Anet ET4 Pro - 3D Printer - Unbox & Setup
ฝัง
- เผยแพร่เมื่อ 19 พ.ย. 2020
- Amazon Links
Buy it here: geni.us/olO13XT
Recommended: geni.us/JustVlads
Anet ET4 pro 3D Printer, DIY 3D Printer with a silent Motherboard & UL Certified MeanWell Power Supply, High Precision Resume Printing, Easy & Fast Assembly, 220X220X250mm
Self-developed Silent Motherboard
ET4 Pro built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.The work decibel is below 60 decibels, won't affect your work and sleep. It is suitable for library, home, office, etc.
Safety Protected Power Supply
ET4 Pro comes with a UL Certified MeanWell power supply, meeting all the needs of fast heating and long-time printing, protecting your printer from unexpected power surges, hot bed only needs 5 minute to reach 110℃. Moreover, the MeanWell power supply is concealed in the machine, making it much safer.
Easy & Fast Assembly
Super easy to setup since it comes almost entirely preassembled, it consists three main parts and can be assembled in just a few steps. Do-it-yourself parts and accessories so that you can enjoy assembly and the beginner can easily finish them.
More Advanced Extruder Technology
Resume print function：It can resume printing from the last recorded extruder position after suffering unexpected power outages or lapse occurs, saving time and reducing waste. Matrix Automatic Leveling: 25 points data collection, auto continuously self-calibrates. Frees you from Leveling Troubles. 2.8-inch Sensitive touchscreen: clear UI with friendly interface, easy to select file printing and preview the printing status real-time
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads.com/ - วิทยาศาสตร์และเทคโนโลยี
New Channel: www.youtube.com/@Just_Print
Buy it here: geni.us/olO13XT
Recommended: geni.us/JustVlads
Just got my printer tonight will setup as u showed tomorrow. Thanks
Best tutorial in youtube for this printer
Thanks, I just purchased this because of your reviews.
May i know, about your satisfaction with that printer, as i am a beginner and i would like to buy this
Very useful overview. Which PLA brands did you used? Which SW did you use to prepare the models? Thank you
God bless and have a good day!!
Bonjour 🤝
Excellent travail bravo 👏 et merci pour cette vidéo bien expliquée 👌
Juste une petite précision, on peut imprimer du filament flexible avec ? Merci 😉
The layering can happen if the spool is turned. The spool cannot rotate evenly because the axle does not slide on bearings. I had the same issue on my Anet A8 and fixed it with an new spoolholder :)
Nice video bro 😻👍
Hi! sorry I have a question? about the printer 3D anet E4, I just bought one and assembled it but it cant go home level especially Z axis and I watched your video I noticed the level sensor doesnt light when it closes the glass bed? I wonder if the sensor is damaged bcz I tried to adjust it but it does not react. thanks in advane.
Enjoyed this and a very good review, and you have a new sub. Stumbled across your site as I was looking at so many 3D printer reviews and I possibly have it down to two. Yet so much jargon and understanding on what makes a decent printer in 2021.
My question for you sir, between the upgraded Biqu B1 which uses a steel printer base, and this Anet 4 Pro with glass. They both cost around the same in price, either Banggood or Amazon.ca. Therefore, which would you recommend for a first time beginner and TIA?
Really enjoyed your video. I would like to add a few things that I found using this printer. First and foremost, place it on a solid surface! not a rickety coffee table. Second, those glass surface clips, turn them upside down so there's nothing to catch the nozzle when it whizzes around leveling. Third, ensure the black leveling screws are tighter than what they are initially set at, one of mine fell off during a print.
Buy quality filament!! my cheapie keeps fracturing.
Hi.
What is slicer do you user ?
Can i get your profile for Anet et4 pro ?
Thanks.
I was looking a review for ET4 Plus, and watched this thinking "this is very good for the price", then at the end I realised that this review was for ET4 Pro.
Which one is better? Biqu b1 or this?
Hello my name is Bill I just purchased the et4 pro. I am having trouble setting it up I have watched this video and gone step by step.
The problem i am having is it does not seem to retain the settings when i switch from manual level to auto the z is in a different position
and when i home it it crashes anet it self isn't much help. I know they have updates for this printer. my version is V1.0.2
do i need to update first any help would be greatly appreciated thank you!!!
Have you integrated octoprint?
