Before ultrasonic was widely available people used to dunk them in boiling water for 5 minutes at a time. If it didn't come out clean you let it cool off and did it again and again.
@@802Garage correct, the others who agreed you should not submerge injectors completely are right. this is not how to clean an injector, instead its the lazy way and how to potentially blow your motor by giving people a false sense of temporary security as they still may work, for a while.
@@LygerTheCLaw It is 100% fine to completely submerge injectors and this is fine. It is part of the cleaning process during pretty much any injector refurbishment. I guarantee you cannot provide me a source which says otherwise.
It's common for coils, motor windings, even entire circuit boards full of tiny complex components.....to be washed when doing industrial repair. The important thing is to dry them properly before power is reapplied. If the ultrasonic bath is 100% alcohol..... Then it will attach to any moisture and evaporate even from the deepest darkest crevices. If something else is used then a low temperature baking and/or second bath in ultrasonic / vacuum chamber with 100% alcohol. That will bond to any remaining moisture and remove it.
@@Zachary77 this is not true. I use my ultrasonic cleaner for hundreds of PC parts like CPUs, RAMs, Motherboards and Graphics Cards. It worked like a charm as long as you dry the part completely and looks brand new afterwards.
@@Zachary77 it's more of an issue for the plastic parts, pins and o-rings. Ultrasonic cleaners will erode those components quickly and create a replacement out of a repair
If this was 5 min, how did the injectors turn themselves 180* and all face the same way, the discoloration of the fluid that would occur as a result of the carbon being removed is less than I would expect.
Hocus Pocus.. Fool us Joke us.. yeah, i want one of these that will automatically turn and rotate things.. thought me eyes was playing da fool i did..man what will folks come up with next.. just Wow 😳..
they still look used tho however even if its true he managed to remove all that he still didnt open the valve and spray them clean. ultrasonic is commonly used to shake loose dirty but u also attatch carb cleaner and to the fuel part and open it by booping it to a 12v batterly (preferably both ways)
you have to have a timer or electric charge to pulse plunger open and close to clean what’s important inside of injector hope this helps someone you can buy box that operates 4 injectors at a time
so shops that actually rebuild injectors pull the conical screens at the top of the injector and install new ones. they run the injectors on a flow bench with special cleaners. Ultrasonic cleaning the outside the injectors are nice but by no means fixes the clogs inside.
It doesn't only clean the outside tho.. The way ultrasonics work will cause implosions in the liquid wherever the liquid touches. If the liquid can touch the inside of the injectors without actuating them, which it can, then it will clean at least some of the internals as well. By no means is it as good as doing it the proper way. But saying ultrasonics only clean only the outside is pure misinformation. If this was the case they wouldn't be used to clean complex parts.
Injector cleaning machines are a combination of an ultrasonic bath and a rail that you hook up each injector and runs cleaner through firing each injector so that is the best way to clean them then into the bath Alternatively just buy new ones 😮
@@imathreat209 Nice. I have a 2013 Acura RDX and I believe it's got over 220,000 miles needs injectors. I was going to think about doing it this way. they're like 70 a piece, six of them.
Interesting concept but looking through the comments most people disagree with you to a certain extent. So I would encourage others to try and see how it works for them. He's always hook it up to a valve stem. But that's another video.
My grandfather has an ultrasonic bath. He put a small electric motor in his and it cleaned all the grease and debris out of it. After that it was as good as new. I don’t think the bath will necessarily hurt the coils, but since an injector has to be sealed, that is a genuine concern.
It's common for coils, motor windings, even entire circuit boards full of tiny complex components.....to be washed when doing industrial repair. The important thing is to dry them properly before power is reapplied. If the ultrasonic bath is 100% alcohol..... Then it will attach to any moisture and evaporate even from the deepest darkest crevices. If something else is used then a low temperature baking and/or second bath in ultrasonic / vacuum chamber with 100% alcohol. That will bond to any remaining moisture and remove it.
Making a real injector cleaner isn't that hard. Just bench replicate a basic fuel system. Pump, short line, a fuel rail and some plastic, vertical containers that can hold gas. The injectors can be controlled by a simply controller made with an Arduino. There are projects like this on the internet. Run the pump laying in a tub of cleaner. Watch the injectors spray into the containers. You will clearly see injectors that are dirty by the uneven spray pattern. When the injectors are clean you will see a nice even pattern on all of them and all of the tubes the injectors are spraying into should have have he same amount of cleaner in them, indicating all of the injectors are flowing evenly. Don't put a constant 12 volts into the injector. You do risk damaging it. Injectors are also sealed. There shouldn't be an issue cleaning them like this. If you have one go bad during cleaning it was probably going to fail soon anyway.
