Kraus X ODI T-bar Install & Review 2024 Harley Davidson Road Glide
ฝัง
- เผยแพร่เมื่อ 9 เม.ย. 2024
- In today's video we go over purchasing a set of Kraus T-bar risers and ODI mid bend bars, figure out how to install them, and go over a review of what you can expect with various applications.
If you have any questions, comments, concerns, please leave them down below and I will get back to you!
As always, thanks for watching!!
Heading West by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/... - ยานยนต์และพาหนะ
Not the red lock tight! Really like your videos keep making more.
Thanks brotha, will do!🙌
Krauss makes nice stuff . The matte black bars go with the interior of the fairing . Looks great !!!
Yeah it’s growing on me, I’ll probably leave them, thanks for watching!🙌
i think the set up looks great- the flat black with the glossy controls accents the inner fairing well IMO. great video man.
I agree, thank you for the support and watching brotha!⚡️🤝
Nice! I love your content! I just ordered the Original Garage Risers and Thrashin handlebars. Thrashin made bars specific for the new '24 since the throttle is different. I went with the OG risers because you can tuck wires in risers for a cleaner look.
I saw Thrashin’ put those new bars out, they look good! And I like the fact you can hide the wire, I saw that style I believe on the Arlen Ness ones too!
Love the videos I’ve watched all of them and haven’t missed one yet
Thank you for watching brotha!!⚡️
The new T-bar looks great....very interesting video!
Thank you for watching!!
That bar setup looks great and really a clean look on the 24 setup.
It does look right at home on the new 24’s, love that!
Definitely need a set of socketed Allen’s. And socketed torx. Nice work! Looking good!
I have socketed torx, just need to step up the Allen game, thank you for watching!!⚡️
Good stuff 🤘⚡️🤘✨✨
Thanks for watching!!⚡️
Thanx for the mention. Awesome video
Absolutely! It was great chatting with you, as soon as I hit the road I was kickin’ myself for not catching your name!
@@OffWeekGarage my name is bruce.
I like your videos, brother… Too bad the bars aren’t gloss but then again they do match the mat finish on the plastic dash area so it’s all good. They look great.
I agree, the matte has grown on me, thanks for watching as always!!
WEPA!🔥🔥🔥
Great video! Appreciate your time.. You are better than the current USA president with one hand!! 🤳
HAHAHA I wish for our country’s sake that was a compliment. He’s gotta go.. Thanks for watching brother!🙌
Good video… I’m a fan of T-Bar setups
Thank you for watching!!
The set up looks sick man
Thanks brotha!🤝
nice clean setup!
Thanks man, stoked on how it came together!🙌
Love it.
Thank you for watching!!🍻
Great video! Looking at the same setup. You did mention these were 10” pullback risers. Just hoping to reconfirm that. Also, I assume that is the 1” ODI bar since the stock perch clamps work? Thanks!
Yes 10” pullback risers, as for the bar clamp size I’m sorry I cannot say for sure for a few days, I’m away for work til Wednesday. I can get back to you on it then!
Nice. I’m running the same setup on my 23
I love it!🙌⚡️
You did a great job.
Thank you sir!🙌
Awesome ink you got
Thank you!⚡️
After living in Kent for 31 years, i just moved to Mobile in October 2022. Have you ridden the North Cascades highway yet? If not, it's definitely a ride you will love. Especially on that new bike. Just bring some gear to stay warm, it's quite a bit higher than any other pass, so even in summer it can be a little chilly compared to temps down below. Kick ass ride though for sure.
I certainly have but not on a comfortable awesome bike like this, I will definitely try to do the loop this summer!!🙌
Fork pinch bolts as on my 17 RKS are at the max 18 foot pounds which I’m sure yours are the same
I believe it is 18-20 ft lbs!
Thanks for the video. What are you doing with the gauge relocation part of the setup?
No plans, want it?
Alki beach great place to cruise!
It is, sure has changed a lot though!!
