Good knowledge man. I'd recommend capping that PCV tube on your intake box or removing it and plugging the hole. It's probably doing more bad than good at the moment.
basically when this happens, you need to resolder the joints on the circuit board. Hardest thing to do is opening the sensor because it's glued with silicone adhesive and there's 2 smaller sized torx screws in where the solenoids are so you would need a long slim screwdriver
Thanks for the video, I've noticed mine go on and off about twice now..I was already thinking wheel speed sensors but now I have another possible solution. And it's good to know you don't have to mess with the lines. I'm in PG too btw
Thanks for posting this, man. This is good to know. I've been having a bitch of a time with my car after installing all new calipers, pads, rotors, and a torsen diff. I'm not much of a mechanic so finding the cause of my problem(s) has been an expensive nightmare. I just bench bled and installed a new master cylinder last night and am about to bleed the brakes for the 100th time. Lights only come on briefly when abs activates, which it does way too easily. Also, my car tries to pitch sideways under semi-heavy braking).
my shit just started doing this as i put my doughnut due to a flat and now my lights came on and has the heavy turning to the left under easy to light breaking
This sounds like an easy enough fix, getting that rear ABS sensor today now that's another story, eBay has a pair for $399 while Hawkmotorsport sells them for $150. It used to be a $50 part until 2016 when GM stopped producing it. I just nabbed one from an honest but elusive eBay seller for $45+shipping and tax👌 No more skidding while braking on wet road👍
Great video i was not aware of this problem and for me the lights were coming on and off for a while then today they would not go off . After watching the video and observing there were solenoids inside and they sometimes stick . I took a rubber mallet and gave it a couple moderate taps and it worked So i guess what im saying is try giving it a couple of taps before ripping apart ~~~~ just saying !!
Sometimes those lights come on in the speed sensor when theres a small tire on the the vehicle or if car isnt leveled right, i went n bought all matching wheels n those light went off
I had a shop tell me its my LR wheel speed sensor. Which are impossible to find. How can i tell which part is which on the module? My was hit on the front and god knows what parts were put on it
@bigty1k OK thanks I'm struggling with a no cranking no start issue and the last thing I worked on was my brakes. I have a abs inop light that comes on.
@@kennethwade23 I did have a issue like that one time now that I think about it. The little black chip on my key was dirty. Also if you haven’t already check out ls1tech.com alot of useful info on there.
Have this exact same problem my speed sensors seem to be ok this might be my problem. I would eventually like to delete the abs but thanks for the video
You need a 4 channel if you have traction control and a 3 channel if you don’t. If you have a ASR button next to the foglight button then you have traction control.
BigTy 1k thank you so much fam. I just called to GM to compare prices they are asking 700 bucks for that part but eBay sells it for 150 - 200 bucks. It’s crazy
I have heard of it doing that after lowering or if one of your tires are taller than the other look up some stuff on ls1tech you may be able to find a solution I don’t think the ebcm will work for you.
6 screws brother thats all. No need to show me doing that I showed what u need to do to fix it, what tools to use and where I got the part and what I paid.. lol need me to hold your hand?
Good knowledge man.
I'd recommend capping that PCV tube on your intake box or removing it and plugging the hole. It's probably doing more bad than good at the moment.
Had camaro 10 years inop lite just came on thanks will change
basically when this happens, you need to resolder the joints on the circuit board. Hardest thing to do is opening the sensor because it's glued with silicone adhesive and there's 2 smaller sized torx screws in where the solenoids are so you would need a long slim screwdriver
Thanks for the video, I've noticed mine go on and off about twice now..I was already thinking wheel speed sensors but now I have another possible solution. And it's good to know you don't have to mess with the lines. I'm in PG too btw
So I have to buy another 3 channel abs from another Camaro or Firebird and take off my abs module?
Yes if you dont have traction control I would try a 3 channel. Check ebay I found mine there for about $80
What’s the solution Do have to buy another 3 channel without tcs?
Mine doesn’t have Traction Control
Yes look up this number on ebay. 125747539553
Good video helped me out appreciate you 🔥
Thanks for posting this, man. This is good to know. I've been having a bitch of a time with my car after installing all new calipers, pads, rotors, and a torsen diff. I'm not much of a mechanic so finding the cause of my problem(s) has been an expensive nightmare. I just bench bled and installed a new master cylinder last night and am about to bleed the brakes for the 100th time. Lights only come on briefly when abs activates, which it does way too easily. Also, my car tries to pitch sideways under semi-heavy braking).
my shit just started doing this as i put my doughnut due to a flat and now my lights came on and has the heavy turning to the left under easy to light breaking
Delete ABS
LMR 98-2004 Mustang ABS delete
Mustang Camaro use same ABS module
Make sure it’s the 6 port block
$70
Thanks for posting! I been having the same issue with mines since I first bought it in 2015.
