Elegoo Neptune 3 Pro - 3D Printer - Unbox & Setup
ฝัง
- เผยแพร่เมื่อ 10 พ.ย. 2022
- Amazon Links
Buy Neptune 3 Pro: geni.us/vzwO
Recommended: geni.us/JustVlads
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225x225x280mm
Dual-Gear Direct Extruder
The new dual-gear direct extrusion mechanism with 3:1 reduction ratio and strong extrusion force for smoother filament extrusion and more stable & accurate printing, greatly reducing nozzle clogging risk and under extrusion issues. Compatible with flexible filaments such as TPU, printing size: 225x225x280mm.
Auto Bed Leveling
The non-contact high precision sensor automatically scans the hotbed at 36 points and collects data in real-time, and then compensates for any irregularities and unevenness of the printing bed by automatically adjusting the Z-axis height to ensure a smooth and consistent first layer.
PEI Magnetic Platform
PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that the prints can be easily released or popped off by bending the print steel sheet. All axes of the ELEGOO Neptune 3 Pro adopt silent stepper motor drivers for quieter and precise movement, which ensures silent printing and reduces the noise down to 50dB.
Z-axis Dual Lead Screw
The dual synchronized lead screws and dual-motor drive make the movement of the print head along the Z-axis more stable and accurate during the printing process, avoiding the printing deviation driven by a single Z-axis lead screw motor. The printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.
Removable Capacitive Touchscreen
The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function, you can preview the model image before selecting the print model, and observe the printing progress by previewing the real-time comparison image.
As an Amazon Associate I earn from qualifying purchases
New 3D Printing Channel: / @just_print - วิทยาศาสตร์และเทคโนโลยี
New Channel: www.youtube.com/@Just_Print
Neptune 3 Pro: geni.us/vzwO
Recommended: geni.us/JustVlads
Subscribed
I wanna buy into India Karnataka help me please
Subscribed successfully 😅👍 my support to you always bro
I just orderd mine, can’t wait to print! This will be my first 3d printer
Where'd you ordered it from? Apparently it's sold out everywhere
@@O-RoD I bought it from a dutch reseller. But it’s sold out there aswell. Next batch will be 6th of January it says
@@SovietCaptain03 thanks for the info! I'll keep an eye out
@@O-RoD no problem!
I ordered mine half a week ago, just shipped out today hopefully will be here on wednesday, i read many bad reviews about the dutch retailer (im dutch myself) so didnt order it there, just ordered it on the elegoo site as soon as i saw a restock (happens quite often but sells out in like an hour or two)
I knew I made a good purchase. This video confirmed all my research AND more. Thanks for uploading it. I got my mars pro about 2.5 years ago now and I've loved elegoo ever since and this printer showcases exactly why. The engineers at Elegoo are really upping the ante, and putting other manufacturers to shame with every new release.
This will be my first 3D printer thanks to your advices. Thank you so much for taking the time to instruct us!
@justvlad Thanks for the gift!! I'm so happy about it! Just amazing!!!✌
justo me la acabo de comprar y estaba mirando videos y eso, que tal te va?
@@7771717since it’s been a year how is your 3d printing journey going? I want to get started but I’m not sure if it’s worth the money or not
Solid vid! I was confused as to why my machine had a slight wobble after assembly, you helped greatly! I'll be sure to link people to this setup guide. You did a great job explaining everything I missed in my first impressions stream.
Just got my machine yesterday and I'm using the steps you showed to set it up. Thanks for a thorough video.
bought one this morning. I knew your review wouldn't disappoint. in fact I'm that much more excited to get it!
Looks like this will be my first 3d printer, after watching this video, no more of my questions were left. Thanks mate
Thank you so much for this great video! You got my daughter and I up and running and enjoying her Christmas present immediately! Including the software settings was especially awesome of you. We made a Benchy with your settings and one with the Normal default settings and yours came out a lot better while using less material. Thanks again!
Hope you have a happy New Year!
is your printer still working well
Thank you so much! I installed whole setup and printed my first model with this video, loved how detailed you explained everything
Awesome job! I got lucky and have someone locally who got the pro by accident instead of the plus so I’m grabbing it from him Tuesday. Your video was one of the best I’ve come across, so great job again!
Thank you man this helped me a lot mine just came in today and it only took me about 45 minutes to get it up and printing and i was going super slow and double checking things, the budah print is looking CLEAN so far, was literally instant set up and go
Just set up my first printer along side this video thanks for all the help
Just ordered. It's my first printer. I hope I don't have any problems. Thanks for the great video!
edit.The printer arrived today. Assembled in 20 minutes (it's easy), calibrated the plate, lowered the z axis slightly and sent the little Buddha to print. It turned out fantastic!!!!
