BEFORE WATCHING! What do you reckon is waiting for us inside the S65 engine? Place your bets - original bearings? Copper or later updated ones? Been changed recently? About to fail?
Great video! It’s such a variation of how more or less worn the bearing are on different year builds and mileage driven. Would you attribute the excessive wear on lower mileage to be due to hard driving patterns and/or poor maintenance? • Btw, Ryan and Cat are so amazing to chat with at IND and I agree that Fall-Line parts upgrades vs stock will be the best way to go 👍🏽💯
Awesome video, it shows that these motors are capable of holding up if they receive good maintenance. Seems like the previous owner respected the car and followed the proper warm up cycle as well, which if not done could also result in failed bearings.
I wouldn’t call bearings worn down to copper as holding up...who knows what the history of the car is, but as was pointed out, if the car had been driven hard or tracked cylinder 8 could’ve gone fairly easily. But yes, it does show that the bearings can last...but bearings should still likely be changed every 50-60k miles. Probably much sooner if tracking the car regularly. What was more concerning to me is hearing that the car with only 30k miles had worse wear. Just goes to show that there is no rhyme or reason for how and why these bearings wear how they do and mileage on the car doesn’t count for much. The best you can do is try to buy a car with long term ownership and maintenance records which is pretty much the rule for any car. Then it’s still no guarantee and you better change the bearings ASAP.
@@ericm8368, these motors are notoriously know for failure due to worn bearings at a lot lower mileage. My comments were on the fact that this particular example "held up" a lot longer than most S65s. Bearing replacement on these motors are considered a maintenance item, crazy to think so I know, but unfortunately it is. 🤣
@Eric M - We believe that number of cold starts and how the car is driven whilst cold is the main contributing factor to the wear. The 30k car may have not been looked after, regularly driving hard from cold, lots of short journeys to not allow the car up to temp etc. Unfortunately it’s impossible to know how a used car has been treated in that regards. If it was directly linked to mileage it would be more simple but as this car shows it is not.
These guys did my Rod bearings on my e93 M3 last week and they did a great job. I can honestly say I trust Evolve more than I trust the BMW main dealers. These guys don't only know their stuff but they are really friendly towards their customers. Evolve are the only company I would trust with my beloved M car. FACTS!
@@EvolveAutomotive When I was at your workshop last week, I had to leave my car with you overnight. I was about to arrange an Uber so I could get to the nearest train station in order to get home when one of your staff told me to put my phone away as he would drop me to the station!!! I'm not going to lie, I was taken aback as your fella did not have to do that. It's these little touches what will keep me and other customers returning. So not only do you get a professional and trustworthy job carried out on your car, you also get great customer service. Keep up the good work Evolve. 👍
I thoroughly enjoyed watching this video. Very informative and soothing to watch at the same time. Job well done to Aston and the guys at Evolve. Can't wait for Imran to do the test drive.
I have a 2013 m3 6mt and I am eagerly watching these videos. Mine has only 28,000 miles and I am the original owner. But I am fascinated by this car and can’t wait to see what you guys do with it!
Thank you gentleman for sharing, might be a small audience for content like this but extremely appreciated, thankfully there's still some engineers and technicians out there
Well worth the wait for this one, just goes to show that if the car is well maintained and not ragged the bearings can last. When I get an E92 im bringing it to you.
Great idea for this build series. Well done to the owners of this car, it just shows mileage is just a number with proper maintenance 150k is better than 60k in some cases :)
I changed my 740 Schnitzer engine mounts a few months ago as I just like to change everything. My passenger side mount looked like yours, and exploded as it was removed! Changed the transmission mounts aswell. Used Febi Bilstein ones, fitted a treat.
Amazing first ever video I've watched from the channel and I must say that I won't stop watching vids from Evolve...however, the background tune sounds so much like 'The Game-soundtrack'.
Good that you guys maintained objectivity and demonstrated how a high mileage car that is maintained can have rod bearings that don't look bad. Motor mounts on any car with that kind of mileage will see that kind of wear.
