MBRP Exhaust Installed | 7.3L Godzilla Powered Tremor Roars
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- We stopped by 5 Star Tuning just in time to catch them bolting on an MBRP Cat-Back Exhaust to a 7.3L Godzilla V8 powered 2020 F-250 Tremor. It sounds strong.
Continue the discussion at SVTPerformance.com :: www.svtperform...
Took my 7.3 gas to these guys over the weekend for the MBRP install. They never missed a beat, install was great, service was right on, and truck sounds good. Thanks guys.
I’d like to know how loud it is under acceleration, idle, and highway cruising in the cab.
Factory high flow chambered muffler and straight through resonator! Seems like Ford did a good job engineering the exhaust so I’ll keep my money in my wallet. Thanks for the video.
2:50 - they need to go back and address that at MBRP. That looks horrible. You can't tell me they couldn't fix that piping. For the other comments, the stock resonator is the bottleneck. Check yours and see that color line that you have about a few inches from the dual inlets on it. The stock muffler is already a turbo style chambered muffler without batting. The pipe from the resonator also decreases in size to increase flow.
Much quieter than the mbrp kit on my 5.0 - it’s all because the pre rear wheel kit for coyote deletes the resonator entirely - and bolts on directly at the flange right after the cats. Sounds great on the 7.3 without all the additional drone at highway speeds losing the resonator causes on my 5.0 .
I'm sure it would sound MENTAL with American Racing Headers 😁😁😁
that does not sound good imo
more for flow and some power.
Anyone know where I can order those fender flares at? Thx
I really like mbrp,but this setup sounds pretty bad,not as bad as their setup for f150 EcoBoost though.
All on all,this is the worst sounding aftermarket setup for the 7.3 equipped superduty
So an exhaust system on these is for sound only? Good to know. I’ll keep the stock system that is well built and enjoy my solitude and quietness!
Catbacks on most modern vehicles produce little HP gain. It's all about that sound.
@@SVTPerformance are there any aftermarket exhaust systems that increase your fuel efficiency for the 7.3 Ford engine? Thanks for the great video...
FatherTime don’t expect any mpg improvements from a cat back system. Headers maybe but not much
2:27 to hear the exhaust.
Good video but sounds like just about every exhaust out there that's been put on a ricer with all the crackle.
That’s not a muffler, that’s an auxiliary skid plate
I just wish someone would make a dual exhaust set up just like that one. Visually I have a hard time seeing one single exhaust vs two Big Black pipes on each side.
I'm a fan of single side exit dual exhaust. We'll probably get a few of those on down the road.
That's what she said
Im going to get another 7.3, Did MBRP come out with a split dual black set up.
Keep it factory and save your money.
I don't know but would think that loud exhausts would get tiring when towing at higher rpms over longer distances! Perhaps someone with experience here could chime in to comment?
They get old real fast on long trips. I’ve added pre and after resonators on my v10 f250 with banks headers. I also ditched the banks muffler for a aero turbine resonated muffler
Yes, the droning gets pretty annoying
Well if the godzilla goes into a mustang...
You've got some sense, that's why you get it valved or don't do it at all
Agreed. Drone gets very old quickly while towing several hours. Additionally, I think the 7.3 has two mufflers and it looks like the first in line muffler was left on. I’m curious why?
How does this effect the warranty of the engine?
Cat back exhausts don’t effect the warranty
Not bad. Nothing like a 5” straight pipe on a deleted diesel tho 😎
Facts
Rev-Hang for days.
i can’t find a link to order, or find it on their website?
I wondering can you get a true duel exhaust off the manifold or header ?
Yes
Is anyone making a nice loud cat-back bolt on system for the 7.3 yet, maybe something in the flowmaster super 10 range? Love the obnoxious crackly sound. Haven't been able to find anything yet and this engine is begging to be heard
Go check out Stainless works on TH-cam. They made a system for the 7.3 and it's killer. Way better than this system or Flowmaster.
th-cam.com/video/gS8gBOAsicc/w-d-xo.html
Thanks Randy. Sounds awesome. Definitely looking into this one
No problem Ken. In my opinion it's the best sounding exhaust I've heard on these newer trucks.
I've noticed that a couple of engine builders have installed headers on the crate version of this motor when they have it on a dyno. Is anyone offering headers for this engine yet?
Yes
A more helpful answer: American Racing.
americanracingheaders.com/collections/ford-f250
Is there any improvement in performance? Horsepower?
Nice truck...and the install looked very nice..but honestly guys it sounds like a mutt....I mean it’s no powerhouse from the factory...I do subscribe to your channel and not at all a hater......it would have been nice to include the before and after dyno results....I would not expect as you say much...but still as a service to your fans some knowledge of price per horsepower would be interesting...
A cat-back is worth very little power. No point in dynoing it.
Have you seen dyno sheets? The power curve is a damn near 45° upward angle and the torque is flat as a surface plate. The factory cam is a very high lift, but short duration and it makes damn good power. I'll "white knight" for Ford on this one, the 7.3 Gasser is a bad MF.
Will this fit on a 2022?
needs gatorback mudflaps
I have the SS version of this and is of reasonably good build quality. Sounds good though. What did you do to keep it off the spare tire heat shield?
Still quite
Juicy
Where did you buy the fender flares from?
They’re factory on the tremor
Needs bigger tyres
37’s to 39’s 👍
Is that front stock can a muffler or resonator? Just curious why it was left in place is all.
Resonator to minimize drone at fwy speeds.
Yeah that’s not too bad could be a lot better
On gasoline nothing beats sound of flow master super 10s
Literally anything sounds better
For the money spent, that sounds horrible for it to be a big v-8.
You Didn’t weld it???
Why would you?
Idk shits and giggles I guess.
Honestly it sounds like shit. I’m waiting for a quality exhaust system from Magnaflow. This sound like total a raspy, takuache rice burner truck
Yup i agree sounds like a 4 banger....garbage
🤣🙉 OMG horrible
Sounds TERRIBLE!🤢🤮
Sounds like 💩... the engine deserves better!
Sweet sounding piece of junk.
How’s it a piece of junk lol
@@zachconant7031 he’s probably a shit box Chevy boy