My Girlfriend Bought a Skid Steer! Bobcat T190 repairs and service

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 มี.ค. 2020
  • Sarah bought a 2007 Bobcat T190 Skidsteer. This video shows us doing some small repairs and general maintenance. We changed the engine oil and filter, fuel filter, both hydraulic filters, and both case drain filters. Also changed the outer bearing fluid in the drive motors. I also try and show how to take a track off by yourself.
  • ภาพยนตร์และแอนิเมชัน

ความคิดเห็น • 32

  • @jamesbagos3459
    @jamesbagos3459 ปีที่แล้ว +1

    I welded a sacrificial socket onto a 2” x 1/2” thick flat bar about 18” long then used a 6’ long cheater pipe over the end of it to loosen the sprocket nuts. Also replace those plugs in the sprocket drive after putting in that 2 Oz of oil.

  • @michaelvollmer9491
    @michaelvollmer9491 3 ปีที่แล้ว +1

    Nice done. Like, you have done the job and check everything before it is going to service. Your girl would be quite happy to have a pationed mechanic 👍

  • @diyhomeowner3879
    @diyhomeowner3879 4 ปีที่แล้ว +5

    So, I have done this on mine a couple of times. When you change the oil in the hubs, boil some water and then let the bottle of oil sit in there to thin the oil. Seemed to help speed up the process a little bit.

    • @davesilvia9711
      @davesilvia9711 4 ปีที่แล้ว

      and magnetic plugs are a good indication of any metal damage.

  • @gravedigger1960
    @gravedigger1960 3 ปีที่แล้ว +2

    Hands under the bucket aligning the bracket...WOW that was crazy ! Also might want to check the valve on the press, it is leaking or the seals are. You could see it doing down, then leaking back up with each pump.

  • @ericfraser7543
    @ericfraser7543 2 ปีที่แล้ว +1

    Compressed air in the dipstick hole will get that oil flowing for you quicker if in a time crunch.

  • @FioreAnello
    @FioreAnello 6 หลายเดือนก่อน

    U got the idea but use 1.5”x1.5” wood and stop as it reaches the front sprocket

  • @bhermon265
    @bhermon265 3 ปีที่แล้ว +2

    Great video 👍

  • @doug.cochran3365
    @doug.cochran3365 3 ปีที่แล้ว +7

    Love the tee shirt

  • @tideslider664
    @tideslider664 3 ปีที่แล้ว

    sweet i need one

  • @michaelanthony3816
    @michaelanthony3816 2 ปีที่แล้ว

    Put the hours off the meters so you can change the filter at proper time date them also.good luck

    • @ericbrinson9741
      @ericbrinson9741  2 ปีที่แล้ว

      I have a book I write all that stuff down in. It’s important to keep track of all that stuff

  • @garydungelman6530
    @garydungelman6530 3 ปีที่แล้ว

    Do you know what happens to particle board furniture after a couple years,?

  • @Jelmer1212
    @Jelmer1212 ปีที่แล้ว

    Right idea use pipe next time instead of wood.

  • @kenskip1
    @kenskip1 4 ปีที่แล้ว +4

    I wish my wife would buy me something like this. How many hours are on it? How were the rollers? Kubota or Yanmar engine? Great video, Ken

    • @ericbrinson9741
      @ericbrinson9741  4 ปีที่แล้ว +2

      Ken Thanks, it’s got 4300 hours on it, rollers are all tight. The engine is a Kubota and it runs very well

  • @joedirte716
    @joedirte716 2 ปีที่แล้ว +2

    Nice renegade

  • @brucebonkowski7253
    @brucebonkowski7253 2 ปีที่แล้ว

    Hey Eric
    While it's inside why not wirebrush those sides and prime and get Rusteloum black.paint matte or gloss preserve next check website Chem X they have A great bio.degreaser and a product called snake oil conditioner spray after wash let sit 5mins rinse keeps dirt mud snow rain rolling off

    • @ericbrinson9741
      @ericbrinson9741  2 ปีที่แล้ว

      Thanks I’ll have to check that stuff out

    • @brucebonkowski7253
      @brucebonkowski7253 2 ปีที่แล้ว

      @@ericbrinson9741 if you have machine in your shop Air compressor mower check on rusteloum Hammerite paint

  • @davidzamora4423
    @davidzamora4423 2 ปีที่แล้ว

    I like that. Your girlfriend buys you the skidsteer. And she doesn't help you.

  • @dustinboyd7568
    @dustinboyd7568 ปีที่แล้ว

    Did you change the hydro oil or just the filter?

    • @ericbrinson9741
      @ericbrinson9741  ปีที่แล้ว

      Just the filter in that video, I changed the hyd oil and filter this summer when I serviced it though

  • @user-ke2ii8jj8m
    @user-ke2ii8jj8m 2 ปีที่แล้ว

    Скажи пожалуйста сколько расход топлива в час на этом тракторе. Говорят что на гусеницах расход намного больше чем на тракторе с колесами.

  • @SoleEpiphany
    @SoleEpiphany 3 ปีที่แล้ว +3

    I feel like Camarata did the landscaping here a while back.

    • @ericbrinson9741
      @ericbrinson9741  3 ปีที่แล้ว +3

      No he didn’t but it would be funny if he did. I did all the landscaping around my house

  • @dalemasyk1583
    @dalemasyk1583 3 ปีที่แล้ว +2

    hmmmm your girlfreind should be right with you doing all theses basic-regreasein , n clean each aerea ...its a good way to know your machine .....UNLESS she bought it for you then thats a different ...statement..my girlfreind bought a skid steer bobcat bla bla bla .

  • @jmistret419
    @jmistret419 2 ปีที่แล้ว

    Gotta teach sarah to not put the angle grinder face down like that. Dangerous

  • @davidcoffee4678
    @davidcoffee4678 3 ปีที่แล้ว

    You forgot to wear your safety glasses

  • @dalepoppenhagen8549
    @dalepoppenhagen8549 2 ปีที่แล้ว

    I don't know why your girlfriend isn't helping with her bobcat skid steer

    • @ericbrinson9741
      @ericbrinson9741  2 ปีที่แล้ว

      She’s helps all the time she just doesn’t care to be on camera