Anet ET4 - 3D Printer - Unbox & Setup
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2019
- Amazon Links
Buy it here: geni.us/BuXBLDS
Official Site: bit.ly/2pawazg
Recommended: geni.us/JustVlads
The Anet ET4 is all-metal FDM 3D printer that made of industrial grade 32bit motherboard and comes mostly assembled. It supports auto-leveling, resume printing and filament detection and comes with a more stable and compact construction design. ET4 is the professional 3D printing solution that you can afford.
Ultra Silent with TMC2208 Stepper Driver
Got TMC 2208 stepper driver version (up to 256 real micro-steps) with extra USD $15.
Automatic Bed Leveling
Auto-leveling frees you from time-consuming and labor-intensive leveling tasks.
Power Outage Recovery
Resume printing and recover from exactly where it left off. No worries about unexpected power outages.
Filament Detection
Filament detection that detects the filament end and sent reminder to avoid air-printing.
Automatic Filament Assignment
Automatic load and unload the filament with just a click.
Assembled In No Time
With modular designed units, you will be able to quick assemble your ET4 on your first try in 10min.
Integrated Modular Design
Integrated, modular design with terminal pinboard for connection ports, covered wires and a more sleek appearance.
Designed With Safety In Mind
Designed with safety in mind. The embedded thermistor and heater on the extruder are specially fixed.
2.8-inch Touch Screen
2.8-inch LCD full-color touch screen for easy operation.
Well-Made All-Metal Frame
ET4 is built to last with high strength aluminum frame. Enclosed metal unibody design enables a more stable and rigid structure with compact size.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads.com/ - วิทยาศาสตร์และเทคโนโลยี
New Channel: www.youtube.com/@Just_Print
Buy it here: geni.us/BuXBLDS
Recommended: geni.us/JustVlads
Can you make a noise comparison of et4 and ender 3?... a db vs time chart would be nice... as nobody has done it yet, I hope you would be the first to post a video on this.
35:10 So where can i find these prints you mentioned at the end? I dont see them in the description. Thx!
Just Vlad .... Hi, love the video, very detailed and helpful. Could you please share your Cura/other software settings . I’m kinda new to this and your prints look amazing, i wanted to know what settings you are using
Can you tell the size of the machine. The whole thing assembeld. I did find some sizes, but i am afraid those are just the base
Hi, I'm new at 3d printing, I bought an ANET ET4 a month ago, and I've been getting better at the configuration of the profile and all of that, but I still can't get a perfect finish, I always get a line between the layers, the layers don't bond very well with each other, so I would really appreciate if you can share the profile that you use for printing, you got such a beautiful results...
And also give me some tips at 3d Printing!, Thanks
Do a comparison with the creality ender 3 pro
yes
I got one of these because of how much you mentioned it being silent. I don't know if your definition of silent is different than mine but the version I received had silent fans and steppers that sounded like an angry dial-up modem that just got a huge megaphone to scream through. Did you do any additional setup to the printer?
Nice edit after the fumbling of the benchy.
I am impressed with your videos, they have a lot of quality and interesting and important points! I already purchased the Anet printer, I am looking forward to having it. I hope to be able to create objects for my emp
Thanks Vlad didn't find the manual much use, said what went where but not actually how to fit it there so thank god for youtube and your channel
Nice Anet is back!
Very detailed and great review, thank you!
I have 2 Ender 3 Pros and I haven't been able to purchase any since the great virus attack of 2020, every Ender3P on the continent of North America has been sold. During my daily printer search through Amazon and the somewhat shadier Ebay I came across the Anet ET4 in Amazon. Hadn't heard of them before. It's priced at $249, exactly the same as the Ender3P. The specs looked good and the 3 reviews favorable, but this video convinced me to pull the trigger. Really liked your review, very solid, no fluff. New Subscriber. Definitely void the warranty and look inside. To quote one of my favorite YT bloggers, "Don't turn it on, take it apart"
how your reviews after all about et4?
bought after seeing your review and others. I was looking for a secondary drive to work in pair with my 1st gen Ender 3. Damn that day!
This printer is such a pain to make it work that assembling an Ender 3 seems pretty easy in comparison. In order we have:
- the Z-axis home switch put on top of the printer and EVERY TIME you start printing she needs to go up and then down to the bed
- THE BED!!!! oh god, leveling is a nightmare! you first need to scroll down the z axis MANUALLY, then use your wonderful auto-leveling sensor to literally screw up everything. you will get 50% bad adhesion and 50% an engraving on your glass bed... AND OBVIOUSLY your fantastic leveling will be forgot EACH TIME you shut down the printer. great feature!
- the y belt too loose, it makes an absurd noise when changing direction.
- the x belt too large for the rail of the tensioner, so it will make a "clicky" noise while moving.
now. maybe i was unlucky, difficult to say, but when I will get my return and refund I will unpick Anet from my list forever.