Great video! Its the first 3D print video I've seen and makes me confident in being able to set up my Elegoo that just showed up today! Thanks for making such a detailed video!
Nice! My cousin actually turned me on to this printer. Can’t wait to pick one up since I already have an older printer that I’ve been meaning to upgrade from.
received mine today and this video was great help! Looking forward to more of your content
Mine just arrived! Thanks a lot! Setup was easy with your instructions! Buddha is half way done
Thanks. Got mine yesterday. Only 2 days shipping. I'm rgoing into my shop right now to adjust the belts and rollers er your video. Then I will calibrate and do a test print. This is my first printer.
i have ordered this printer. I was so lucky to find your vidio, and i have to say that this was one of the best complete and informative vidios i have ever seen.WELL DONE
My first 3D printer. Thanks so much for the overview, I wish I could get these for every product I buy.
Such a beautiful machine! I'm quite excited for when mine to come in!
Thank you so much for this video. My Neptune 3 Pro will arrive this week and it's my first 3D printer. I feel well prepared because of this video.
Just got mine and followed your video, Buddah came out Perfect! Thanks!
I don't know if anyone looked close enough to the motherboard but, it is fully up-gradable for dual extruders! All sockets with pins outs are populated, so that means if you know what your doing you can up-grade this to a dual. there are 3 fan outlets and they are compatable with a 12/24v option, just set the jumper pins. there is added connector already there for the hot end of the extruder #2.
Great video as usual. You keep it very educational 👍🏻
Regret not coming across this review before i bought my ender 3 neo. The neptune pro is dope
Vielen Dank für Deine gründliche Vorstellung. Du hast mir sehr geholfen eine Entscheidung zu treffen. Viel Freude beim Drucken.
this video helped me and my dad so much i dont know what we would have done without you thank you so much have a great day
hey, how the 3 pro for you so far, im stuck on this or the base 4 Neptune, but I dont know if I should go for that due to the issues reported with the Neptune 4 max as im worried ill have those same issues with the 4 so im thinking of maybe the 3 pro
The Neptune 3 pro is easy to setup and great quality and so far I haven’t had any issues with it I would highly recommend
It’s great for experienced people and beginners
This printer looks great! It will be my first printer, so thanks for going over it. Absolutely great video! New sub.
how good is it might buy one
Great video... Some great tips on assembly and excellent job explaining things. I've liked and subbed
Thank you so much. This helped me box the printer again and send it back!
Cool printer and quiet hope some day I get a chance to get one.
Just purchest it yesterday. Now im really looking forward to it. Should come in 2 days ^^
Ordered one of these ! Just going to watch your video as i set mine up 🤣 screw the manual ! Lol thanks man appreciate ya !
Thank you very much. Very well put out video.
I'm dying to have your cura settings (especially supports) they're perfect
@JustVlads Thank you for these amazing reviews! I have also seen your other review about the Ender 3 S1 - and i'd like to ask for your advice! I am planning to buy my very first 3D printer and i don't know which one to choose. Would you recommend the Neptune 3 Pro or rather the Ender 3 S1? Or maybe something else in this price range? Thank you very much!
Wow, very impressive!
I just ordered one. Hurray for me!
Wow, what an awesome video!!
Thanks for making this video and thanks for sharing!!!
Amazing test!
Your videos helped me set mine up. Couple skips over but that could just be my OCD when it comes to setting things up. For the fan which was one of them when or should it be enabled. ? Thanks and really informative and not to fast setup videos. Thanks.
I purchased a Creality Ender 3 V2. The setup was a complete disaster. Also I was never able to print with that printer. Creality support is a real joke even from Shenzen. I prepared a video on TH-cam for the encounter.
Now I purchased a ELGOO 3 Pro. What a huge difference. Your video was very helpful even though the manual was limited in instructions. Creality Ender took me about 15hrs to assemble. This Elgoo took me about 1 hour. Installing the last part which was the cable holder made me realize that I put the frame on backwards. No big deal. Took the 4 screws off and reset to the proper place. Initially I was very skeptical because when the box arrived, I noticed it was also from China in Shenzen. Was I in for another disaster? So far I am impressed.. I haven't printed yet but I do not forsee any problems. Enough for now and anxious to start printing. Good job on the video.
BOY!!! was I wrong.....Turn power on and said booting for 2 seconds and then screen went blank. Now if I power off and on, I just get a black screen. Looks like another disaster. Even the scan disk is blank..and I do not get connection to computer. I wonder what is going on in Shenzen, China..!!
