Would this product work with a kitchen sink? I don't know what the last person used that refinished the sink, but it is now pealing. I think it has to do with using hot water especially from boiling water. Can this product handle that? Thanks
Yes, our product work on the sink. Our product handle boiling water, the temperature of the water is not a big deal for your surface after the product cure
what if i only want to do a portion of the tub? is that doable or will it not work? i live in an apartment complex and i dont own the place. so im trying to avoid creating a bigger problem by not removing all of the original paint. I just want to repair a section of the tub, the spout and drain portion, that is where my problem is. any advise?
You are able to do a portion of your tub. But the color of our product not be matched your old paint. And also we sink you need experience working with this product to do this job.
As a nurse, I worry about your lung. The toxin from the paint will cause lung problems. You should have worn a resperator. Otherwise, you did a great job!
We take care of our consumer. Our product is fully tested in a lab in the US. Our paint has the status ZERO VOC(it's mean our product completely odorless and harmful fumes).
While the product may be very good ,and he results very pleasing , I see it. fraught with consequences for a first time user who is barely proficient with a rattle can and /or a paint brush . Professionals ,or those with experience ,always make any a project look easy and simple . I can only imgine how many times someone leaning over the edge of the tube to work on the wall side or the bottom willl lean into the outer edge. Coul a greenhorn pull it off..? Yah..I beleive so , but most likely not if they arent a veteran DIY,er. Not complaimg about the product mind you....just the inference that anybody can do it and do it well. I can only imagine the mess that would be made by most of the people that would decide to take it on. I noticed there are no comments from anyone who has used it which makes me wonder if anyone has decided to dive in and give it a go.
Not only professional do this. Because for DYIers we increased working time for application you no need rush you have 1 hours 40 minutes for sure. Professional do this job for 40 minutes. if you worried about the mess it' ok. If you are follow the instruction and cover the floor with the plastic and tape the drain. All should be ok. Or your have the different way when you place order and received product open the box, take tools. Take detergent what you use in you washer, and plastic cup, and little bit practice with this. And after that you are have performance about how product run. and how to use spreader. After this you able work with our material. Just clean the tools.
I have used it on about 6 occasions. It's extremely messy and very demanding on the back since you are bent over for about an hour and a half non-stop. If you cover the entire floor and use a belt for your lower back, it goes quite alright. Only need to follow the instructions by the book without improvising. It does have an odor but nothing anywhere near unpleasant. It does make the air a bit heavy but if ventilating properly, it's definitely undetectable I would say. Hardest part is to make the bottom flow even.. If too much is on the walls and doesn't go down adequately, once it begins to dry and you no longer touch it, weird sags might appear (happened on my second and 6th attempt but it almost looked like a surface defect rather then a dripping paint so it passed). If too thick, the ammount of bubbles in the coating is insane and you need to heat gun it a lot, however that accelerates the drying so most probably this caused the sags. Overall, I'm very happy with the results of this product and again, the instructions need to be followed exactly every time!!! Also never forget that it's a polymer. If you drop something on it it will chip and if you use abrasives it will scratch
Other users report this product had chemical reactions that turned the finish blackish in the finish that couldn't be removed. Always read user reviews.
this is awesome. I refinish bath tubs for a living... how long does this process take generally? id love to try this out instead of spraying im tired of all the VOCs in all of the chemicals and materials i have to use for spraying.
I've scraped a lot of "pour over" finishes off tubs and they look horrible in person. HVLP is the only way to get the smoothest finish. You'll be giving me a lot of strip and finish work 😂
It completely different product because we have our formula we work on this formula and every time improve it. We not just sell the product, we know how this product work. We have a different applicathion method. And many difference with ekopel.
@@ArmoGlaze I took a nice and long time to decide on which product to go with but ultimately you responding is the reason why I'm going with your product versus Ekopel. There's other reasons but that is a big one ... and Illinois 🙂 Hope to put up a video on my journey when it gets warmer.