I did mine at 90k miles with some fellow e90/2 m3 owners. I was a bit scared. The real work is the sub-frame. There was some copper showing on a few of the top bearings, but not much really. I am the original owner and now have 130k miles. I get an oil analysis at every change and the results have always been superb. It runs like new and I love it. I had to rebuild my diff and lsd recently (put in the 4:10 gearset) and all new bearings. That was much harder and less fun than doing the rod bearings.
Ok ok, I’m a little more relaxed now, my e93 has 60.000 miles on the clock and I always worry about this bearings, even tho I always warm up the engine and never rev it more than 3000 until fully warmed, Still in plan to change them soon but hard to find good trusty shops nearby. And great videos guys, I like this project and I’ll follow it closely, curious what you guys will do with it. Cheers
Amazing vlog Imran, well done to the previous owner 👍 I was dreading this being the end of the project with the thumbnail, lol. Heard so much about the rod bearings on the E92. Finally able to see some content on it and see it in action, being done. Salute to Aston mans a ///Magician legend!
I changed mine preemptively at around 75.000 miles and they were, in comparison, in a much, much better shape. The copper wasn't even exposed. I never rev the car cold and this proves, in my mind, that most engines failures is most likely a direct result of abuse from clueless owners. As with any sport cars, if you don't treat them as such they will inevitable fail.
@@EvolveAutomotive I guess most owner don't save their car for the next owner. I have no intention of selling my M3 (manufactured october 2007) so I take care of it 😁
Right, a very mabusive owner... No, but for real, I think it comes down to a few things. Oil quality, how often changed. The thickness of the oil, and the cold starts of the engine. When the engine is cold, the oil pressure is high! and this means that it is very hard on everything until it is warmed it. I always baby my N55 engine when it is cold. Always do the oil very often. Let them warm up for a long time. The rod bearings sit on a very thin layer of oil, and they are not designed to touch the crank. If the oil level is too high, or too low, they will. There are very small holes in the journals, and if the oil is too Thich, it will not do its job.
Great project and vid. I love seeing these type of series and Aston is great at explaining what he is doing and making it simple to understand. Nearly at 100k subs too. I'm sure that goal will met very shortly. Keep up the great work.
Amazing series gents. Love it!!! I remember you mentioning on one of TR Hamza's videos that you were gonna do a high mileage project. I love being able to learn some mechanics like this!!
Love how the oil coming from the rear plug was nice and amber while the oil from the front plug was black. Seeing how the rear bolt was not stock while the front was, there’s a possible chance that previous servicer, probably former owner, wasn’t aware of the front plug. My 2011 leaks right in front where oil pump is, another item I need to look at when I do my bearings.
Great video guys. I started a similar project about 2yrs ago. Bought an 09 on 123k on original bearings. Changed them straight away and looked reasonable, small amount of copper showing but nothing worrying. Interested to see where you go with this. Hopefully will show that a leggy e9x is nothing to be worried about.
I’m at 95k on my e93 M3 and I plan on changing the bearings myself but every time I drive her I let her warm up for about 15 mins just changed the oil too and she runs great!
Damn man i’m at 98k miles can’t wait to get these done one less worry in my mind. I honestly rather worry abt the trans taking a sh** then the rod bearings breaking lmao
@@EvolveAutomotive Well good to know that was a worry of mine is there anything else I should worry about besides rod bearings and the dct? Like expensive stuff yk
Hey guys I really enjoy watching all the things that you do with all the cars. As I have a E90 M3 and have done the rod bearing as you guys have and wanting to purchase some of the products offered and programs but, I am having concerns of the main bearing and what I am learning about the S65 vs the S85 - what are some of your guys thoughts?
Just digging into this series and think I'm really gonna like it. As a sidenote it's absolutely ridiculous that a ccompany the size of the Milwaukee haven't stress tested their M12 platform with the likes of their impacts for drop testing and 1000's of insert/removals of the battery and wearing of the tabs. I've seen the cable tieing of the battery quite often... Thumbs up I prefer these projects as they feel a bit more realistic to the average viewer in the UK as opposed to brand new 50k + cars upgrading their performance.