Received my Neptune 3 Pro yesterday and put it together today. Currently printing a XYZ cube after Buddha. Overall it's a nice little printer for the price. However it appears that they are in a rush to get them out the door. The bed was quite loose and had to be adjusted. The print head was also loose and had to be adjusted. The X&Y belts also were loose. The belt at the top for the Z axis is very loose and there is no adjustment for it. It's quite useless for keeping the Z axis tied together. But after adjusting everything it seems to work quite well so far. Can't be beat for the price.. Gerry
Printed a benchy and a Axolotl after words and both came out great. This printer runs very well at 60mm/s...
would you print any faster?@@gerardwiesel559
POWERLOSS SAVING!! thank you.. holy crap that was causing me so many issues even on the benchy.
Does it do a 36 point autolevel before each print or just when you select "calibration" and how long did it take for the 36 point calibration?
Did you measure the calibration cube to see if it’s accurate dimensionally?
What’s great and thorough video!
Probably gonna buy one.
Great video! Neptune 3 pro is now in Cura 🙌🏾
Vlad, great video
Very helpful video, printer all up and running great !
Followed you step by step. Mine didn’t come with the spatula or the clippers and the cable clamp was a different design. But everything else was spot on. Printing Buddha as I am typing (75% done) looks fantastic. Thanks !
This is such a step up from my previous (M3D) printer.
What did you wind up doing with the different cable clamp? I have a different one as well.
Really great video! Thank you for sharing this
Thank you so much for the video.
I wonder waht you PLA retraction settings are.
Keep it up
Thank you very much for that nice video, everything works now
Can't wait for this to be available in Canada, still out of stock in their website...
Yup, like others just ordered this printer as it will be my first. $229 is the price point for me to jump in.
I'm ordering this today because my acquila literally blew up a few weeks ago. God this is easy assembly 😅
This looks amazing, recommend this or the ender 3 neo as a very first printer?
This video helped me fix mine !! Thank you
Hi, question for someone looking to get into the FDM hobby from resin.
I want to print dnd terrain. Even have plans for a large scale airship battle.
Would you recommend this (I have a mars 3 pro) or the ender 3? Maybe another?
subscribed! such great post, very in depth. thanks!
Thank you, I followed your video to set up my NP3 and as my first project I printed the tool holder. It came out great, however a fan at the base of the printer is constantly running even when it is not printing anything. Is that normal? do I need to change a setting?
Great tutorial! I ordered one this afternoon and then watched your video! Sorry about that! Question...what is the usb printer cable for?
Thanks for the help man
Great insight and video !!! I am planning to buy my 1st 3d printer for helping with custom parts for a robotics team doing First Tech Challenge. I am kind of sandwiched between - ELEGOO Neptune 3 Pro vs Creality Ender-3 S1 Pro vs Bambu P1P. From a pricing perspective currently Neptune 3 Pro seems to be the best. Also from use case perspective for our robotics needs, we need parts that are rugged, sturdy and can withstand collision from walls and other robots. Our thoughts are to print mostly using PLA, PETG, ABS, TPU (few cases). Don't think any of the 3 printers i mentioned can do Carbon based filaments. Is that right ? Need your guidance/suggestion on which of the 3 to pick and which of these requires least tinkering or accessories and can work pretty much out of the box for the kids to help with their STEM Robotics activities. Please suggest and help.
where did you find the octopus print? also the setting you suggested in the advance and expert, is that a setting you used for all your prints?
Mine seems to print just fine, but i am trying to figure out how to achieve the wrinkled look on the bottom. Slower speeds and perhaps higher temp might do the trick. Bed sligthly bent and i will probably upgrade to silicone spacers so i can manually level it.
Thanks for the video.
I bought my daughter Ziro Starry Sky filament, but we're having an issue with it building up on the nozzle as it tries to print.
I purchased a 0.6 nozzle to try to remedy this. Any suggestions on what we should do differently in the settings to accommodate the wider nozzle would be greatly appreciated. Thank you!
Great video. Definately gives me confidence in the printer. Would get but they're all sold out in the US :(
So I've gotten this printer a week ago, the test Buddha ran beautifully, but got some lifting on other print. Anyway just wondering what the little blue tube is for, does anyone know?
Looks like it needs a bit of tunning as my Neptune 3 (not pro) for the seam and maybe some tunning for the ringing problem (last prints looks better). Neptune 3 was my first FDM from Elegoo, it’s my 8th printer I’m 3d printing since 2013.
Looks like this E motor is too heavy and far from the X gantry, this can produce some issues… which motor is? Nema 17 or 14? So strange this fan on the bottom of the hotend. It have allmetal or bore 4.1 (tube all the way in) heatbreak?
