount and media mod makes you put the bolt in on the wrong side according to the media mod cut out.
Thanks David for this awesome breakdown of SNAP Mounts! We're just as much a fan of yours as you are of our products!
Keep the clever product ideas coming! You've made my life significantly easier when I go out filming🙌
Plaese, add the PayPal option on your online shop. It will be awesome! Thank you.
Any new discount cupons?
Team will your Snapmount for the iPhone 14ProMax fit the phone when it is in an OtterBox case?
Been checking every day for a new video! I binge watched a ton of your videos before I realized who your wife is lol I am friends and grew up with a member of your wife’s band 😂 small world! Love your videos keep up the great work!
Oh no way dude, that's rad Josh! Who was it that you grew up with?!
Reuel
@@Imjoshuabailey Oh man, I'm so sorry for you Josh... Hahhaa! Kidding kidding, love Reuel!
@@DavidManningvlog hahaha 🤣
Do they offer a tether?
David, the ONLY thing I've come across with Snapmounts is they don't work (well) with 360 cameras. OR, at least not from my experience thus far. Does anyone have a hack/trick to keep the Snapmount from being visible in the 360 views?
5:33 - Lastly, the only thing I don't like (loose term) about the phone mount is that the "arm" isn't long enough to confidently accommodate holding a phone in the vertical (portrait) mode.
Love their mount that allows you to use the media mod with it! I think we own everything they offer!
heey, man!
Still watching your video, but wanted to get your perscpective, if possible..
if money is not an issue, would you prefer gopro or osmo action 3 to film street skateboard?
I am debating wicht one to buy..
the main thing in favor of osmo action 3 is the field of view.. i haven't be able find exact numbers, but it seens the osmo action 3 has a wider field of view than the gopro.. this, for skate, is HUGE...
the adventure combo, with the charging case is really a plus too..
haven't see your test about the 10bit osmo action 3 yet..
I specially interested in 4k+ 60 fps and 120 fps...
for the gopro hero 11, apparentely the image quality is better..
and there is the 8x7 aspect (4k 60fps) which is a big plus too...
how different is the field of view in 4k 120fps? is there a big difference in image quality between the two in this settings?
sorry for the bad english :)
Been looking for a lanyard system to keep my cellphone safe while kayaking with no luck till now. Thanks!
is it compatible with go pro hero 11 black doesnt mention this on website?
Cheers for all the GoPro Vids, super helpful! Do you happen to know why when you shoot Raw Photos and then go to download them from the GoPro media library (subscription storage) they only come back as a jpeg? I'd love to edit the raw file but I can't find it?
Love my Snap Mounts....love them even more now that I have the one that works with the Media Mod!!!!
Hey david. Can Snap Mounts be used for other action cameras (like Insta360 One R) as well or only GoPro?
What about moto helmet, have mount?
Yep, I have a Dango mount on my MTB helmet and a sticky mount on my MX helmet with a Snap Mount on each!
@@DavidManningvlog thx for quick response, could you please share link on your video?
I’ve been trying to think of a way to attach the GoPro to the peep hole on the inside of the door so that we can record
I don't the the handlebar adapter will fit a lot of handlebars.
SNAP mounts are cool but WHEN WHEN??? ARE YOU MAKING A VERTICAL view mount?????
Please excuse my ignorance but what is a doom buggy (or whatever it’s called)? I got Snap Mounts after your first review of them and I love them too. Only thing that is a con (just a small con), they don’t fit on the Hero 9, 10, 11 properly. There are 2 things that stick out a bit and rub against the screen. Hasn’t scratched my screen but since the Hero 9, 10, 11 are a bit bigger than the Hero’s before, I wish they made them like half a cm to a cm wider that way the things that rub against the screen will be beside the GoPro. Anyways, Snap Mounts do rock. Might even buy the new one since I do a lot of off-roading electric bike riding. Super “dope” video. Learning your lingo, lol.