I've always used Techtron fuel injector cleaner over the years as a regular maintenance item. I still have my original 03 fuel injectors on my Chevy truck. No ultrasonic cleaning at all. People tend to think, they have fuel injectors issues. So they buy a new set and still the same issues. About 8 weeks ago. I was asked about a van having misfire issues and down on hp. I asked the Lady. But 5 Techtron. Add to the gas tank for every fill up. She called my about a month later and said, no more misfire issues, power restored and idles wonderful.
That's exactly an approach that was used for all 6 injectors for my Subaru, and after that, they started leaking slowling. Do not do that like in a video! Not all ijectors will survive.
Menurut saya, Injectors itu memerlukan masa yang lama sehingga mencapai tahap seburuk itu. Tiada bahan dapat membuatnya baru dalam masa 5 minit .Proses ini mungkin lebih dari 5 minit.🤔
@@3500camarz it got jammed up i had to reclean them myself with injector cleaner used in fuel tanks and i left them there for some time and i shake them also then it was a matter of hitting them while pulsing 12v
@@tomsurrey2252 injectors fail in two ways either jamming up or burning the coil inside. Mine was jammed because when the cleaning happens it can move large amount of dirt to the opening whole which can cause the solenoid to be stuck open/close
Golly those are going to flow fuel so much better with a clean outer shell,it will just atomize the fuel perfectly now having not been cleaned out on the inside with pressurized cleaner. I think when my air filter is clogged i will armor all my engine bay insted of changing it. Lmao 🤣
I've read that if the tank is metal then place something like plastic, between the injector and metal bottom or, if it's a plastic tank then it should be ok!
Great video for those of us that want to learn simple DYS! I see negative comments from people. The haters will always hate. But great videos I became your subscriber.
watch how to screw up injectors by submerging them fully so that the solvent gets inside the electrical side of them. great work making a video how not to do this!
When the video switches screens like that, it's very easy for someone to say it was however many minutes or hrs or days that they wanted to say...lol. Also it's a possibility that the injectors were swapped out for new 1's...😂
Если моете форсунки ультразвуком, не забывайте потом проверять их на герметичность. Если форсунка потеряла герметичность и вы поставили её на мотор, есть возможность потом попасть на капиталку мотора в результате гидроудара.
Just replace them they are not that expensive and most cars replacing injectors is easy job, just like most things they have a lifespan point where they have to be replaced so don't be a bad owner and replace.
So I got a fuel injector cleaning test kit and some new filters cause I already dropped money on the tools, fuel filter, spark plugs, and two upstream o2 sensors so definitely going to clean them instead of dropping another $400+
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
hope the liquid doesn't damages the coil of the injector
It doesn't. This is extremely common practice and the comments need to calm down.
@802Garage what is the stuff he put in the cleaner ?
Before ultrasonic was widely available people used to dunk them in boiling water for 5 minutes at a time. If it didn't come out clean you let it cool off and did it again and again.
@@802Garage correct, the others who agreed you should not submerge injectors completely are right. this is not how to clean an injector, instead its the lazy way and how to potentially blow your motor by giving people a false sense of temporary security as they still may work, for a while.
@@LygerTheCLaw It is 100% fine to completely submerge injectors and this is fine. It is part of the cleaning process during pretty much any injector refurbishment. I guarantee you cannot provide me a source which says otherwise.
It's common for coils, motor windings, even entire circuit boards full of tiny complex components.....to be washed when doing industrial repair. The important thing is to dry them properly before power is reapplied.
If the ultrasonic bath is 100% alcohol..... Then it will attach to any moisture and evaporate even from the deepest darkest crevices. If something else is used then a low temperature baking and/or second bath in ultrasonic / vacuum chamber with 100% alcohol. That will bond to any remaining moisture and remove it.
Doesn't have to be alcohol: YOU choose what you use! 😉
@@steven4894 Maybe pay attention to why he said alcohol to dry it with. Its because ethylic alcohol strongly absorbs water.
does start fix injection
What type / sort of alcohol?
It's nice but I would of hung them so just the injectors were submerged...👍
Have a great day everyone 👍
Yep, electronics don't fair well when submerged
@@Zachary77 this is not true. I use my ultrasonic cleaner for hundreds of PC parts like CPUs, RAMs, Motherboards and Graphics Cards. It worked like a charm as long as you dry the part completely and looks brand new afterwards.