I also bought an ET4+ . Can somebody share his Cura 4.8 profile? I am trying to use the stock Fine 0.1 profile but I cannot seem to print small miniatures. How can I tune this up? Any hints or links?
i cant find the settings on how to start my print in the middle of the platform. its always going to the lower left and printing half on and half off. so frustrating.
Good videos, especially your first Anet review.
I’m actually going to hopefully get my Anet back to working order, after waiting on a main part (the hot end block was dead on arrival, also the worst CS I have e ever seen, not a single reply from them)
Great video as well, but can i just give some of my personal tips my 5year plus experience with creative machines may help with, especially on your bed levelling, was really bad for the beginner.
The main and very important thing, I really recommend to Just do the manual with the wheels.
I don’t know if you were aware that you were doing offset on the fly and on the auto bed levelling.
I have to say considering the rest of your video was excellent this was not very good information , especially for beginners.
In my opinion of over 5 years experience, always go with manual using the wheels, on first set up, especially with no bottom Z stop, which btw is a very strange one to me.
Couple of
More tips....
the stringing, try your temperature of your hot end, PLA, can print at 195, never over 205 tbh, my PLA settings, are always 205 H.E, and 50 bed.
Another big thing people don’t realise again PLA, can print with no bed heat at all. But around 50 is ok
Anyway sorry to Hijack your post.
You may also want to do a beginner Slicr set up and settings, as I beginner wil have no clue how to get your prints even onto the memory card.
Comparing to Artillery SW X1 I just got I like the electronics of Anet better! )
The Art is still a much more solid printer, electronics are easily upgraded.
Hi iam using anet et 4pro how can i connet wifi to my printer
Is this good for jewelry?
Any idea why the dog slips off the hotbed while printing?
Donde puedo bajar más diseños 3 d
Which one is a best when compare to Ented 3 v2 vs et4 pro
Ender 3 v2 obviously
This, Artillery Genius, or Ender 3 v2?
yes
Do you want to print flexibles ? If yes, Genius. Care about noise ? If yes, Genius. Same for heated bed (AC speed). Only issue i have with the genius is that the layering is not super tight/consistent, dimension always spot-on however.
@@atom6_ i have one too and my tolerances are not that good and thas problably a slicer setting ,together with my bad manual leveling. I wonder if those are the only variables
Hey can anyone tell me if this is better than the elegoo neptune 2 ? Thank you
To be honest is not I had to spend like 4 days to get it to print right, Elegoo Neptune 2 is way easier to update and add mods to it which there are a lot of mods for it also you can do bigger prints on the Elegoo
Please somebody tell me how to change the tension on the extruded for this printer.
Had one for 2 days, can not for the life of me fix clicking extruded.
And believe me guys, 5 year veteran printer, I’ve tried everything.
Weird thing, it printed to 2 test files on card..., but now , nope click, click , click .... driving me insane .
Any help greatly appreciates
This might not help but I thought I'd chime in anyway. The z-axis concentrics on mine were pre-tightened in an odd manner: the one on the right was super tight and the one on the left wasn't even touching the frame. Foolishly I didn't check, but this was causing it to sag to the right which meant it was too close to the bed with each z increment, this led to clicking, and eventually a blocked nozzle, despite it printing things reasonably OK. After sorting out the tension on those and replacing the nozzle it now seems fine, no clicking or bad prints.
@@AshleyMillsTube thanks man..
Sad thing is my whole hot end is proper dead after much messing.
Auto just stopped working, and yup it blocks all the time.
I need a complete new hot end kit, but after buying this new last week, skint, and still waiting for them to get back to me.
But I’ll check your answer to 👍
@@CrankyGamersUK sorry to hear that. I kinda wish I'd bought an ender 3. It's just in theory with the glass bed, leveling sensor, and touchscreen, as well as the overall construction this has a lot of potential. hope you manage to get your issues sorted out
I am not a fan of those PCB connector boards as there is huge potential for cracking traces and solder and the replacements are relativley expensive @ $21.99
It print better then ender 3 v2 printer
😍👌👍
i wan t to make traffic cones can i make more then one st a time?
No
@@peppashrek6791 actually you can
@@dennisfreitas7675 Actually?
Second
4th
Unbox a printer live
is it just me, or is this a cheap 10S ???
Hi I am first
That looks like metal.... the frog.