Thanks for the video, the best of of this machine. I hope to see a long term review as well and speed test to know the limit to avoid ringing issues :)
awesome thanks - what speed can you print TPU?
Really great review ... Thanks so much.
I have a question.
Can you measure or tell what the minimal footprint is of the machine?
I would like to place it on a shelf with possibility to overhang in front.
What depth is needed from the very back to the last point touching the table?
You'll need at least 18" in depth, 20" wide & 30" tall.
Any recommendations for printers that can print fast? 120-200mm a second instsad of 60? I noticed some printers can but they are not equipped with good fans etc.
We were going to get the Bambulabs H1Carbon but my father in law passed away. He has 3 3d printers. His newest is this one, which we were told we could have. Actually, we were told we could have all three of them. But we don't know what the other two are. So, we are likely going to have a 3d printer soon. Which will be just fine. My mother in law is going to need someone to print her stuff for her pottery.
There is a new CURA Version five . 3 which has neptune pro profiles installed!
AMAZING VID I JUST GOT THIS AND IT WORKS AWESOME THANKS :)
Just wondering. Where do you find these models?
Great presentation, couldn't ask for more, help me to make decision.
Is the z-axis motor supposed to be very hard to move? I can rotate the circles, but I have to use a lot of force to move it up/down
The belt tension for the bed is as tight as i can make it and the belt is still way to loose, what do you recommend?
I really want to buy the 3 pro. I've read that its not entirely suitable for ABS. Something about the standoffs and the PTFE tube in the extruder not being suitable for it. Has this been your experience?
Thank you for the video it has helped make my decision to purchase easier. I have one question what is the name of the "ABS filament" you used to print the blue wheels? Thank you
geni.us/x00w7
Of course I would see this before I commit to my first printer. I found a great price for the Sidewinder x2 from a seller in the US, but with Amazon discounts and whatnot that I have I could get this for half the price of the Sidewinder. Granted the Sidewinder is much larger and I think more flixible for my needs, this guy could also be great and easy to use. It's so new it's not even on Elegoo's site!
As someone who has both, go with the sidewinder. Both my Neptune and my buddy's had a lot of issues, some of which we still haven't fully addressed with his. My Sidewinder X2 on the other hand was my first printer and has been an absolute workhorse. It has easily handed any project or filament I have thrown at it, including TPU and Ninjaflex.
@@Ravnican127 This is good to know. I'm struggling with the decision because I can get the Neptune for about $160 while the X2 would be $300-350
@@dwarrenmsp where did you find Neptune 3 pro for $160?
@@ihasacavity I have $50 in rewards accumulated and another $10 for looking my Venmo. It all adds up.
@@Ravnican127 What issues and with the Neptune 3 pro model?
was looking to get my kid a 3d printer for christmas last year, ended up not happening. this year i'm definitely getting one and your video has thoroughly shown me that this is the printer to get! thanks!
how is he liking it so far?
@@odub5720 he loves it and is always asking to print things. I've been enjoying it too lol (I swear it was a gift for him haha)
We''ve had some hiccups with printing at times but nothing major and I think it's been more of the quirks of 3d printing than the printer itself. overall I've been very satisfied with the printer.
thank you!@@absolutetuber
Can you recommend which 3d printer should I get
between the ender 3 S1 or the elegoo Neptune 3 pro ?
How would you compare this 3d printer to the creality ender 3 s1?
At 27:15 the levelling doesn't look central, like it's offset to the right side of the bed so it's missing some of the left side
Nice video helps alot i dodnt know what to invest in for my custom made toys company
How deep is the Elegoo without y-rail.. just from foot to foot???
great vid. my print isnt coming out right. its being all jumbled up. any suggestions?
My "home" is about 3mm above the bed. After auto levelling, my home is still too high and I have to decrease the Z offset every time. Do you know to adjust the home location?
This is going to be my second 3d printer. I currently have the Ender 3 Pro and I'm tired of fiddling with it or running out of filament and not being able to resume my prints. I know there are ads ons for it but I don't want to put anymore money into it.
I followed your instructions and everything went smoothly. But I am having an issue printing the Buddha, the first layer of filament won’t stick to the bed. I have tried different things but no improvements so far :(
I can't decide whether to buy this machine or the Ender 3 V3 SE. This has a light bar, a little more build volume, and a detachable magnetic touchscreen, but the V3 SE is a little faster. Do you guys in the comment section have any advise on which one to buy?
My X axis doing small jumps while moving no metter what i do with rollers or belt. What can be problem?
thanks for the review! one on my bet this 3d print the elegoo. :)
How do you check the voltage ?? I can't find the switch !