@@Zachary77 it's more of an issue for the plastic parts, pins and o-rings. Ultrasonic cleaners will erode those components quickly and create a replacement out of a repair
If this was 5 min, how did the injectors turn themselves 180* and all face the same way, the discoloration of the fluid that would occur as a result of the carbon being removed is less than I would expect.
....... the person probably turned them......
Or he replaced em with new ones
Hocus Pocus.. Fool us Joke us.. yeah, i want one of these that will automatically turn and rotate things.. thought me eyes was playing da fool i did..man what will folks come up with next.. just Wow 😳..
this thing absolutely sucked. the vibrations were way too slow for this.
they still look used tho however even if its true he managed to remove all that he still didnt open the valve and spray them clean.
ultrasonic is commonly used to shake loose dirty but u also attatch carb cleaner and to the fuel part and open it by booping it to a 12v batterly (preferably both ways)
TIL "refurbished" fuel injectors are just dropped into an ultrasonic cleaner🤣
Crispy fried injection 😋😂
😅
Just did it with 15 year dormant injectors. It works.They were clogged solid. Simple Green, one hour.
you have to have a timer or electric charge to pulse plunger open and close to clean what’s important inside of injector hope this helps someone you can buy box that operates 4 injectors at a time
so shops that actually rebuild injectors pull the conical screens at the top of the injector and install new ones. they run the injectors on a flow bench with special cleaners. Ultrasonic cleaning the outside the injectors are nice but by no means fixes the clogs inside.
No one will listen to you. The problem with your comment is that it’s the proper way to clean it.
It doesn't only clean the outside tho.. The way ultrasonics work will cause implosions in the liquid wherever the liquid touches. If the liquid can touch the inside of the injectors without actuating them, which it can, then it will clean at least some of the internals as well. By no means is it as good as doing it the proper way. But saying ultrasonics only clean only the outside is pure misinformation. If this was the case they wouldn't be used to clean complex parts.
Yea how dare you explain the proper way to clean injectors. Though i was thinking the same thing before i read your pathetic comment. Jerk. 😁
Injector cleaning machines are a combination of an ultrasonic bath and a rail that you hook up each injector and runs cleaner through firing each injector so that is the best way to clean them then into the bath
Alternatively just buy new ones 😮
what machine is that?
I'll try it one day soon but I'll definitely be plugging the intake to stop particles from re-entering.....
اسال ما هذه الماده التي تنظف بها قطع السياره وهل تعرضها للغلي ام للكهرباء لكي تكون جاهزه للعمل
Beautiful!! Thanks for sharing
You are so welcome!
Hi bro will it clean also the internal of injector @@AliMECH
If 5 minutes did that I would leave them for an hour, awesome video.
would be nice to see the close up end result!
What’s that tool called that you putting liquid?
What is that mechanism ?
What liquid should be used?
What is the liquid that the injectors are in called???
Hydrogen dioxide
Does it clean the inside ?
More importantly, did they work afterwards?
Done it before and yes. I used seafoam.
@@imathreat209 what kind of engine where you're injectors out of? thanks!
@@1979utuberI'd like to add my injectors were also not in this bad of shape. They actually was in relatively good condition
@@imathreat209 Nice. I have a 2013 Acura RDX and I believe it's got over 220,000 miles needs injectors. I was going to think about doing it this way. they're like 70 a piece, six of them.
@@1979utuber😢
Just saying, to better show its effectiveness. Show a before and after by using a pulsed flow test.
Interesting concept but looking through the comments most people disagree with you to a certain extent. So I would encourage others to try and see how it works for them. He's always hook it up to a valve stem. But that's another video.
Muy buenos tus vídeos te felicito 👌 disculpa que líquido limpia inyectores me puedes recomendar y cuánto vale esa tina de ultrasonido
Hola gracias. Heed es un buen limpiador de los que he usado hasta ahora
What if the coil is not 100% sealed and ultrasonic bath damages the coil ?
My grandfather has an ultrasonic bath. He put a small electric motor in his and it cleaned all the grease and debris out of it. After that it was as good as new. I don’t think the bath will necessarily hurt the coils, but since an injector has to be sealed, that is a genuine concern.
It's common for coils, motor windings, even entire circuit boards full of tiny complex components.....to be washed when doing industrial repair. The important thing is to dry them properly before power is reapplied.
If the ultrasonic bath is 100% alcohol..... Then it will attach to any moisture and evaporate even from the deepest darkest crevices. If something else is used then a low temperature baking and/or second bath in ultrasonic / vacuum chamber with 100% alcohol. That will bond to any remaining moisture and remove it.
