How To Build AN Lines (And Save Money!!) (Rebirth Ep17)
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- www.thecarpassi...
MUSIC
Chuki - Rebirth
• Old School Rap Beat | ...
Desmeon - Back From The Dead [NCS Release]
• Desmeon - Back From Th...
Desmeon Social Media -
• / iamdesmeon
• / desmeon
• / iamdesmeon
• / iamdesmeon
![[LIVE] : ONE ลุมพินี 83 วันนี้!! คู่เอก "พันฤทธิ์ vs ซุปเปอร์บอล วันของโอม MBK"](http://i.ytimg.com/vi/1b4pkKHa_Fk/mqdefault.jpg)
You gonna race gingium once he goes to the 1.8 and 500 whp
I'd love to do a face off to compare the builds!
OH SNAP!!!! This idea better get SO MUCH hype! seeing the two of you hang out and do a friendly collaboration would be gnarly. meet up, and give a "Review" of each others cars and do a few "performance tests" This NEEDS to happen.
Street N Jeep gingium doesn't have anything on Greg Peters
slammedlyfe he might be able to keep up if he gets to where he says hes going to but greg ultimately wins because he will end up giving caleb some advice about building the yata that he has
P.S. greg just pinned my comment!
I've been following you for awhile and have really enjoyed your videos. You're enthusiasm and passion is contagious and makes me proud to be part of the miata community. Your videos are currently helping me with an engine replacement on an 05 miata. I can't wait to the see the final results of your build. How is it that you don't already have 1 million+ subscribers already?! I live in Socal as well and the jokes you make about the cars or the sounds of your neighborhood crack me up. Keep up the good work. If you set up a patreon account, I would gladly contribute, as I think a lot of your other subsribers would as well. I hope to meet you at some point (once I resurrect my miata as well).
+progolfer69 in doing a San Diego meet sooooooon!! And thanks for watching man I appreciate the compliments
Best miata video by FAR! !I'm in London UK ..owed my M since 1990..always watch this channel.
I salute u sir
I've built tons of AN lines and you pretty much hit the nail on the head. And now anyone on the internet can see how easy it is and stop paying out the ass to have shops make them a "line kit"... Mind if I ask which brands of line and fittings you were using?
Quality production
Another tip: don't cut on the edge of the tape, but right in the middle. You can then immediately use the excess side of the line again for the next line without the need for a cleanup.
Also, the end doesn't flay out as much, making it easier to insert in the barb.
Right, First use the electrician tape, then mark, then cut.
What we used to do was to leave the tape on the line and then put the end piece on so you do not have to fight the "frayed " end when install the rear fitting , it just makes it easier to thread on.
grapeknutz Solid 👍 will definitely try it next time
Use the fiber reinforced packing tape. Cut in the middle of the tape and leave it on while threading on the hose. This has worked well for me.
i thank you Greg. I have been looking for a solid video on this subject an found some joke vids bout it. Again you have been helping me with my build an im pretty sure others as well why not post some fans build that u have been unkowingly helped. Idk if spelled right
I legit needed this video like last week when my AN lines kept leaking because I wasn't assembling them correctly on my turbo miata setup haha
If you go with the ptfe lined stuff that has the plastic coating around the outside of the braiding it’s much more of a pain in the ass to make the lines and to get the connector on the hose since the connector has to go much further along the hose. In that case you make the job much easier by sliding the connector on before you cut the hose.
thanks, great work sir. :D
Looks good! Great tip with the electrical tape.
You really need to rinse out the hose with water or something once its all assembled. The rubber, nylon, and abrasive cut off wheel particles coat the inside of the hose after you cut it, and you REALLY don't want that in your engine.
Interesting...thanks for sharing!
That engine keeps looking sexier and sexier!
Great video Greg! Do you generally prefer a specific brand for AN fittings? Also what are your thoughts on push lock setups?
supercarmio I haven't used enough different brands to have a preference... These are pretty much all eBay purchases that are less expensive than mainstream sites like Summit etc so we'll see how they hold up! The whole line setup for my motor was only about $100.
got it, looking forward to seeing how the build turns out!
A mazda miata 1992 thats my dream car once i get it im going to get a miata and do build videos you have inspired me. I love your vids i look up to you and hopefully some day i will collab with you keep up the good work😁👊👍
get a chevy astro
Nice review! Thank you! It gets me excited about getting back into playing with cars!
Hey Greg ! great info all around, do you think there is a reason to buy a special tool for installing AN barb ? (koul tool...) thanks !
If you are using the stainkess steel hoses make sure wrap the tape tight and dont take it off or the steel will want to go back straight and you will never get the fitting on.
Nice short and sweet. Diggin it. I need a car passion channel shirt btw
I love these little surprises!
You should get the PTFE lines. With standard AN braided hose you will get fuel smells through the rubber hose. I ordered all mine through anfittingsdirect and they even come coated with a outer layer which is very nice and good quality.
+Shwalker07 I'm actually going all stock for the fuel lines 👍
Nice.
invest in some aluminum AN wrenches. they prevent marring of the AN fittings. good video
+1 You really need to point out that regular wrenches will tear up the aluminium fittings - at least overlay a warning message during that section of the video.