You right. But we hope our method how apply paint much easier than spray, an different methods. And we try provide quick response if customer have a questions. You have opportunity to do it. Best Regards Armoglaze Team
I doubt the claims this is non-toxic with no fumes or VOCs. Visiting the companies website appears with broken English and terrible grammar, no address, no company info like who the owners are and where ... which is a #1 indicator its a chinese chemical factory making and selling this compound. I'd be very weary about it.
Thank you for your opinion. But we are not a Chinese company. We do not speak fluently in English (this is not our main language), and this is our bad. We redo our website. And improve all our text in 3 months. Sorry if it's causing some problems. We are located in Chicago. And we add all the information about our location on our new website. Thank you for understanding.
Good luck with that job you'll be scraping it and redoing it every 5 months I'm in the business of been doing it for 35 years without acid etching you're not going to have a good job
Hello, Patrick. We are glad to hear your opinion. We don't want you to feel uncomfortable with our method. Because you have a lot of experience. But our formula has a good adhesion with a different surface. It's proven on more than 14000 bathtubs with our service team.
This is the best tutorial I have seen by far!
Your feedback is very important to us.
Best Regards
ArmoGlaze Team
You’re really a genius & just changed the game. This is exactly what l was looking for thank you ☺️
Thank you
@ArmoGlaze can you add colors or flakes to the armoglaze?
@ArmoGlaze can you add colors or flakes to the armoglaze?
I did it. Bathtub now looks almost perfect. Before I used products from home depot. It was a big mistake. Product from home depot lasted for 2 years.
BEST video on this so glad I found it I’m def giving this a try 4:23
I am definitely going to try this . The bathtub I have is fine but yellowed .. I can’t wait to try ! Will make a video for sure and post
Glad to hear it. No worries. If you buy this product if you have a questions just call us and we help you
Did you do it?
I just want to name this .."Amazing"
looks good however this tube doesn't even need to be refinished.Mine looks like it blasted with a shotg..n..What about chips in paint?
It’s a glaze that hardens. Not a paint.
Lmao on no dude. You ever get to do this?
If you think this bathtub does not need to refinish. Actually, why do you ask about chips? If this tub is perfect for you:)
Can you recommend someone in the Pensacola area that would do this?
You are honestly the Best person I have ever seen like wow.....since day 1! I loved all the Videos you share
Would this product work with a kitchen sink? I don't know what the last person used that refinished the sink, but it is now pealing. I think it has to do with using hot water especially from boiling water. Can this product handle that?
Thanks
Yes, our product work on the sink. Our product handle boiling water, the temperature of the water is not a big deal for your surface after the product cure
Fairly love the caption. Delightful♥ video too
what if i only want to do a portion of the tub? is that doable or will it not work? i live in an apartment complex and i dont own the place. so im trying to avoid creating a bigger problem by not removing all of the original paint. I just want to repair a section of the tub, the spout and drain portion, that is where my problem is. any advise?
You are able to do a portion of your tub. But the color of our product not be matched your old paint. And also we sink you need experience working with this product to do this job.
It's amazing method of reglazing a bathtub.
thank you
I'm watching this video 4 years after it's making. Can you tell me how or if this tub has lasted?
We not follow this tub, but we follow shower base ( also 4 years ago) , it is doing well.
I really love your work, very neatly done.
Your feedback is very important to us.
Best Regards
ArmoGlaze Team
As a nurse, I worry about your lung. The toxin from the paint will cause lung problems. You should have worn a resperator. Otherwise, you did a great job!
the website has it as being odorless...
We take care of our consumer. Our product is fully tested in a lab in the US. Our paint has the status ZERO VOC(it's mean our product completely odorless and harmful fumes).
It's Everything I Hoped For
While the product may be very good ,and he results very pleasing , I see it. fraught with consequences for a first time user who is barely proficient with a rattle can and /or a paint brush .
Professionals ,or those with experience ,always make any a project look easy and simple .
I can only imgine how many times someone leaning over the edge of the tube to work on the wall side or the bottom willl lean into the outer edge.
Coul a greenhorn pull it off..? Yah..I beleive so , but most likely not if they arent a veteran DIY,er.
Not complaimg about the product mind you....just the inference that anybody can do it and do it well. I can only imagine the mess that would be made by most of the people that would decide to take it on.