Hahaha! Not doom buggy, DUNE buggy. It's an off-road car specifically designed for sand dunes👍 Interesting to hear that your Snap Mounts are touching your screen. The two tabs on mine sit right outside the screen area and touch the side of the GoPro. Maybe reach out to Snap Mounts if it's causing any rubbing and they can help you out
Never heard of Snap mount before . But it looks pretty great. Need to find out if there is an european dealer, or if they ship to Denmark :-) Thanks for sharing this video
Thanks for watching in Denmark Jesper! Not sure if they ship to Denmark, but I'm sure their site can answer that. They're pretty impressive mounts to use!
Does anyone know what grip he uses when talking about the "I dont use it in water" section?
If any band can produce a GoPro - DJI action 3 magnetic mount adapter or cage, I will definitely buy it.
Hi David. Thx for sharing your expertise on this. Clearly some good stuff to have ..😉
I’ve never liked this snap mount design.... whereas DJI Action 2/3 magnetic mount is perfect.
Anyone use snap mounts on vehicles going off-road?? Is the magnetic connection strong enough to the keep the GP attached?
Bought these last winter on your recommendation. They worked so well on the ski hill too. Stuck one to my jacket through a pocket and it stayed on even after a light tumble on the other side.
I love using them on my snowboard helmet! That way I can reach up while I'm on the lift and quickly pull it off to change settings or review footage. For sure use the locking adapter for snowboarding though👍
@@DavidManningvlog I am definitely getting the locking adapter this year. 😅
Awesome!
This is a pretty rad idea. The only thing I would add to your video is that the media mod requires a different snap mount sold separately. Thanks for sharing!
Always tough making these videos and trying to squeeze in everything. I filmed a segment where I mentioned the MediaMod Snap Mount, but it was four minutes long on its own, so it got cut in the final edit. So much info to share on these mounts🙌
Just like always I am liking it before viweing the video ;) You're the best ! I wanna see my fav camera guy create a video on DJI mini 3 pro. Would you please do that ? thanks ;)
Well it sounds like YOU'RE the best! Thanks Mritunjay, you rock!
@@DavidManningvlog YO David !😊😊 please make a video on DJI mini 3 pro.....
I hope you making money on these, because every time I see a video that you talk about snap mounts you sell them to me lol
Another great one David.
Would you trust snapmounts on a motorcycle?
Happy holidays to you and your family.
Hey David! And he everybody else! Please help with this Go Pro situation I have! Whenever I connect the go pro to my computer, it says there are no files. Image Capture, Finder, and GO pro Legacy software. All say the same. However, when I remove the SD card and put in a card reader, they all detect the files. Any idea what's going on?
I use Snapmount all the time! Thanks to you David! Love their stuff.
DAVEEE🙌🙌🙌
Abhijeet in the house!
you're making me want a new GoPro! ;) and I already have a 4 & 6 that I don't use anymore. and an Insta360 Go 2 that I need to start using more often!🤦🏻♂🤷🏻♂ #alwaysneedmoregear
Just one down side is the weight.
We all have that cool spot in our Dune buggies.... lols.
Your a good sales person ngl 😅
It will be awesome if they let us pay with PayPal and not only with credit card..
My shop looks like a SnapMount warehouse thanks to you and Snapmounts. So darn clever in everything they do. I think the locking snapmount should be the standard for everything. Buy a bunch of their extra long screw knobs and you'll never use another kind in your life. I didn't know about the handlebar mount. I should just link my bank account to them and let them do automatic pulls. -Tom
This bike mount has been out for quite some time (probably without their brand printed on the side). It's solid and a good addition to their line.
much too big otherwise just use Quick Lock 2
I think of it as a safety feature that it can come off if on my chest. I have asked them to make a chest mount so that it can be stealth under my jersey. But I throw a plate in my fanny pack and move from my chest to my pack and don't have to stop pedaling if I want to switch views quickly and with GoPros self leveling I can have the camera upside down on the chest then right side up on the pack or on a seat mount.
I've been looking into those and wondering if they really are as good as advertised. Thanks for the video and convincing me the hype is real!
Ended up grabbing two sets from them because of you
ended up winning their giveaway for the GoPro 11 mini
Thank again David!
SnapMount have solved everyones problem here... this is sooooo clever
I got my snapmounts from your videos! Thanks again! Now, could i message u on insta, there is 1 thing on the phone mount im not suuper happy about. Happy holidays david!