Your truck sounds AWESOME. Did u do any work to the heads, valvesprings or lifters? Or is it all stock with just the cam, pulleys and tune....Thanks in advance. I'm picking up a 5.3L REAL SOON...
I love the cam! I’m doing mine now, 227/234. Did you do your hd front end swap with the ‘11 hood and grille?! I want to do the same to mine minus the bumper
Alex Lopez you should do a low lift cam tsp stage 2 cam or a stage 2 BTR cam. I say stage 2 only cause that’s about as big of a cam you can go before a stall converter is required. And with low lift cams below .600 lift you can run the ls6 blue valve springs for a cheap cam build. If your gonna do a stall match it to the rpm range of the cam and go bigger. My stage 2 high lift needs a stall. Making me regret buying a smaller cam in the first place
Its a regular magnaflow muffler i paid $100 for the muffler itself its round and measures 18" long 3" in and 3" out and the pipe its a stainless steel pipe 4" and a 6" tip i paid a total of $245 for the muffler and pipe installed
ivanynana l just called them. And of course they didn't have ANY information available for your setup. Because, as the guy who answered the phone says, " We do allot of trucks". Says he doesn't remember....WOW
sounds pissed off ....... i like it !!!!!!!!!!!!
Cam was installed at KHP performance shop and exhaust was install at a regular muffler shop in rio grande city (GS muffler)
how much did the cam and install cost you in total?
Man my neighbors would hate me... side note I stay across from the church!🤦🏾♂️🤷🏾♂️😂😂
They know about forgiveness.
ta hermosa tu truck carnal y ahuevo tune by tellez 👍👌
Exhaust is 3" and pipe is 4" with 6" tip
Custom grind but can you give a full spec on it? I love the way it sounds!
Uriel gonzalez el levelin kit es un 2"
And the muffler is a magnaflow 18" round one
that sounds nasty man. good build!
Clean ass truck bruh. Props. Need to get some video up of my cammed 6.2 Post some more vids of this beast..
Your truck sounds AWESOME. Did u do any work to the heads, valvesprings or lifters? Or is it all stock with just the cam, pulleys and tune....Thanks in advance. I'm picking up a 5.3L REAL SOON...
Guessing he did not know lol. I wanted to know also.
Got the same truck goals asf ATM
Has it not been for the title and the exhaust clip I woulda mistaken this for a duramax lol
Where was cam install and exhaust done?? Sounds badass!!!
Sounds mean as fuck
No cats? I had my truck done by khp also a few weeks ago. Kooks headers with catted y-pipe, cam, k&n, msd wires, and tune.
Sounds bad ass
Comp cam 228/234 588.598.110 lsa custom grinde cam bought it at KHP performance shop you can find them on facebook
Damn nice truck. sounds good. Fuck all the haters. There's always gonna be haters
Sounds awesome. What kind of stall converter ?
Nice truck bro
I love the cam! I’m doing mine now, 227/234. Did you do your hd front end swap with the ‘11 hood and grille?! I want to do the same to mine minus the bumper
Nicr chop, did you lose any brake vaccuum?
That start up
Roars like a fucking lion
Sweet truck and it sounds mean !! Great taste
Puta troconona viejon. Tengo una 2017 5.3 and i also wanna cam that Bitch so it can sound almost as sexy as this . Clean truck vato.
Cesar Valdivia grasias yo tengo una 2015 6.2 la boi aser tune aver como jala
Omg❤️🤤
No sabria desirte donde mero en houston pero ve a cualkier muffler shop i checa si tienen el magnaflow redondo 3"in 3"out 18" long
Very nice
Fucking beautiful
What's all done to your truck.?
Sounds great.
Did that rear HD bumper plastic cover fit right in? Or did you have to buy a whole new rear HD bumper?
Do you have a part number for this? Sounds excellent. For the cam I'm talking about
Yes it is a 2500hd hood and grille
Nice.
sounds sikkk..what exhaust r u running?
Calm very mild lope... nice though.. on a 114?
What muffler is that? Sounds mean!!! Puro 956!!!
What's the torque curve like with this cam? Did you lose a lot of bottom end?
do you have any dyno numbers , how was the drivability?
Sounds really mean bro.