I noticed there are no comments from anyone who has used it which makes me wonder if anyone has decided to dive in and give it a go.
Not only professional do this. Because for DYIers we increased working time for application you no need rush you have 1 hours 40 minutes for sure. Professional do this job for 40 minutes. if you worried about the mess it' ok. If you are follow the instruction and cover the floor with the plastic and tape the drain. All should be ok. Or your have the different way when you place order and received product open the box, take tools. Take detergent what you use in you washer, and plastic cup, and little bit practice with this. And after that you are have performance about how product run. and how to use spreader. After this you able work with our material. Just clean the tools.
I have used it on about 6 occasions. It's extremely messy and very demanding on the back since you are bent over for about an hour and a half non-stop. If you cover the entire floor and use a belt for your lower back, it goes quite alright. Only need to follow the instructions by the book without improvising. It does have an odor but nothing anywhere near unpleasant. It does make the air a bit heavy but if ventilating properly, it's definitely undetectable I would say. Hardest part is to make the bottom flow even.. If too much is on the walls and doesn't go down adequately, once it begins to dry and you no longer touch it, weird sags might appear (happened on my second and 6th attempt but it almost looked like a surface defect rather then a dripping paint so it passed). If too thick, the ammount of bubbles in the coating is insane and you need to heat gun it a lot, however that accelerates the drying so most probably this caused the sags. Overall, I'm very happy with the results of this product and again, the instructions need to be followed exactly every time!!! Also never forget that it's a polymer. If you drop something on it it will chip and if you use abrasives it will scratch
Have a feeling this requires more than casual skill. Is this something for the DIYer?
Yes. This product completely work for DIYers. Our consumers do it by himself. If they have a questions we help with problem.
I’m in a rental where the landlord seemingly doesn’t care about cosmetic issues. I’m wondering I can just do a touch up lol
Worthy Of An Oscar
Can an engine block be glazed with Amorglaz ?
Hi, his long does this take start to finish?
3-4 hours
Thank you!
Other users report this product had chemical reactions that turned the finish blackish in the finish that couldn't be removed. Always read user reviews.
where we able to see this reports. It not true. Because we have refinishing company and we don't see this issue on more than 1000 bathtub.
Can i reglaze tile in a bathtub too?
Tremendously amazing💖 Video
this is awesome. I refinish bath tubs for a living... how long does this process take generally? id love to try this out instead of spraying im tired of all the VOCs in all of the chemicals and materials i have to use for spraying.
Our application method takes 3 hours with preparation.
I've scraped a lot of "pour over" finishes off tubs and they look horrible in person.
HVLP is the only way to get the smoothest finish.
You'll be giving me a lot of strip and finish work 😂
@ReglazeRX we spray our tubs. Acid wash, sand, priner and top coat
What is this product
Is this like the ekopel? You can actually sand or scrape the ekopel & it won't damage. Is it the same prices as ekopel?
It completely different product because we have our formula we work on this formula and every time improve it. We not just sell the product, we know how this product work. We have a different applicathion method. And many difference with ekopel.
Can use an epoxy 4 inch nap to help lay the product out?
No, Just spreaders
Must have took a while to type all these comments 🥴
I believe you are correct. All the same person making these replies
lol most of these channels were made on the same day. Not suspicious at all
Will hair dye stain it? I have red hair
stupendaaaa,Super ! You are so striking!☀
Omfg!! Amazing video You were stunning thanks For Sharing
What’s the link for me to buy this
you able to find this product on Amazon or on our website armoglaze.net
Very beautiful❇
What is the material apoxy or paint and can this be rolled or Brushed?
our material based on epoxy resin. Our material can't be rolled or brushed
One question sir , on what temperature you using the heat gun ?
We use heat gun without thermometer. This heat gun just have a two position. We use "MAX" position.
Best Regards
Armoglaze Team
@@ArmoGlaze thank you for the answer 🙏👍
thanks for the video, the guy at Lowe's told me to repaint over the peel off area wth smh
If you any questions about application or preparation you can call us 224-616-1766
Hey is it normal that dust gets on your hand when you slide your hand over the finished bathtub?