Thank you for this. I was considering it, and the weird auto leveling sensor put me off and I ended up here.
ok, 1. calm down 2. you probably did get a bad version. my auto levelling is remembered everytime, everything is silent, no noise, no clicking nothing. and the fact that the home is all the way up there, iam fine with that. it is a great printer, but the manufacturing line of it is quite inconsistent.
Did you tighten anything with the belts?
Hi,
Thank you for sharing.
What software did you use?
I what to use the Simplify3D, but I can't find the profile for this printer in there.
Just a question please.
I bought this printer per your Recommendation. The Hot end doesn't heat up at all! If I touch it and leave my hand on it the temp indicator rises. After I take it off the indicator drops. so the sensor is working but not the thermister.
Do you know where I can get the original firmware to re-flash? Just in case the firmware is corrupt.
Any help is appreciated.
Thanks
Had u printed tpu with this machine? I want to finl a good setting of printing tpu of this machine.
Could you share your slice configuration?
Thanks so much for this great vidéo. You helped me get my first print !
Although I'm still quite curious about the noise level of your printer. Mine seems to do much more. Could the drivers be different and that would have an impact on the noise level ?
@@amaurydame Yes
Do you have to apply a 3Dlac to the print bed? Or being made of glass is it not necessary?
So how well does it stack up against the Ender 3 and which one would you recommend?
Looks like I got the short end of the stick with mine. It's loud and won't even calibrate at this point. The print quality is great and the glass bed adds a beautiful finish though. Looks like I gotta take it apart and put it together again lol
Did you just use a standard Ender 3 profile? Also, is the bed 220 exactly or 235 like the ender 3?
If you're going to review the printer you should review everything including the auto leveling that's a big selling point for them so if you don't give us an opportunity to see exactly how it works if it works then it's not a complete review in my opinion usually do an okay job
Hi nice vide, did you use Cura to create the gcodes ? can you share the anet et4 profile and what type of filament do you use PLA or PETG ? can you share the printing files too. I have this printer buy I have some issues with my models created on Cura. Thanks
Can you tell me what slicer and what setting you used, I am new to printing and that is the same printer I got
Hi, what slicer did you use to print xyz cube and benchy?
Question what is the settings for printing a flexible filament? What is the standard temperature. Thank you.
thank you for this
On what temp, speed and retraction are you printing??
very cool 3d printer
Hello , my 3d print came written 220 v only , can i plug on 110 , IS bivolt or only 220?
I can't tell the difference between the Anet ET 4, ET 4 X, ET X-R... I know the ET 4 Pro has a Meanwell power supply etc.
What is a good reference point for deciding which Anet 4 model to buy? The Anet website doesn't really differentiate.
Yay it came today my Alien Anet.
I put it together and now I'm printing out my doggy :-)
When i tell it to go to one of the four corners for leveling, it just goes slightly right of the middle no matter what corner i press!!!
Just recieved mine. ordered from France and recieved from the Czech Republic … not logic I know.
It’s my first 3D printer (probably not the last one) and I was pretty surprised by the simplicity of the assembly of it. Nevertheless I had some minor troubles especially due to the lach of information in the manual. Fortunatly I had seen this video clip earlier and wathched it again while building the printer. It didn’t save my life but at least saved me a few “f”-words :-)
That bed cable needs a strain relief, those wires don't look like they will last long since the most flexible part is right at the edge of the bed
I must say the most descriptive video over the internet . love to buy the same if I have extra money.and your lovely voice.
Can you share your print settings for this Anet ET4 please ? I got some troubles with mine
I need help I can't calibrate my bed correctly I have try like 7 times by now. Every time I print at some time the print takes off from the bed
Hi, May I ask how long it take for each pieces? Thanks,
Amazing👍
Better than Ender 3 and alfawise u30?
When I press home on mine it goes to the left of the printing platform and goes all the way down and it makes a grinding noise
hi, have you compare to ender3 stock?
When checking the wheels there not supposed to freely move, there meant to grip the frame slightly, otherwise the drive motors will struggle to grip the frame and will "wheel spin" and not move properly.
a tip for those who are complaining about the printer having issues:
deal with it.
JK
when you order from china, your printer will always come with some problem. sometime mild, other times severe. but it will ALWAYS come with a problem. the reason is the inconsistent manufacturing line.
there is a really simple solution to this. just buy the original! how? order it from the czech reublic. czech reublic manufactures the original anet printers, i ordered mine from czech reublic and it is holding on for a year with NO problems.
EDIT: iam not saying that it will 100% come with no problems, im just saying that it will come with no problems 80% of the time, and when it does come with a problem, it is not that severe. not at all.
I have anet E12 and I am struggling so much with it, no power resume, no bed leveling, no filament check and so much loud makes liek waste of money. This looks better.