What do you need to get the lights off? I have the 3 channel without TCS. Where do I buy the disable
Thank you brotha I needed this video
This sounds like an easy enough fix, getting that rear ABS sensor today now that's another story, eBay has a pair for $399 while Hawkmotorsport sells them for $150.
It used to be a $50 part until 2016 when GM stopped producing it.
I just nabbed one from an honest but elusive eBay seller for $45+shipping and tax👌
No more skidding while braking on wet road👍
Mad problem solving/researching skills!
My lights go off and on with no consistency WTH
Great video i was not aware of this problem and for me the lights were coming on and off for a while then today they would not go off . After watching the video and observing there were solenoids inside and they sometimes stick . I took a rubber mallet and gave it a couple moderate taps and it worked So i guess what im saying is try giving it a couple of taps before ripping apart ~~~~ just saying !!
Good tip!! I never thought of that
it got rid of my asr , abs, radiator, and brake light 💯💯
z28rob glad to hear bro!! 💪🏽
Danke. Mine flash off and on. Yes, annoying. 2001 SS, black w/ Ts and 6 spd.
Sometimes those lights come on in the speed sensor when theres a small tire on the the vehicle or if car isnt leveled right, i went n bought all matching wheels n those light went off
Yea I have heard of that too
A hero
BigTy1K...........after your fault lights went out did the Traction Control work again?
Yes
Right on thanks
I had a shop tell me its my LR wheel speed sensor. Which are impossible to find. How can i tell which part is which on the module?
My was hit on the front and god knows what parts were put on it
I did the same thing n I. Changed it n now it works
💪🏽💪🏽
Sweet, but I don´t know what to search for on eBay to find what to get. Any help here?
ABS control module
Having this issue but only ASR Light stays on, used to work untill I did the k member swap. Not sure what to do i got a scanner and it read code c0239
My 98 z28 flashed all three and my car wouldn't start for like 15 minutes, I was romping in the wet and I think I might have gotten that box wet, ebc.
Thank you
Will the abs inop light being on keep the car from cranking?
Not that I know of I never had that issue.
@bigty1k OK thanks I'm struggling with a no cranking no start issue and the last thing I worked on was my brakes. I have a abs inop light that comes on.
@@kennethwade23 I did have a issue like that one time now that I think about it. The little black chip on my key was dirty. Also if you haven’t already check out ls1tech.com alot of useful info on there.
Gracias como puedo buscar esa parte
I'm considering this based on the same problems..... Are you certain the lights aren't turned off only due to the battery disconnect?
CoachBriceWilliams Yea I’m certain they were on since the day I bought the car after I changed the part they never came back on.
What is the part called? I have this same problem!
Changed the bulb and it works, but my brake light still doesn't go on on the right side only, what's going on??
Bro where did u order the replacement part?🙏🏼
Ebay
Does anyone know the part # for this ?
Have this exact same problem my speed sensors seem to be ok this might be my problem. I would eventually like to delete the abs but thanks for the video
Good shit my man
What is the part number
Aye bro any chance you can help me out where can I find one? I have a 2000 z28 camaro how would I tell if I have a 3 or 4 channel?
You need a 4 channel if you have traction control and a 3 channel if you don’t. If you have a ASR button next to the foglight button then you have traction control.
Well done video...
I’m about to do this next week. Where did you buy the EBCM?
aaronwatts12 ebay
Thank you
BigTy 1k thank you so much fam. I just called to GM to compare prices they are asking 700 bucks for that part but eBay sells it for 150 - 200 bucks. It’s crazy
aaronwatts12 yessir thank god for ebay 😂
I have 2002 trans am you I getting the TCS n the brake light that go on the same time it's really annoying
Is it still on ?
@@breadfirstgaming9233 ya it come on here n there
@@Bust714. did you find a fix? bought my 01 ws6 last night and has both on
@@Thudxr21 Oo ya I ended up fixing it myself it's not hard just have to have the right tools
How much did the unit cost?
I think I paid around $80 on eBay
I have the same problem on mine but the lights turned on after I lowered the front
I have heard of it doing that after lowering or if one of your tires are taller than the other look up some stuff on ls1tech you may be able to find a solution I don’t think the ebcm will work for you.
Part#?2000 camaro z28 ss
GM vehicles of this age are known for this....the solder joints go bad in those modules and you get those lights..
You sound like you from the DC area
Yea Pg County Maryland
@@bigty1k Me too Pg. Just got a 02 Z28 and having the same issue. Thanks for the tip.
Im out of Cecil Co MD 98 z28 conv
it worked for y’all ? lmk
You are telling me what you did, & Not showing your viewers how to actually do the job, this video Sucks.😢 Big-Time!!
6 screws brother thats all. No need to show me doing that I showed what u need to do to fix it, what tools to use and where I got the part and what I paid.. lol need me to hold your hand?
I just got my Formula out, that ABS INOP light came on, also off..B/C think i did all hoses , breaks all around..