Sovol SV01 Pro - 3D Printer - Unbox & Setup
ฝัง
- เผยแพร่เมื่อ 19 พ.ค. 2022
- Sovol SV01 Pro
Official: sovol3d.com/products/sv01-pro...
Amazon: geni.us/fRxJ
Recommended: geni.us/JustVlads
Puzzle STL: www.thingiverse.com/thing:534...
SV01 Pro Direct Drive 3D Printer Auto Leveling Silent Board 280*240*300mm/11.02* 9.45*11.81 inch
Model: SV01PRO
Interface Language: English
Print Size: 280mm*240mm*300mm
Build Plate Size: 300mm*255mm
Print Method: TF card, USB connection
Layer Thickness: 0.1-0.4mm (Adjustable)
Nozzle DIameter: Standard 0.4mm ( Adjustable)
Recommend Print Speed: 50-80mm/s
Nozzle Temperature： ≤260c
Bed Temperature: 110c
Support Material: TPU, PLA, ABS, PETG, WOOD
Material Diameter: 1.75mm
Support File Format: G-code
Machine Size: 520mm* 509mm* 647mm
Machine Weight: 9.8kg
Package Size: 569mm*559mm*231mm
Package Weight: 12.9kg
Voltage: input 115v/230v50/6Hz Output 24v
Operation System: Windows/ Mac/Linux
Power:350W Creality Power Supply
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads.com/ - วิทยาศาสตร์และเทคโนโลยี
![[TH] VCT Masters Shanghai Playoffs - Grand Finals // GEN vs TH](http://i.ytimg.com/vi/HL-hhLrtctw/mqdefault.jpg)
New Channel: www.youtube.com/@Just_Print
SV01 Pro: geni.us/fRxJ
Recommended: geni.us/JustVlads
Your reviews are the absolute best ! You don't waste time tightening screws in real time but you dive deep where it matters. A very valuable review before I jump into my first printer purchase. Thank you ! Great job 👏. ... 🇬🇧
great video. I don't know anything about 3d printing. That being said, I bought this printer a week or so ago. I was nervous due to my lack of knowledge. I have to say, it has been a dream. I assembled it with no issue, levelled the bed, which was easier than I was expecting, and then printed out the files included, with zero issue. The little Benchy boats turned out so cute. I still have no idea what I am doing, but I am totally hooked. Im just grateful for the geniuses who paved the way for me to be able to do this!
This is an amazing video.. your attention to detail is appreciated and I can say that this is a model I've been looking at for my first printer and I can honestly say I can confidently make a purchase and know the setup and/or parts. Can't wait. And again thank you for the video!
Just received mine a couple of days ago. Haven't unboxed it yet. Sick wife, taking care of the house, you know: life. Cannot wait. Second time watching video. First 3d printer. Thank you!
This is a really good video! Plenty of information, very little waffle and all the important stuff covered. It also helped me set up the levelling on my own Sovol SV01 Pro so thank you!
Thanks for this beginners video. I just ordered my first 3D printer and cant wait to get this Pro out of its box and printing.
At first great presentation! For second is the best ender clone printer I ever see until now. It has all the mistakes I am trying to fix in my Ender pro already fix!!!! Impressive for a smaller company then Creality is!!! And did ALL the thinks that Creality dont , great!!! I wish I had this one from the start. Great work Sovol !!! Great work Vlad too !!!
Thank you for another great full review. Now I know what to buy for the new year. Also I now have subscribed. Good Christmas to you and Happy New Year.
Bought mine yesterday while the 3rd anniversary sale was going. Can't wait for it to get here. Will be used primarily for tpu. Awesome video, very informal. You made it entertaining and easy to watch, awesome video
Hi ! Would you have any feedback of this printer ? I assume you're using it for tpu parts for FPV purposes, so I would like to know how it performs 😉
@@miloperriand8238 been busy at work. Haven't had a chance to fly calibrate it yet. But I ran some figurines for a kid with pla and it did very well. Very nicely build 👌🏼. Hopefully I can finish calibration tomorrow, I'm backlogged on action 2 mounts for my whole fleet
You’re the joe pera of 3d printing and I mean that in the best way possible
It has some of the features that the Ender 3 S1 has. Thanks for the video.👍
"run our cable where it's happy"
I don't know but I love that. 😂
Thanks a lot! Your video really helped me, set up my 3D printer correctly. Otherwise I probably would've struggled much longer 😄
very interresting indeed and metal peices also
Great review. Much appreciated
Waiting for mine to arrive next week 😊
Very nice review. I've watched several of your reviews all the way to the end witch really happens to me with long TH-cam videos. Nice job! I just want to start in 3D printing and what did you recommend, this printer ot Ender 3 v2 neo?
I use this Printer since it is out now and i love this Printer. With the right settings the Prints look awesome. The only Downside for me is this Loud Nozzle Fan. I would change it but didnt find a Solution for tha. Mabey someone has an Idea. Great Video Thumbs up.
great video
Hello. Thanks a lot for your video. Were you able to resolve these minor stoppages at the time of printing? Example of the golden rocket. Thank you for your attention.