Great vid thanks. Is this better than the Tronxy XY2 Pro you reviewed last month? Which would you recommend?
Yes the Xy2 pro is hunk of junk
What slicer? What setting? What retraction? Mine prints with lots zits at 2 Wall 4 Wall prints ok. Thanks. I am using esun pla+
Would you say its better then the Mega S?
Would it print nylon do you think? Or would you like to test?
Merhaba, Tam otomatik kalibrasyonu neden kullanmadınız? Kağıt ile manuel kalibrasyon gerekli mi?
Really useful, thanks
Just vlad- can you help me out with this printer problem?
3IDEA Anet ET4 3D Printer vs 3IDEA Easythreed Dora 3D Printer, which is better ?
Hi Guys, planning to buy a 3D printer here. This and the Creality Ender 3 are in the same price in my country. Which one would be best for me?
Infill speed & layer height & timing
You made the screw?
I use this printer on the latest version of cura using the creality cr-10s pro and resized the bed in the settings and it works a lot better than what they recommend.
Little Green, so all I need to do is just use the CR-10 pro and it is compatible with this one also?
@@theavengerbros3770 yes that's the one that works great for me I'm using that printer profile to make a 4 day print right now
Hello Vlad,
Great evaluation ! Thanks a lot !
Help me to decide to buy this ANET ET4 printer instead a TEVO Tarantula PRO (Sold-out in the shop).
Regards !
Good thing you did this. i've choosen the TTP and i'm selling it right now because it caused sooooo much headache to set it up and keep printing.Came completelly disassembled, Manually leveling it after EVERY SINGLE PRINT and having issues with Thermal Runaway Protection nearly all the time.
Hi, what slicer do you use? could you share the Printer Profile with us ? Thanks
Man you messing with my mind for a second on the time elapsed segment! I was trying to figure out why the stack of printer filament was moving as the carriage moved back and forth, then it occurred to me that the camera was mounted on the build plate! LOL
Hello, can anyone please share thier cura settings for this printer. Ive been messing around with it, but wanted to see if anyone had a luck with finding the perfect settings for this printer
I am gettimg lots zits. If I chage infill to line and wall to 4 Prints really nice but lots of time.
Bonjour 🤝
Excellent travail bravo 👏 et merci pour les explications bien claires 👍👌😁
i dont speak bagguette
What is everyone doing about the Z Axis screw wobble. Anything made yet for it
Is it the same as labist version?
For those who want to comparing this to Ender3, you have to choose Anet ET4. because its 32bit motherboard, metal extruder, auto feed filament, glass bed, cheaper price, easy to build, clean model,lcd touch screen, silent motor, the printer body stucture and print result similiar to ender3. i dont understand why in 2020 you want to buy ender3? this product released with all feature that ender3 have, even more because ender3 dont have metal extruder, glass bed, etc. yes you can modify ender3.. but why wasting time n money when you can get anet ET4 for cheaper price.
My thought exactly.
What laptop are you using?
How to force this printer to work with CURA ? I was trying everything gcodes not working ;/ Please help anyone...
nice printer, compared to the a8 it's awesome. Quick question if anyone else has had this problem, I can print any of the included files but as soon as I try to download one and print it starts and then stops with completed printing without printing anything. .. am I missing something?
Hi Caziques, I am having the same problem, have you fix it?
@@godlikebr7727 i did... Replaced the sd card... Fixed!!!
Warranty void if removed sticker.
User replaceable fuse inside.
Fail.
Great video! I just bought a ET4. What slicing software are you using and what settings are you using for the ET4? Thanks!
Did you ever figure out the software
@@julianhernandez8437 I just entered everything manually into Cura. What slicing software do you use?
@@CrazyFastFlying I just updated Cura to 4.5 and when I looked at the Anet section it had an option for the et4
@@julianhernandez8437 Ok, great! I have 4.2 right now so I will have to upgrade. Version 4.2 doesn't have the ET4
@@CrazyFastFlying yeah neither does 4.3 and 4.4
I just purchased my anet et4 but, it seams I can only print from my usb link. I've tried the factory flies from the sd card (dog) and it printed fine but I designed some files on tinkercad and loaded to rep. host and printer sees file but no gcode it seams. switch to cura newest and old version no luck loaded dog into rep. host and cura (new and old) but slicer cant see it either. I checked files type but both mine and the factory dog is tooled gcode file.. whats wrong here?
reply I figured it out so everyone can rest at ease that my sd card issue is fixed.. I know you was worried! lol
for one, your sd card does not come formatted you need to create a separate folder and save the factory contents to your computer or just buy another sd card, format it.
2,) it seams to be a common mistake but if the printer doesn't recognize any files on the card its because the card wont read after power has been supplied sd card must be inserted prior to turning on.