Video is bang on! But can you show us how you do the oil feed and return?
MultiAna96 If you can wait until Monday :)
TheCarPassionChannel yes do it Greg
Perhaps a dumb question, but I've never seen it explained before. What are the benefits of AN lines and fittings?
Earned another sub. Great video!!
Dude, your content, production is so dope... How can we help you get your subs up?
Jo Ro Just keep on watching the vids brother :) if you see one you like maybe give it a share 👍👍
Awesome vid. So many people gloss over this.
Did you make a note of what fittings you used on this engine as I’m about to begin a vvt turbo build and would like to do this
This is a good title for the video. You should get lotsa views off this one!
Use AN wrenches doing that, way less of a chance of rounding off the flat spots since the metals are the same.
Engine is looking soooo clean and tidy. Bet you stare at it for hours on end 👍🏻😂
Hey greg, you said on your website the three places to buy an lines. Where did you specifically buy them.
pistonsoup I got all of the parts seen in this video from eBay 👍
Awesome video very helpful!
This will definitely help when I relocate my oil filter.
What does AN stand for
Street Drive 420 Army Navy
Is it possible to push 500hp from miata 1.8 engine? Because i saw gingiums video, where he claims that fully built 1.8 (stroked to 1.9) can push high 400s or low 500s
It's possible with enough boost and enough fuel. Just depends on how long you want it to last lol. At that level, miata transmissions are on their last legs and even the diffs have been known to fail around that limit.
Yes it's possible and it's already been done. It requires a fairly large turbo which will have tons of lag and the car will really only be good for highway pulls and drag racing. It also requires substantial drivetrain upgrades like a differential and transmission from other cars like Mustangs/BMW's/Chevy's etc, along with the custom fabrication to make those parts fit.
TheCarPassionChannel oh okay i see, thanks for reply. But one thing is, his Miata isnt built for drag racing, he built it for circuit/autocross events, so good luck for him trying to control that car. Thanks for reply one more time!
What am i doing here, I dont even own a mx5.
Ow wait, I love the channel content
👌👍
Actually don't bottom out the hose in the fitting shell, just leave a little bit of room
Very nice dude!!
Just what i was looking for 👍
Thanks for making this video!
I'm waiting to see if he makes it to MRLS.
👍keep up the good work
how do tuners in CA deal with emissions?
Does it matter whether the turbo is clocked up or down? I'm new to turbos
Dynamic Tuning The center housing must have the oil feed on top and the oil drain on the bottom. The compressor and turbine housings can face any direction 👍
Greg, your hair....
man...i tried doing an lines on my 75 280z for my fuel lines. that shit was leaky. given, i didn't know what i was doing at the time, 10 yrs ago lol
Dang man. Now I want to redo my engine bay using all AN lines.
Atta boy
Fastest like ever
Any one know where I can get the type of material hose.
I want a miata so bad.. why they gotta be so expensive in my country ;-;
Carlos José really? Here they cost as much as a toyota corolla etc. What country do you live in
Melody I live in Brazil, here they cost like 40k... and Toyota Corollas here are expensive as well.. even the old ones
Carlos José wow... that is realy expensive!
lol. "you can't really complain" and then coming up with the worst example in the world. That's like: "I'm hungry! Can I have one more sausage?" No and you can't complain. In Africa they only get sausages every six months and they have to stand in line for them for six days and don't you dare make you own ones. That's illegal!
Miatas got quite expensive where I come from, too. Two years ago when I bought mine, I got lucky and hit the lowest point. Got it for €1650 (about $2000), now cars with about the same specs are about 3 times as expensive. Funny enough, the stock classic untinkered ones are cheaper and you could get them for around €3000.
***** thats such fucking bullshit oh my god i feel really sorry for anyone who lives there
Dat length of the video😏
Aren't AN fittings expensive?
MrNightpwner Not compared to buying pre-fabbed line kits
Mate what's up with the videos assembling the engine?!
+Pedro Ferreira What do you mean? I've been uploading them for months!!
you should cut through the middle of the electrical tape
When I order my an hose from eBay they used duck tape instead of electrical tape idk why but it looks like it works better then electrical tape. But an lines are a bitch
Video starts at 0:00
I willing to bet ricermiata will have blown the motor in the roadster by the time this ones running.
nah Jack tuned that car, and Rodnock seems to be taking care of it.
TheLeafySpring except for everytime he changes his oil there is only one quart left to drain
2019
Your hairstyle is still living in the year 2001😂😂😂
Yea I'm having a fucking perfect day... I accidentally got brake clean on my fucking Rep ASA wheels and the paint peeled off. But I did wash and wax my car and install some parts so give and take.
It's fourth video in the row with lenght of 4:20
I own a miata, marry me dude
Happy 4:20
The video is 4:20 long :0
4:20 mins long ;)
You dont need to use electrical tape... It sucks at everything... Use scotch tape or duct tape.
1:07 how the fuck did you tear that electrical tape! Are you a wizard?