These arent a bad printer. I spent extra time setting mine up for the first print (calibration cube). I took the bed off to adust the eccentric nuts, put it back on once the Y axis was smooth, checked all my belt tensions, adjusted the X axis nut, preheated the bed then went around it 6 or 7 times with a piece of thermal reciept paper as a guide. Do it right and auto bed level will come with a delta of 0.18-0.15. My calibration cube came out WONDERFUL. Now I am waiting on my benchie to finish printing. From start to finish, setup took around an hour from unpacking to first print.
Are you still happy with the printer ?
I've made my decision. Thank you.
Very helpful video! I've had mine for a few weeks but just recently my prints haven't been that good, turns out my home command in cura didn't have g29 in yet lol!
are the vibrations caused by the filament holder on top of the printer? would it be better if it was level on the desk?
best print i have ever seen so far on my research, it comes to N1 on my list. for $268.00 . i think is a good price
Just a heads up. I'm currently setting mine up for the first time too. First 3D printer. That step where he loosens the rolling wheels underneath the plate is pretty much impossible the way he does it in the video as the supplied wrench is too short to reach. If you spin the big wheels until they fall off, you can lift off the top plate. Careful not to lose the springs. Then use the small end of the wrench to turn the top nuts, while putting a finger on the hexagonal bit underneath. Works much better.
Genius thx
Beautiful camera shots in the beginning. What camera/lens did you use for some of the “through” shots? Is it just a zoom and crop? Good stuff.
Ah. I just saw a GoPro in some shots. Assuming that was the culprit.
Actually, GoPro was only for time lapses. The up close shots in the intro were filmed with the Laowa Probe lense: geni.us/xb4tJF
@@JustVlads Oh you Savage. Well it came out beautiful. That lens is well worth the $$$. Thanks for taking the time to reply.
is the sovol sv01 pro able to change filament mid print??? and if it is, can it only change filament on layer by layer or can it do multiple colours per layer?
any idea how to remove the stepper from the assembly? mine died after 3 months. i've pulled out every screw i can find and it's still affixed so tightly that I wonder if it's glued on...
Great!
so is there a power loss issue on vase mode fix? btw, great video
This video might help: th-cam.com/video/3E54qX77__Q/w-d-xo.html
Should the nozzle and bed be heated for leveling? Or just the bed?
Sovol sv01 pro vs Ender 3 s1 pro. Which one is better?
Did you ever figure out why it printed that extra ring around the uhhh cube and benchy?
Thank god for this video. The supplied documentation has got to be some of the worst crap I have EVER encountered.
Random question, What is the song in the intro withing the first 2 min?
I just got this printer. Set it up and did a benchy as a test and it's getting all sorts of jank. Bumpy layer lines. It even sounds like the motor is grinding when its printing a layer. Anyone one know how to trouble shoot or know of any recourses to help fix this? This is my first printer so I don't want this frustration to discourage me.
Is there a link to the spaceship I wanna print this on mine
Hello,
Could we find the files for the models in this video anywhere ? Thanks.
Hey, do you know how to fix this issue? i am unable to slot the gantry onto the machine base as demonstrated at 7:00 . Only one side at a time can slot down at all, with the other caught on the very edge of the printer.
Hi,
I had the same problem. Lifting the extruder bar all the way up (and loosening the top screws too) fixed the problem for me. And I was thinking the height of the extruder should not matter, because they are supposed to be parallel ... But that's just ideal theory. But you might have solved it by now.
I love my Ender 3 v2 but this seems to be a great printer for $300.
The power supply is installed separately from the Mainboard, so one does not heat up the other. Nobody should claim that it is an Ender, rather a Creality clone. A clean print out of the box.
🔥💕👌👍
Doesn't look like a bad little printer at all. Just replace the power supply with a mean well and replace the crapality board with a TH3D Studios ez-board and you're gtg.
What is the benefit to those mods and do you have links? Fairly new to all this and always appreciate helpful tips
@@aceman1126 Mean Well power supplies are very good quality. I checked mine and it had one already from the get go - seems its a crapshoot as to weather you get a Creaility or Mean Well.
I doubt that anyone will see this, but my gantry just won’t for the life of me fit into the base and idk what to do
Every printer is just sort of a clone ender 3. No innovations sadly :(
And that’s why the positron v3 project is so great.
@@ernestryles Oh, I didn't know about that one.
@@Orgruk It’s a fairly small project, but the creator just released it fully open source. His video is great! I highly recommend watching.
@@ernestryles Yeah exactly, that's why I wrote this comment. I watched the video. If one person with almost no resources can do such a thing a the multimillion company's what can they achieve?
@@KerimKero1903 they could do a lot, there’s just not much incentive to innovate in the hobby space. Ender 3 clones all work well enough for most people. They’re also very easy to manufacture. If they can keep on selling more of the same, they’re going to do just that. I’m really hoping a company actually manufactures the positron. If they do, it might help cause a push towards innovation, and that would be great to see.