Micro MinimOSD Review/Setup and FPV flight test
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2015
- Here's my review (of sorts) of the Micro MinimOSD, something you can put on your 250 and more usefully use it to mess about with your PID settings.
I like it a lot, despite managing to blow one up (but that's my fault)
Some links from the video -
Here's where you can get the OSD (affiliate link) -
www.banggood.com/MICRO-MinimOS...
The excellent MWOSD firmware
www.mwosd.com/
...and don't forget the FAQ (I hit two problems that were covered in this, but I ended up in the main docs directory in Github and missed it)
github.com/ShikOfTheRa/scarab...
Here's Oscar Liang's excellent blog
blog.oscarliang.net/
...and this is the link to his document about setting up the micro
blog.oscarliang.net/minimosd-m...
Thanks for posting this!
Great overview. Minim is awesome with PH/APM and it's sweet to see it shrunk so small for the lil machines.
Very usefull info CK :) Thanks for posting, good job.
Nice review again Wayne
Great video!
Thank you , I have one enroute from banggood to have a tinker with and your review couldn't have come at a better time.
thanks again oscar laing...... the vaguest problems i ever hit, google found oscar
Yes in the mwosd gui
Do you have your pids up somewhere? your rolls look fast. Just ordered the 4th naze and got the deluxe with gps and micro osd and power dist.
Nice Video Great advise and info. At first thoughts like you I thought why would I want a OSD in my 250 and nowI WANT 1 :DBy the way What recorder do you use for the FPV camera
to set up voltage trough the flight controller do you have to set up anything in cleanflight?
Is there any way that you are aware of to change the position of the bat voltage to a different location on the screen using the Taranis? I ask because re programming my board means quite a bit of time taking my quad apart and I would like to avoid if possible thanks!
If I have just the Naze32 Acro which options will work in it???
Hi guys I have i problem ,after the eprom clear it doesn't upload to board can some one help we
Cheers mate, excellent and informative video! I bought one of these from Banggood, and managed to fry my VTx on the first connection!
I'm having trouble getting into the menu doing the stick movements, I get the boot screen when I power up then I get DISARMED which alternates to NO DATA, any help is appreciated, thanks.
do I need the Filter for Rssi on standard minimosd?
Massive shame it's not flashed already. Can any other dongles be used rather than an arduino?
Can you put custom text on the screen, my name for example?
How do I configure ports in betaflight? Wich UART should i use? Help me