If you run your hand on top of the cabinet in the kitchen, you will also have dust on your hand.
Best Regards
ArmoGlaze Team
Will this product work on fiberglass or plastic ?
Yes it's this product work with this kind of surface
Will this chip with use? If I clean my tub with bleach will it chip?
No, it doesn't chip, doesn't peel off.
Best Regards
Armoglaze Team
@@ArmoGlaze Thank you, very much
The tiles are eye sore with that color?
Nice job, but do you need to place a sealant usually epoxy after painting?
Mean caulking?, if you have space between tub and tile, yes.
Marvelous 🙌
Very exquisite💎💎💎
Are you the US Ekopel 2k or is Ekopel 2k the EU ArmoGlaze?
We not the Ekopel. It's our product and our formula. You able to see our product name Armoglaze. And we created this product and application process.
@@ArmoGlaze Thank you!
@@ArmoGlaze I took a nice and long time to decide on which product to go with but ultimately you responding is the reason why I'm going with your product versus Ekopel.
There's other reasons but that is a big one ... and Illinois 🙂
Hope to put up a video on my journey when it gets warmer.
Does this work on ceramic tile?
Yes, it's work very well.
Best Regards
Armoglaze Team
@@ArmoGlaze you mean on ceramic tile? I want to cover a nasty looking tile window sill.
How long does it last? Anyone here actually use this product? How long is it lasting??
5 years for sure for residential place
@@ArmoGlaze ; Whoa, okay, that'll work for me. Thanks!
Magnificent 💞💞💞💞
how much it coast？for renew
This depends on where you are located, what kind of bathtubs you have, and the condition of the bathtubs. Price will be at 395 to 700
Can I add a different color paint?
You can. But we not tested product with coloring agent.
Best Regards
ArmoGlaze Team
Such Wonderful
💚💚💚 😊thank 🆘 much for sharing your
🙌 lovely 😘😘
Adorable🦋
Incredible
Good video
amazing💮
Can this be applied with a HLVP gun?
Sorry. This paint cannot be applied with a HVLP gun.
🥇 Rate work😊😊
Ajax isn’t pronounced “axe” it’s a-jacks.
But the soccer team is spelled the same way and is pronounced axe?
Thank you
nice🔥🔥
fab, How are you doing?
Good view
Love It💕👍
How long this last
5 years for sure for residential place
Perfect ♡
Nice🐞🏵
omg💛
woOoOw 😱😱♥️😱😱
This is good work, friend #Swag
Cool😎
nice👌👌👌👌👌👌
Video💙Wow
👏
sweet😋😚👍
yeah right lol..
💖💖💖
😻😻😻😻woah
Ajax....
Yep, (AFC Ajax)
👍😍
Just because anyone CAN do it doesn't mean anyone SHOULD do it🤣
You right. But we hope our method how apply paint much easier than spray, an different methods. And we try provide quick response if customer have a questions. You have opportunity to do it.
Best Regards
Armoglaze Team
💪😉
💜👌🏻💜👌🏻
💐💖💐
I doubt the claims this is non-toxic with no fumes or VOCs. Visiting the companies website appears with broken English and terrible grammar, no address, no company info like who the owners are and where ... which is a #1 indicator its a chinese chemical factory making and selling this compound. I'd be very weary about it.
Thank you for your opinion. But we are not a Chinese company. We do not speak fluently in English (this is not our main language), and this is our bad. We redo our website. And improve all our text in 3 months. Sorry if it's causing some problems. We are located in Chicago. And we add all the information about our location on our new website. Thank you for understanding.
👌👌👌🌹🌹🌹🌹🌹🌹
D ⭕ P E 🔺
Good luck with that job you'll be scraping it and redoing it every 5 months I'm in the business of been doing it for 35 years without acid etching you're not going to have a good job
Hello, Patrick. We are glad to hear your opinion. We don't want you to feel uncomfortable with our method. Because you have a lot of experience. But our formula has a good adhesion with a different surface. It's proven on more than 14000 bathtubs with our service team.
what a mess
we need mess before perfection came
Drives me nuts everytime he calls it paint
perfection 🔥🔥🔥🔥
Very exquisite💎💎💎