Then you’d have a damaged coil
How to use Liquid brother
Brilliant idea
Pokaż jak wyłanczasz maszynę i wyjmujesz wtryski , ogólnie ciekawy film
Simple way as fuel injection cleaning solution?
I wonder if it works on O2 sensors ?
What type of cleaning fluid
Thinner
Hello
when you clean the car with diesel injector cleaner. by mistake, I throw clean octane bezina, there is a problem ?
Making a real injector cleaner isn't that hard. Just bench replicate a basic fuel system. Pump, short line, a fuel rail and some plastic, vertical containers that can hold gas. The injectors can be controlled by a simply controller made with an Arduino. There are projects like this on the internet. Run the pump laying in a tub of cleaner. Watch the injectors spray into the containers. You will clearly see injectors that are dirty by the uneven spray pattern. When the injectors are clean you will see a nice even pattern on all of them and all of the tubes the injectors are spraying into should have have he same amount of cleaner in them, indicating all of the injectors are flowing evenly. Don't put a constant 12 volts into the injector. You do risk damaging it.
Injectors are also sealed. There shouldn't be an issue cleaning them like this. If you have one go bad during cleaning it was probably going to fail soon anyway.
Need to see the injector spraying becore and after. Or is this preventative maintenance?
Por favor en español y nombre del liquido y ese vibrador,gracias
Did u leave the o rings on??
WHAT DIFFERENCE WOULD THAT MAKE
After 5 minutes they even flip
Freakin awesome I just got one I use it for my lawn equipment carbs.
😂😂
What brand of -
(1) Ultrasonic cleaner did you purchase.
(2) What brand of liquid injection cleaner did you use.
Ultrasonic Cleaner: s.click.aliexpress.com/e/_AFalG9
for cleaner, i used, seafoam, valve cleaner by liqui moly or Heet cleaner
I've always used Techtron fuel injector cleaner over the years as a regular maintenance item.
I still have my original 03 fuel injectors on my Chevy truck. No ultrasonic cleaning at all.
People tend to think, they have fuel injectors issues. So they buy a new set and still the same issues.
About 8 weeks ago.
I was asked about a van having misfire issues and down on hp.
I asked the Lady.
But 5 Techtron. Add to the gas tank for every fill up.
She called my about a month later and said, no more misfire issues, power restored and idles wonderful.
Please post full video
th-cam.com/video/AqMukdHzG9Y/w-d-xo.html
What type of liquid did you use to clean injector
WAB industrial
Liquid?
Por lo visto no hay problema si le deja los oring
what is the fluid you are using as a base?
Appears to be gasoline.
Injector cleaner lol
What did you put in there bro that part is completely silent
Bench tester ?
one thing i want to clean is the inside not the outside 😂😂😂
Ultrasonic will dig in to the smallest hole or crack. I’m pretty sure he did test spray or clean with seafoam.
Is it safe to submerge the fuel injectors electrical connector too?
Yes it is, it’s used for pcbs very widely
It is safe to submerge the fuel injectors just don't spec them to work ever again😂
No.1 clean
Nice
Thanks
The dirty carbon can be inside of fuel injector.
Thats why on solenoid style you pull the pentils out
do you just force pull or ??
@@jacobwebb8818
@@jacobwebb8818looked like nor dipped when in mud😂
What is the exact brand name of the injector cleaning machine?
Ultrasonic cleaner
What solvent did you use
wee
can I also use brake cleaner liquid for this?
No, I used it and it's not that good like carb cleaner
Link to everything used in the video..?
Ultrasonic Cleaner: s.click.aliexpress.com/e/_AFalG9
for cleaner, i used, seafoam, valve cleaner by liqui moly or Heet cleaner
That's exactly an approach that was used for all 6 injectors for my Subaru, and after that, they started leaking slowling. Do not do that like in a video! Not all ijectors will survive.
o rings maybe not replaced
Menurut saya, Injectors itu memerlukan masa yang lama sehingga mencapai tahap seburuk itu. Tiada bahan dapat membuatnya baru dalam masa 5 minit .Proses ini mungkin lebih dari 5 minit.🤔
Best way to clean injectors is with EGR cleaner sprayed through electrically activated injector. This is not a safe way to clean them.
Need to degass the fluid first to get better result
well it certainly cleaned the outside.....
Cleaning the outside of the injectors mate
Destroyed my injectors
How
@@3500camarz it got jammed up i had to reclean them myself with injector cleaner used in fuel tanks and i left them there for some time and i shake them also then it was a matter of hitting them while pulsing 12v
@@marlo0oty213 SO, how did that distroy them?????