Great video as always. Love the setup. Curious if you could pull the fork tube black covers of all the way with the triple tree off. Got hit by road debris on the right side. Hard to fix without taking the cover off.
The lower tree blocks that, so you’d have to pull that too, it’d be much easier to remove the front wheel I’m afraid..
@@OffWeekGaragethanks for your input. It’s a small dent on the upper side of the cover and is really only noticeable if searching for it. Keep up with the vids, love them!
Nice Video, Let me buy the Kraus gauge Housing and the bracket if you're not going to use it?
We can make that happen!!
Love the videos!
I see you are in Pierce County I'm up north in Snohomish County. Maybe one day we could go for a ride and make some cool videos.
I’m in Redmond. Picking up my 24 RG alpine green on the 27th. 😎
I would like to set up a local event eventually and do some group rides. Currently very busy with work and family but hope to have time to make something like that happen!
@@OffWeekGarage I hear ya man. I’ve been grinding work myself. I don’t say no to overtime. 😂
Can we get some pov riding videos now
I would love to get you covered on that!! I’m working on picking up an Insta 360 and getting creative with some more GoPro mount locations as well so I can bring out some less bland riding content. Thank you for the suggestion, I’ll film some next week off!
Hi do we really need to remove the top tree to access to the nuts? Not enough space to remove the nuts from below?
Thanks
I dont think there’s soon to get at them from underneath, there may be, but anyone I’ve seen do this now including Thrashin’ all pull the top tree.
I have the same white road glide and am also looking at the same t bar setup. Only thing I’m not sure about is the rise height. Is that an 8inch rise/kickback with ODI bars?
10”!
@@OffWeekGarage Sweet, thank you
Were those ODI bars alternated any to get them to work with the 24 road glides?
They were dremel’d a little bit up, they’re close to right but require a little lovin to make work
Did your front wheel try to roll after taking triple tree off?
Yes, you have to have it on the ground or at least supported, and you’ll have to reset the fall away with the steering head bearings with that T45 bolt. I went 12 ft lbs but didn’t want to include that in the video since everyone’s will be different
How do you like that seat? Does it move you back any? I've been thinking about getting it
I did a seat review video on it, it’s great for around town and hour to two hour rides but passenger doesn’t like it due to being stiff and narrow, so stock seat for any sort of distance!
What size do you recommend for a dude with reach that’s 6ft 4 ?? Need advice for my 2024 road glide
Man that is a good question, I am by no means an expert and the best person to give advice on this, but if I had to guess I’d say a 10” riser with minimal pullback and either midbend or highbend bar depending on your preferred hand height. Fortunately, you have a ton of adjustability with just different bar options and rotating them in the risers. My recommendation would be to get in to some dealers or bike nights and sit on as many setups you can, take into account what seats they have as well since that’ll play a role! Good luck!⚡️
Good video but you need a mic set-up, volumes goes loud to very soft.
You’re so right. Thanks for reminding me. Just ordered a DJI wireless mic!!
Get some poly bushings from thrashin gooden tites, they are the shit
I will look into them if I get sick of it, bike shakes even more with the new exhaust, but that’s okay I like it.
What size width mesh wire protecter is that?
3/4”!!
I’d go taller with the riser 😎⚡️🤙
Check out Gooden Tite bushings
Will do!!
I guess this is new style...I am from the Apes and Dragbars....Us Older Guys for performance and handling would swap out the riser bushings for stiffer ones....
That’s still the recipe for good handling! I swapped the rubber riser bushings for billet ones in this video.
@@OffWeekGarage 👍😎
Did you run stock cables?
Sure did!!!
Go exhaust next!
It’s already ordered, waiting for tracking info any day now 😈
Polyurethane all the way that’s what I put in
I may try that out if I ever care to switch!
Pee Pee Creek
Over priced junk
Ouch
Did you have to drill holes on the front side of the ODI bars to wire the controls or did you use the regular holes that are on the bottom?