Loving watching these Eps, plan to keep my 50k 2012 92 for as long as I can, so preventative mods and potential failure parts that you guys might make to future proof them I'm very keen to see what this development car is it is will bring us 9X owners! Keep it coming!
Interesting video, and the shells were relatively good for 152k! (although some were still shot of course). I don't understand why you put new OEM bearings in it though, you'll still might well end up with too tight clearances.🤨
Because as this video shows, the OEM parts are perfectly up to the job as long as the car is correctly looked after. We recently had a 1 owner from new 223k mile E92 M3 in and they were on original rod bearings having always correctly warmed the car up before proper use.
@@EvolveAutomotive A? No it doesn't, no 8 upper shell is showing a load of copper, this should not happen until far higher mileage. Even for a high revving motor, the whole problem with the bearings on these is the high chance of insufficient clearance. The new OEM bearings don't fix this. That said, the tin/alu bearings do seem to fair better, and seeing as it's done 152k on the originals, the clearances probably aren't too bad on it.
great video ! I recently replaced my e92 m3 radiator,condensor and fan. When i started filling up my coolant noticed it leaked all the coolant from a hole thats on the drivers side of the radiator, i dont recall removing anything from there from the old radiator and by looking at your video at minute 5:50 right on top of the rusted line you can see that yours doesnt have anything connected to that hole either. Not talking about the blue drain plug. Can someone explain to me how i keep coolant from leaking from that hole.
For someone looking to get an E92 M3 and also someone who likes watching a well made maintenance video. This was absolutely 💯 Amazing video please keep these coming!! Liked and subbed :)
The rod bearings on my e92 give up at 72k and only had the car a few weeks lucky for me I bought it from a dealer so got my money back but after saving up for a while it was disheartening after wanting one for so long
I bet more than a few E9X M3s experienced spun bearings and wrote the engine off from the BMW free maintenance program they came with that also included oil changes at 25'000km intervals! Yes they nearly take 9L of oil but such an extended interval was purely to save money on BMW's part. Most Blackstone oil analysis shows the oil being good for about 10'000km which is plenty for a sports car, which means if anyone followed the recommended and included services and intervals, they would be running their high strung engine on oil that is up to two and a half times past its laboratory verified usual lifespan.
BEFORE WATCHING! What do you reckon is waiting for us inside the S65 engine?
Place your bets - original bearings? Copper or later updated ones? Been changed recently? About to fail?
Great video! It’s such a variation of how more or less worn the bearing are on different year builds and mileage driven. Would you attribute the excessive wear on lower mileage to be due to hard driving patterns and/or poor maintenance?
•
Btw, Ryan and Cat are so amazing to chat with at IND and I agree that Fall-Line parts upgrades vs stock will be the best way to go 👍🏽💯
Hi Guys, do you do engine oil flash during the procedure or just quicker oil change?
I have no idea what a rod bearing is but I guess I'm about to learn!
Wouldn’t know as it’s luck of the draw, seen 30k cars have more wear then 100k cars, no rhyme or reason
Hi Evolve Automotive ,upgraded rod bearings not available on your website anymore?
I can see OEM only…
Thanks.
No denying Astons skills as a technician.... knows his stuff 👍
Alot of knowledge and experience in that big ol head
He demonstrated the difference between a mechanic and a technician, didn’t he? Wow!
Well done the previous owner. You've given Evolve a decent platform to work on.
I found this quite therapeutic
I 2nd this
😂
I can just hear your British accent through your comment 🗿
Me too actually!
I find it useful as 2nd owner of 2011 with 56k miles.
Awesome video, it shows that these motors are capable of holding up if they receive good maintenance. Seems like the previous owner respected the car and followed the proper warm up cycle as well, which if not done could also result in failed bearings.
