วีดีโอ

Anodized

Im not super handy but I may try this. How long of a cable would I need for a 12 foot wide garage?

I have a shaft with a pxg adapter already attached to it that I'm looking to put on a pxg 3 hybrid head. Do I need to epoxy the shaft into the club head? Or is the screw all that is necessary to hold the shaft and adapter to the club head?

Is there any issues with an older style head & shaft attachment where there is 2 inches of wound wire on the outside where the clubhead meets the shaft. It does have a graphite shaft into a full carbon head. Even though it is the "old school" method, the club is a 2004. Thanks

Do I need a shaft puller I have a clamp at the work shop .... Just bought a ping answer head adjustable I need to switch it out and replace my 907d .... I love my 65 s aldila nv shaft

How tall is the white area? What height did you attach the cable at? Can you hit wedges without them going over? Great videos.

I know this is an old video, but no righty vs lefty hacks I can find on TH-cam

I’m a lefty, but my son is righty and has several shafts……both hit callaways. So If I put one of his righty shafts in my lefty driver, I have essentially made the exact swap correct? So to deloft my 9 to a 7, I use the +2 mark? Great video btw!

I picked up a set of these for $75 on marketplace last week, 3-SW, black dot. So far I am loving them. The heads look so big when you are standing over them. I call them meat cleavers. I seem to have an easier time hitting the ball in the air and straighter, and the thin shots do not kill my hands.

Just got my set! About to put them on my clubs! Thank you for your help!

And im back to my Zing 2 irons... Lost my swing with newer irons... Put the trusty Zing 2's back in the bag and got it back just like that 😂 high and straight with so much control ❤

Made it look an absolute doddle. Nice work 👍

An inch of graphite only weights a few grams. Why add back so Much weight?

I went to watch Westwood play a pre British Open practice round on The Royal Liverpool Golf Course years ago (around 1999) and he had the copper version of these irons in his bag.

Great idea. Any solutions as to what someone could do for overhead net install to avoid scoops/hit wedges? While not disturbing the garage door from opening and closing of course

SUPERB. !!!

Great tips !! I did a little reaming and soaked in hot water just to make it slide . The hint of epoxy also is key! Thanx ! Simple

I got fitted for my irons my height 6'1 and wrist to floor in between 37-38 inchs club length +1/2 inch club lie angle + 3° upright so should I play standard lie and length 56° wedge or set them up like my irons this is confusing any feed bach would help thanks.

Greetings, this measurement is in millimeters, centimeters or how to know, I have a caliper and I don't know if this will help me to know. thank you

Be careful with heating ferrules with a torch or heat gun. You can stiffen the feels to much and cause it to distort when installing it.

There needs to be dynamic and static (separate) swing weight standards.

Hello. If I changed both rings would that change shaft to left handed.

Here is a thought to for older golfers who may live their clubs but cannot get much out of them like they used to. Re-shaft to senior shafts. I got into club making way back in the 80s. Now I just do things with and for my clubs, what I want to experiment with. Sometimes I will help someone if they really need it. Most golfers have too stiff of a flex to the shafts. Seriously, if your swing speed has not been checked in a while, it is worth popping into a mega golf store and having quick analysis. If you are in the 80s, a senior flex can really help you get height and distance. I used R flex when my swing was in the 90s. Sure, lots of folks said you need a stiff. No I did not. I tried both and the R gave me the best distance. Same for the senior flex now. I also use a 3W, 5W, 7W and 9W. My irons start at 7. Swing easy, hit farther and more consistently. It works. Happy golfing trails all.

I always fixed it the wrong way. Will do this for now on

Ryan can you buy the correct adaptor for the callaway shaft to fit the crank head ?

Best irons ever made

I still play mine. They are great. I regrip as needed.

What if the head does not vibrate/rattle and the shaft does not either... Put them together and there is the vibration/rattle?

Brilliant!!!! Thanks Boss, I'll be a mid launch menace now with 8.5 triple diamond!

What happens to the lie? I am a lefty, looking to flatten the lie as well as reduce loft. Most adjustments I have seen (for Callaway anyway) always make the clubs more upright. Any clarrity on this?

I already knew of this technique for irons. Now show us how to do it with an old driver head .335 tip. Hard to find a steel shaft thatll fit lmao

Wouldn't it theoretically work to just flip the cogs upside down?

Hi can you add an after market counter balance weight to the butt end to help lower the swing weight and make the head feel lighter?

boiling water is a great tip. thanks

If you torch the tip of the shaft before inserting and spinning it really helps with the stuck ones!

Where did you get the white net? Nice set up!

Have you hit any worm burners? How did the netting react? Thinking of doing something like this and worried that a low mis-hit is going to go underneath the netting and hit whatever is behind.

putting a midsize grip will add 10g to the grip end 🙂

Thanks for the video. Did you use 1/8" cable or 1/16" cable?

Adding lead tape changes the feel depending where lead tape is placed. Better to drill a hole in the hosel and stuff , poly stuffing (cushion filling). The poly stuffing spreads out evenly within the club head cavity. ie doesnt significantly change the COG of the clubhead as lead tape or 'melt' does

Says he has a super easy way to measure epoxy and then says take your scale. That's not easy if you don't have one. Thought he had a simple way to eyeballing it.

never hit the ceiling?

Thank you so much for your review I haven’t swung a club in ages. I love older clubs and want to invest in an old set of clubs and focus more on being a better skilled player. You’ve made me a fan I love your content I’m subscribed with the notification bell clicked on. I look forward to seeing more content from you 👍🏻

Really Good irons, even better than the Eye 2. I think. With modern shafts in them they feel really good to hit as well.

Awesome video- just a couple clarifying questions for us newbies: 1) Is this the same process if using on a .355 shaft which the ferrule was designed for? 2) Obviously, wouldn’t need to bore the ferrule out, but would you still heat in boiling water? 3)What’s the best way to remove the old ferrules? 4) Do you epoxy the ferrules in place against the club head, or just the club head (as usual)? 5) What did you mean at the end of the video by “once it dries all I have to do is turn that ferrule down”? Thank you for your clarification!

Don't do this to your driver if you have it dialed in.

RB, you're a genius. What would I do with you and @Mike Matrysewicz?

Happy you get to the 👉 Some of the other guys go on & on.. they bore me 😂

Can u do the same for driver or no

I agree with your assessment on the True Temper Elevate VSS shafts. The Elevate 95 is also good for moderate to slow swingers that prefer steel to graphite. A very smooth shaft.