3) some have also stated that there is a glitch in the sd card reader on et4 printer something about a 6$ amazon part. There is plent of info on this on the facebook, reddit, etc.
over all these are great out the box printers. I have a tevo black widow that I've owned for two years and from day one it was nothing but a headache. from poor quality info, assembly and parts. which I would not recommend to anyone that's a beginner this et4 I most defiantly would.
RIP Benchy 31:58
xD
Can it print petg?
I would remove that white connector from the hotbed because those connectors tend to fail quite easily
Is the glass build surface flat or textured?
It's flat
How to do it to print the parts, buy 1 and I can not use cure, simplify. Can you help me, I'm new, when I print it, I get a print on the screen.
facebook.com/groups/anet3dprintersupport
@Just Vlad , I have been watching your videos for awhile and I like your detailed reviews. I am thinking about getting this 3D printer for some family members, since they are not really familiar with the 3D printers. I have 3 3D printers so far, and you can see at least 2 of them on my channel on the playlist "3D Printer Videos".
Anet so easy for me
Silent motors eh? Must have sent you their best review model.
Which is best company
Just figured out why they home Z to the top...it's to remove the chance of bottoming out on the glass bed.
Hey i just received my tronxy xy 2 pro and my prints come out really quite good but the side surfaces are really wavy. Do you know what might cause this and how i might fix it?
Like a wavy texture or are they noticeably wobbly?
Print slower, if that helps, reduce the accelerations and try to increase the speed again
Can you print drone project
I'm having trouble slicing my models in Cura they will not print on my machine it always says print finished?
Go into your machine setting for the printer and set the code from marlin to repetier
@@ulisesarroyo9813 Thank you it work. Perfect. I'm so happy. Yay.
@@McChessNerd that's awesome man. Happy to help
@@ulisesarroyo9813 Just got my ET4 today and the three files on the SD card were Fan duct, Filament detector mount and Filament detector cap (so different from the ones in the video) but I have the same problem with these - it always says print finished when nothing has happened, do you know how to fix this?
@@marleygooch5789 I'm sorry but I don't know what would be causing that. I recommend slicing a file on cura and try printing that out. Sometimes preloaded files are corrupted
look like nice 3d printer. what my next printer Ender 3 vs anet et4? current printer anet a6 :D
I can tell you that the ender 3 is a very good printer easy to assemble (toulk under 2 hours) prints perfect every time and plus has a good fan base behind it so if something does go wrong you should be able to fix no problem i would defiantly recommend it
Take the Ender 3 if you want to use a printing Server. Anet did change the Firmware A LOT! so basics Gcodes like G29 and M503 are not existing. M600 also is missing.
Consider Prusa Mini
psu is only 110v? can it be adjustedd to 220v?
Yes, there is a switch on the power supply which is inside the enclosure.
Is there any flexible filaments useable with this printer? I'd love something to do super flexible(silicon feel) type prints but I assume that's not quite possible? Tks.
Yes, can use flexible,TPU
Hello,
It's possible to have the pig gcode
STL for that air spinner?
www.thingiverse.com/thing:2823006
@@JustVlads thanks Vlad. Already printed three of them everybody seems to want one...
Hey if anyone's watching this Amazon has a coupon for $100 off attached to this when you go to buy it on the app so it's something like $170 crazy good deal they only have a few left. I'm thinking about buying another one
Just got one for 170. 4 weeks ago I bought an Anet A8 and decided I needed another one but wanted metal frame.
I buy the anet et4
The 3d Models come with the SD card are printing great but the 3d model which I creat and put to sd card are not printing . I also try to print with laptop using cura some timed it work and now it is also not working I try many gcode like makerbot , marlin etc . Nothing works .
Plz help me with this
Can any one guide me
Hi Gaurav, try to format the sd card. It should be just the GCode or SD CARD problem.
i have the same problem do you fix it?
Hello Gaurav, have you solved your problem??
I can not print too
Use your own sd card. Sd card what included do it same problems to me. The same after formated. With another sd cards i have notproblems.
I wanted to see it autolevel.....
Just found this thing on walmart.com while looking for a nice hot end for the price of a hotend so i cake to see if it's any good. It's only 150 dollars. I don't need I just got a Prusa and a used lulzbot so this is the last thing i need but for 150 and how god it is i might just have to get it instead of a hot end.
❤
Very good and professional reviews!
I have same printer but my gcode is not working any help?
i have the same ploblem do you fix it?
@@BrunoSouza-bz2pk Hello Bruno have you fixed your Anet et4? I can not print
This printer 24v. or 12volts ???
24v
Hi
Does this use metal filaments?
i bought the printer and not gonna lie it is a realy good printer and i only payed 160 euro for it
after years how your reviews about et4?
@@terdengarwe6957 I would say it's worth the money but if you're looking for a printer you will upgrade a lot buy the ender 3 I swapped the motherboard of my et4 cous it's not a silent version