I wouldn’t call bearings worn down to copper as holding up...who knows what the history of the car is, but as was pointed out, if the car had been driven hard or tracked cylinder 8 could’ve gone fairly easily. But yes, it does show that the bearings can last...but bearings should still likely be changed every 50-60k miles. Probably much sooner if tracking the car regularly. What was more concerning to me is hearing that the car with only 30k miles had worse wear. Just goes to show that there is no rhyme or reason for how and why these bearings wear how they do and mileage on the car doesn’t count for much. The best you can do is try to buy a car with long term ownership and maintenance records which is pretty much the rule for any car. Then it’s still no guarantee and you better change the bearings ASAP.
@@ericm8368, these motors are notoriously know for failure due to worn bearings at a lot lower mileage. My comments were on the fact that this particular example "held up" a lot longer than most S65s. Bearing replacement on these motors are considered a maintenance item, crazy to think so I know, but unfortunately it is. 🤣
@@Rayzor1502 I got it😉
@Eric M - We believe that number of cold starts and how the car is driven whilst cold is the main contributing factor to the wear. The 30k car may have not been looked after, regularly driving hard from cold, lots of short journeys to not allow the car up to temp etc.
Unfortunately it’s impossible to know how a used car has been treated in that regards. If it was directly linked to mileage it would be more simple but as this car shows it is not.
Okokk
aston does a fantastic job of explaining things. amazing team you have put together! would love to own an e92 now
Really are a special car, will happily recommend them to anyone.
Anyone with a lift 😂
These guys did my Rod bearings on my e93 M3 last week and they did a great job. I can honestly say I trust Evolve more than I trust the BMW main dealers. These guys don't only know their stuff but they are really friendly towards their customers. Evolve are the only company I would trust with my beloved M car. FACTS!
Thanks for the kind words! We really do love these cars 🥰
@@EvolveAutomotive When I was at your workshop last week, I had to leave my car with you overnight. I was about to arrange an Uber so I could get to the nearest train station in order to get home when one of your staff told me to put my phone away as he would drop me to the station!!! I'm not going to lie, I was taken aback as your fella did not have to do that. It's these little touches what will keep me and other customers returning. So not only do you get a professional and trustworthy job carried out on your car, you also get great customer service. Keep up the good work Evolve. 👍
how much was the job if you don't mind me asking?
£1500 inc VAT
I thoroughly enjoyed watching this video.
Very informative and soothing to watch at the same time. Job well done to Aston and the guys at Evolve. Can't wait for Imran to do the test drive.
I have a 2013 m3 6mt and I am eagerly watching these videos. Mine has only 28,000 miles and I am the original owner. But I am fascinated by this car and can’t wait to see what you guys do with it!
Did you need to replace your rod bearings?
Thank you gentleman for sharing, might be a small audience for content like this but extremely appreciated, thankfully there's still some engineers and technicians out there
Well worth the wait for this one, just goes to show that if the car is well maintained and not ragged the bearings can last. When I get an E92 im bringing it to you.
Great idea for this build series. Well done to the owners of this car, it just shows mileage is just a number with proper maintenance 150k is better than 60k in some cases :)
Professionals at work!
I’m really keen on following this series, bought an e92 M3 couple months back aswell, already has the evolve stage 2!
Nice! What does the evolve stage 2 mean? In terms of power and added parts? 😃
I changed my 740 Schnitzer engine mounts a few months ago as I just like to change everything. My passenger side mount looked like yours, and exploded as it was removed! Changed the transmission mounts aswell.
Used Febi Bilstein ones, fitted a treat.
I hope this dude gets paid well, he deserves it.
Amazing first ever video I've watched from the channel and I must say that I won't stop watching vids from Evolve...however, the background tune sounds so much like 'The Game-soundtrack'.
Good that you guys maintained objectivity and demonstrated how a high mileage car that is maintained can have rod bearings that don't look bad. Motor mounts on any car with that kind of mileage will see that kind of wear.
Watching an expert work is always a joy.
These are well engineered cars. Thankfully people are recognizing that. 😊
A video about their engine bearings failing is an example of good engineering to you? Interesting bar for "well engineered."