What would be a good cam for my 05 avalanche 5.3 with out breaking the bank if possible not messing with the springs nd valves
Alex Lopez you should do a low lift cam tsp stage 2 cam or a stage 2 BTR cam. I say stage 2 only cause that’s about as big of a cam you can go before a stall converter is required. And with low lift cams below
.600 lift you can run the ls6 blue valve springs for a cheap cam build. If your gonna do a stall match it to the rpm range of the cam and go bigger. My stage 2 high lift needs a stall. Making me regret buying a smaller cam in the first place
i know when you do things like this to your truck mpg dont usually matter but qhat kind of mpg do you get on average? And ever run it at the track?
What's your set up for cam to exhaust, love that!
Ok, I liked the tip. Was there a brand on the tip?
Daniel Clanton that’s what she said
what size push rods did you go with on this cam? 7.400??
Its to loud but funny i like to make a burnout every corner jaja
Is the 228/234 cam rough on the engine?
Christmas Gummyworm was wondering the same thing
k leveling kit trais bro like it
any videos to see how she pulls.
How bad did it effect your mpg?
what cam is it and did u put lifters too
did you keep the stock converter?
Is that a 2500 hd hood? Bc it doesn't look like a 1500 hood
What brand/size stall converter are you running?
barbacoa los domingos?
what all was done to this truck
Sooooo it's got a high lift cam? That's all?
Have you towed with this set up ?
hey what's the part # on the cam you got in there?
Do u have a part number for this cam
hows the mileage on your truck now want to do something similar but not if it affects my gas mileage
dont worry bout that cuddie
where can i buy the magnaflow exhaust in houston
What gears are you running?
What exhaust system is that
How much did all this cost ?
lobe separation angle?
What is the cat back exhaust on this truck?
Herps85 pasecetter headers straight 3" pipe with a magnaflow 3" in 3" out and 4" pipe with 6" tip, bought everything on a muffler shop
ivanynana how much in total
Headers with dual carven 5 inch tips
what kind of exaust ur running and size
What exhaust step up is that
6 speed auto or manual?
is the exhaust 3" or 4"?
What exhaust kit is that?
Dod delete?
What the cam specs ?
wat exhaust you got on it bro
Do they ship? I'm from pa.
what size of tire is bro??
Whats your exhaust setup?
Stock tires 275/55/20
whats the name of that exhaust??
What tip is that ?
Is the muffler a 4 or 5in round muffler?
Spencer Rodimel 3” in 3” out round magnaflow muffler 18” long
Can they ship?
What lift numbers
What motor
Is that a 4 inch tailpipe bro
Tx956carlos 3" piping before muffler and 4" piping to the 6" tip
What's the specs on this cam
what exhaust is it that ur running ??
Its a regular magnaflow muffler i paid $100 for the muffler itself its round and measures 18" long 3" in and 3" out and the pipe its a stainless steel pipe 4" and a 6" tip i paid a total of $245 for the muffler and pipe installed
Magnaflow 18" long round one not oval
ivanynana is it a 4 or 5in round muffler?
You know the model number
How comfortable were you using this truck as a daily driver? Would it be reliable?
If it's built right, yes.
do u have the off road y pipe or it has double mufflers from headers
Billy Hernandez offraod y pipe and one muffler magnaflow 3"in 3"out
ivanynana what brand is the y pipe
CNIT 956 pacesetter
Is that a good cam for a 5.3 or is it too big?
amairani ontiveros
I think is to big
That cam is to big for a daily in a 5.3L, you need a high stall for sure, and you are losing a lot of bottom end torque.
Yes dod delete
Stock 342s
What muffler or exhaust you running brotha? I'm about to cam mine ha
Moto596 magnaflow
Yank ss series 3200
que cam recomiendas para una 2012 sierra denali 6.2
vidal Murillo uno igual ke el ke trai esta troka le kedaria especial pal 6.2 i va sonar mamalon
ivanynana que cam traes en esta y el exhaust
vidal Murillo 228-234 custom grinde cam nome acuerdo los specs la troka la vendi ase 2 años
vidal Murillo el exhaust traigo pasecetter headers kon y pipe paipa derecha kon un magnaflow de 3" pulgadas entrada i salida
orale es que ando con eso de ponerle un cam asi que se oiga chingon y no sabia de que tamano .pero este se oye bien grasias por contestarme compa
You can calk them and find out (956) 562-8010
ivanynana l just called them. And of course they didn't have ANY information available for your setup. Because, as the guy who answered the phone says, " We do allot of trucks". Says he doesn't remember....WOW
The cam is 228/234 they charge me $1700 cam with DOD delete with springs and pushrods
Lololololololololololololol why??????
k leveling kit trais bro like it