@@tomsurrey2252 injectors fail in two ways either jamming up or burning the coil inside. Mine was jammed because when the cleaning happens it can move large amount of dirt to the opening whole which can cause the solenoid to be stuck open/close
Golly those are going to flow fuel so much better with a clean outer shell,it will just atomize the fuel perfectly now having not been cleaned out on the inside with pressurized cleaner.
I think when my air filter is clogged i will armor all my engine bay insted of changing it. Lmao 🤣
I wonder if I could turn my DI engine in an ultrasonic device, have to get a valve reseated only 60k miles, and only put 700 on it ourselves.
does it dry out the seals
the only thing can damage the seals are harmfull chemicals so ita a 50/50 if it survives it runs good
The O rings? Yes
I will wonder if the ultrasonic vibrations will damage the solenoids?
I've read that if the tank is metal then place something like plastic, between the injector and metal bottom or, if it's a plastic tank then it should be ok!
Yeah I dunno if you wanna submerge them like that
i do things like that
You don't put the electrical part inside the liquid
Its not water
you can if the liquid is dielectric
The electrical part of that is not gonna work after dowsing in liquid
Great video for those of us that want to learn simple DYS! I see negative comments from people. The haters will always hate. But great videos I became your subscriber.
Thanks, appreciate that, no matter how good is the video, someone will complain , that's ok 😅
Did the injectors work after this? Test them?
watch how to screw up injectors by submerging them fully so that the solvent gets inside the electrical side of them. great work making a video how not to do this!
It's completely sealed, if not, how it stand up from fuel pressure 😅
When the video switches screens like that, it's very easy for someone to say it was however many minutes or hrs or days that they wanted to say...lol. Also it's a possibility that the injectors were swapped out for new 1's...😂
I show how I cleaned in detailed video, sometimes I get thing like that or im been paid from a product company 😅
@@AliMECH lmfao 🤣
Works great.....on the outside.
Thanks
Работают после ультразвука ? 😂
Yes, longer video on my channel when I show the whole process and turning on the engine
Could have removed the o rings before.
He used new ones
This trap will destroy Solenoid inside injector😂
Like New 👍😃
Thank you! Cheers!
Only on the outside .
what liquid clener, did you use?
how long did it take?
If it’s “regular” car just buy new ones
ما هو إسم هذا الجهاز ؟
Ultrasonic cleaner
Если моете форсунки ультразвуком, не забывайте потом проверять их на герметичность. Если форсунка потеряла герметичность и вы поставили её на мотор, есть возможность потом попасть на капиталку мотора в результате гидроудара.
This doesn't do anything. You gotta open them up with some voltage first, dingus.
Yes it does, it cleand the outside.
@@osmopenttila2280It’s cleaning the inside that matters.
maybe that's video #2 DINGUS!
Thats not a ultrasonic cleaner thats just a bowl with a small vibration motor
electric part under water? than with ultrasonic they will not spry the same quantity of fuel so go to trough them out now, you destroyed them
No fluid name.???
Seafoam
Inside is not clean need to put 12v battery to open the hole inside the injector for atleast 5 mins
ما هي هذي الماده
Seafoam
منظف كربريتر عادي مايضر
Отличный способ убить форсунки! Кто их целиком погружает???
Not the same order he looks fake
Just replace them they are not that expensive and most cars replacing injectors is easy job, just like most things they have a lifespan point where they have to be replaced so don't be a bad owner and replace.
Mines $400 to replace all 8 :(
@@zeropower1688 tf u drive dude, a lambo? You must be driving a lux veh for that money
@@elnewbie2611 nah 2004 grand marquis and they can run anywhere from $50 - $80 per injector and I have 8 of them so it’s it cheap
So I got a fuel injector cleaning test kit and some new filters cause I already dropped money on the tools, fuel filter, spark plugs, and two upstream o2 sensors so definitely going to clean them instead of dropping another $400+
Just buy new injectors.
Im almost certain you are not supposed to place the electrical part into the solution
essa maquina e fraca pra limpar
Bro, you better hope it didn’t destroy the sensor
What sensor?
What sensor
Hack
So...ultrasonic is vary similar to a vibratory cleaner.
Yes, it's vibrator but faster
is it just me or does that injector cleaner looks like warm beer.
Hello..bro
Where I can buy his ultrasonic cleaning tools and same as you use..
Ultrasonic Cleaner: s.click.aliexpress.com/e/_AFalG9
Tepid pee
Injector cleaning use the petrol msg replay me plz