@@hamsterbrigade We appreciate your feedback.
Know that you are loved and accepted. (:
Tell us more now?
I did mine at 90k miles with some fellow e90/2 m3 owners. I was a bit scared. The real work is the sub-frame. There was some copper showing on a few of the top bearings, but not much really. I am the original owner and now have 130k miles. I get an oil analysis at every change and the results have always been superb. It runs like new and I love it. I had to rebuild my diff and lsd recently (put in the 4:10 gearset) and all new bearings. That was much harder and less fun than doing the rod bearings.
Ok ok, I’m a little more relaxed now, my e93 has 60.000 miles on the clock and I always worry about this bearings, even tho I always warm up the engine and never rev it more than 3000 until fully warmed, Still in plan to change them soon but hard to find good trusty shops nearby. And great videos guys, I like this project and I’ll follow it closely, curious what you guys will do with it. Cheers
Just had this done the other day, fitted by Hash.
Keep up the fantastic work guys👌
Its like art watching these guys at work
Amazing vlog Imran, well done to the previous owner 👍 I was dreading this being the end of the project with the thumbnail, lol. Heard so much about the rod bearings on the E92. Finally able to see some content on it and see it in action, being done. Salute to Aston mans a ///Magician legend!
aston does a great job explaining it all, awesome video
I changed mine preemptively at around 75.000 miles and they were, in comparison, in a much, much better shape. The copper wasn't even exposed. I never rev the car cold and this proves, in my mind, that most engines failures is most likely a direct result of abuse from clueless owners.
As with any sport cars, if you don't treat them as such they will inevitable fail.
If it had the pre 2010 bearings that were copper then you did well. We rarely see an early car without at least a little copper showing.
@@EvolveAutomotive I guess most owner don't save their car for the next owner. I have no intention of selling my M3 (manufactured october 2007) so I take care of it 😁
Right, a very mabusive owner... No, but for real, I think it comes down to a few things. Oil quality, how often changed. The thickness of the oil, and the cold starts of the engine. When the engine is cold, the oil pressure is high! and this means that it is very hard on everything until it is warmed it. I always baby my N55 engine when it is cold. Always do the oil very often. Let them warm up for a long time. The rod bearings sit on a very thin layer of oil, and they are not designed to touch the crank. If the oil level is too high, or too low, they will. There are very small holes in the journals, and if the oil is too Thich, it will not do its job.
I think Aston could change the bearings in his sleep now, as usual a great insight into the workings of these cars, love your vids.
Wow, I had no idea rod bearings could be replaced w/o pulling the motor. Great video
So professional and well filmed video.. looking forward to more 👍🏻
Sounds like you guys have a proper car now.👍Well done! It’s definitely a sigh of relief to know all is well. Another S65 saved!🙌
Great project and vid. I love seeing these type of series and Aston is great at explaining what he is doing and making it simple to understand.
Nearly at 100k subs too. I'm sure that goal will met very shortly.
Keep up the great work.
terrific video i will keep. there is so much to remember but you have been excellent. KEEP UP THE GOOD WORK. THE BOTH OF YOU. regards.
Proof that maintenance is a must. Another great video
Got my guess right. Pleased to see it looking well looked after. Good base to see what comes next now.
Amazing series gents. Love it!!! I remember you mentioning on one of TR Hamza's videos that you were gonna do a high mileage project. I love being able to learn some mechanics like this!!
Love how the oil coming from the rear plug was nice and amber while the oil from the front plug was black. Seeing how the rear bolt was not stock while the front was, there’s a possible chance that previous servicer, probably former owner, wasn’t aware of the front plug.
My 2011 leaks right in front where oil pump is, another item I need to look at when I do my bearings.
Keep it coming lads, Quality & Aston is soo knowledgeable
Videos like this is why I subscribed I love E9X M3 content cheers 🤙🏼🙌🏼
Good strategy keep it up. We like to see this type of content and quality editing 👏
this is so cool to watch post more on this car!!!
Good job I'm local, so when I finally get one myself I know where to bring it. PureGT has been useful.
Well done guys. Great video. And well done to your master tekker.
i want an e92 m3 so bad, i think im going to pull the trigger next year, fingers crossed 🤞 then I'm coming straight to Evolve!
Great vid guys. Renews my interest in "swapping out" My E36 M3 for a low mileage E90 M3. 🙏
Enjoyed that video, great work gents.
Enjoyed a great and interesting lower end look.
Great video & very informative you guys know your stuff 👌
Haven't heard the workshop sounds integrated with the audio before either! Was pretty cool 😎
I can't get over how much rust there is under this car...it made me go out and check under my own 2010 E90 M3 Comp
Good channel this, always learning. Wish you success in the future.
2:49 "Ok, that looks good. Let's put it back in."
Great work, loving the content. Keep up the good work 👏👍
Great content guys. Very intuitive and keep it coming. Project N54 would be great 👍
This video gives me the courage to buy an m3, change the road bearings and live a happy car enthusiast life afterwards :)
Superb video guys just brilliantly informative.
Great video guys.
I started a similar project about 2yrs ago. Bought an 09 on 123k on original bearings. Changed them straight away and looked reasonable, small amount of copper showing but nothing worrying.
Interested to see where you go with this. Hopefully will show that a leggy e9x is nothing to be worried about.
Whoever gets mates rates from Ashton is lucky 🧺 great video as usual hope to see the next one soon
I’m at 156K on original bearings in my 2012 E92 M3. Now that I’m on stage 2 setup and tune, I’m eagerly watching this one 👀💪🏽💯
This man living life on the edge
Risk taker...
Playing with fire! lol
When you were born you drove your parents back from the hospital
I’m at 95k on my e93 M3 and I plan on changing the bearings myself but every time I drive her I let her warm up for about 15 mins just changed the oil too and she runs great!
Like the content on this, really useful if in the market for a m3. Looking forward to the build. 👍
Great vid guys, really enjoyed & I haven’t even got an M3, I have got a BM tho.
Enjoyable video! Keep them coming.
Damn man i’m at 98k miles can’t wait to get these done one less worry in my mind. I honestly rather worry abt the trans taking a sh** then the rod bearings breaking lmao
DCT failure is incredibly rare on these. Even at 152k we aren't worried about the DCT gearbox in this car.
@@EvolveAutomotive Well good to know that was a worry of mine is there anything else I should worry about besides rod bearings and the dct? Like expensive stuff yk
Throttle Actuators are the other main thing, we have a video on that here - th-cam.com/video/38XiDMIoH5I/w-d-xo.html
@@EvolveAutomotive Thanks man
YES!!!! More like this please 🙌🏻🙌🏻
Nice vid,no bollocks,just to the point!
Quality workmanship 💪🏻
I love this stuf of vidoes what a lovely work , lucky guys :)
Hey guys I really enjoy watching all the things that you do with all the cars. As I have a E90 M3 and have done the rod bearing as you guys have and wanting to purchase some of the products offered and programs but, I am having concerns of the main bearing and what I am learning about the S65 vs the S85 - what are some of your guys thoughts?
Great work 👌 fair play with that milage on it its pretty good 👍
Awesome vid! I own 2008 M3, bought back in 2011 with 43k miles and 10 years later ….149k miles :)
He really knows hes stuff.
Cant wait to see more progress🤙
Enjoyed this 👌🏽 This M3 couldn’t have gone to a better team! She’s going to be pampered 🌟
Just digging into this series and think I'm really gonna like it.
As a sidenote it's absolutely ridiculous that a ccompany the size of the Milwaukee haven't stress tested their M12 platform with the likes of their impacts for drop testing and 1000's of insert/removals of the battery and wearing of the tabs. I've seen the cable tieing of the battery quite often...
Thumbs up I prefer these projects as they feel a bit more realistic to the average viewer in the UK as opposed to brand new 50k + cars upgrading their performance.
Professional and informative
This is an excellent video. Thank you
Incredible content!
Nice video and very nice music🙂
Loving watching these Eps, plan to keep my 50k 2012 92 for as long as I can, so preventative mods and potential failure parts that you guys might make to future proof them I'm very keen to see what this development car is it is will bring us 9X owners! Keep it coming!
Great video, can't wait for the next update 👍
This car looks like it’s been looked after or had easy miles
Be interesting to see a video of a repair done to bearing failure
That’s a full engine rebuild.
Great vid keep up the content
I'm glad you guys are keeping up the e9x m3 platform contents.
What bearing/bolts did you guys replace with?
We use all OEM parts
Really interesting that.. I am currently looking at E63 M6s with S85 V10 and know that rod bearings are the main lookout for these cars.. 👍🏼
Love the video Imran
18:27 Any idea what that noise is?? Mine has the exact same. Comes and goes on cold start.
Interesting video, and the shells were relatively good for 152k! (although some were still shot of course). I don't understand why you put new OEM bearings in it though, you'll still might well end up with too tight clearances.🤨
Because as this video shows, the OEM parts are perfectly up to the job as long as the car is correctly looked after.
We recently had a 1 owner from new 223k mile E92 M3 in and they were on original rod bearings having always correctly warmed the car up before proper use.
@@EvolveAutomotive A? No it doesn't, no 8 upper shell is showing a load of copper, this should not happen until far higher mileage. Even for a high revving motor, the whole problem with the bearings on these is the high chance of insufficient clearance. The new OEM bearings don't fix this.
That said, the tin/alu bearings do seem to fair better, and seeing as it's done 152k on the originals, the clearances probably aren't too bad on it.
great video ! I recently replaced my e92 m3 radiator,condensor and fan. When i started filling up my coolant noticed it leaked all the coolant from a hole thats on the drivers side of the radiator, i dont recall removing anything from there from the old radiator and by looking at your video at minute 5:50 right on top of the rusted line you can see that yours doesnt have anything connected to that hole either. Not talking about the blue drain plug. Can someone explain to me how i keep coolant from leaking from that hole.
Do you check bearing clearances when replacing stock bearings? I'm sure you guys have done enough of these to know if it's necessary.
I have a manual 2004 e46 m3 and has 128k on the clock, owned the car many years now since 100k and this is always on my mind to do.
Amazing video!
For someone looking to get an E92 M3 and also someone who likes watching a well made maintenance video. This was absolutely 💯
Amazing video please keep these coming!! Liked and subbed :)
The song in the background at 3:20. Cant remember the name, ive been hearing that EVERYWHERE i go lately.
Sounds like ‘I love you baby’ by Frank Sinatra, or a variant of it.
The rod bearings on my e92 give up at 72k and only had the car a few weeks lucky for me I bought it from a dealer so got my money back but after saving up for a while it was disheartening after wanting one for so long
Did you buy extended warranty or was it covered by their standard warranty??
@@esthedik92most likely extended considering these cars r over a decade old
When S65 asks to do a “Fancy Pour” on their drink.
No funnel baby
One of the best atmosphere BMW’s car
What a stud fillin the oil w/o a funnel. Dem skills yo! Fun vid, thanks!
Do you lubricate the new bearings before first startup or does the sump oil do this anyway? Thanks and great vid.
Yes each bearing is soaked in oil before being put in, as a protection before oil pressure builds after first start up.
Quality as always. 💪👏🏆
Love me some E9X content. Great bonus clip at the end, lol. Any idea of what legitimately causes the start-up "clack"?
I bet more than a few E9X M3s experienced spun bearings and wrote the engine off from the BMW free maintenance program they came with that also included oil changes at 25'000km intervals! Yes they nearly take 9L of oil but such an extended interval was purely to save money on BMW's part. Most Blackstone oil analysis shows the oil being good for about 10'000km which is plenty for a sports car, which means if anyone followed the recommended and included services and intervals, they would be running their high strung engine on oil that is up to two and a half times past its laboratory verified usual lifespan.
We recommend 10k miles for oil changes and spark plugs. BMWs service intervals are way too far apart.