This is such a smart design. Only a few screws removed, take out all the sensitive parts in one shot, now you can just blast the truck off with a hose. Awesome!
It´s a great RC car. I have played a couple of times with my daughter on deeper grass and it rides great!. On our last ride on gravel something went weird. It only steers under load to one side. I cleaned it up but did not find any stones blocking the servo. Read somewhere about the servo saver. Probably I´ll need to service the saver and hope that the servo is OK...
Hi i bought a arrma kraton 8s. on my second run my transmitter stopped responding I have been trying to rebind the transmitter and Receiver with no success. The issue I’m having is once I turn on the power and press the button on the receiver to bind I’m getting the flashing light which is the right response. however once i press the power and bind button on the receiver to bind with the receiver the flashing light on the receiver turns off where it should stay on for the binding process. Can you please advise me on what actions I need to take from this point on ?
Been thinking of buying one be my first 1/5 scale roller i mainly get the rtr's you know about how long it takes to install all the equipment to get it up & running?
Can i run the stock servo on 8.4v? Is there any other bec option in between stock and 8.4? In the manual there's only two options in programming stock then all the way up to 8.4 if i use a programming box can i get 7.4 or is there really only two options for bec? Really low or really high?
How does the steering arm attach to the servo saver? At the top of the servo saver.. as mine has come off and made the truck have no steering in its first bash.. was just driving around and doing small jumps. Very small jumps. I found a screw in the chassis which I am trying to put through the servo saver into the mechanism on the steering arm.. but its screwing on slightly and then just spinning.. every time I test the steering the whole joint is coming loose and the screw comes out. This was its first bash which I will be posting the video of tonight. It wasn't really rough treatment and the X-Maxx it was up against is perfectly fine. Please help as the truck is now a very heavy/expensive paper weight. Thanks in advance.
Dear Arrma team, I just got a brand new Kraton 8S (it is definitely a V2 at least.. as I said, is brand new), and to be honest, I wasn’t pleased at all with the equipped servo. So I bought a “AGFRC Giant Scale Servo 1/5 2S A280BHLW brushless (100kg). But the mechanic at the store, told me that I need a “Servo Saver” in order to being able to install the servo. So here’s my request; could you please tell the specific, exact “servo saver” that I need to buy? Thank you all so much.. greetings from Chile!
Nothing to do with you video. But I have a question. I switch my spektrum controller on. I switch the car on. But then nothing happens. Can't go forward or backward and the steering does not work either. New batteries in the controller and fully charged batteries Please help. Thanks
@@Ruben.vandb1 I still have no clue, but according to the manual the operating voltage range is from 6 volts to 8.4 volts. But when you search the servo up itself, it says 7.2 volts max.
I’m so god damn excited man . Thank you guys so much for making bad ass rc . I also have a typhon 6s and outcast 4s and 6s from you . This is got me so anxious 😂😂
This is such a smart design. Only a few screws removed, take out all the sensitive parts in one shot, now you can just blast the truck off with a hose. Awesome!
is there any way to tighten the servo saver? mine turns like crap
Love the smirk on his face when he says” This is the Kraton 8S” 🍻👍
Before the official announcement... I Love it!!!
This is the wow factor we all wanted !!! Thank you Arrma you’re saving the rc hobby !! What a beautiful beast of a machine 🦾🦾 Arrma over everything ✅
It´s a great RC car. I have played a couple of times with my daughter on deeper grass and it rides great!. On our last ride on gravel something went weird. It only steers under load to one side. I cleaned it up but did not find any stones blocking the servo. Read somewhere about the servo saver. Probably I´ll need to service the saver and hope that the servo is OK...
Interesting way to break the story of the new 8s Arrma Kraton. =)
My wheels turn more to the left than the right, is my servo going bad or is something not lined up properly?
Something may not be lined up correctly. I had this problem twice on OUTCAST 8S and KRATON 8S
Does anyone have a video showing how to adjust the servo saver?
How would you know if the servo saver is bad or getting weak?
Hi i bought a arrma kraton 8s. on my second run my transmitter stopped responding I have been trying to rebind the transmitter and Receiver with no success.
The issue I’m having is once I turn on the power and press the button on the receiver to bind I’m getting the flashing light which is the right response.
however once i press the power and bind button on the receiver to bind with the receiver the flashing light on the receiver turns off where it should stay on for the binding process.
Can you please advise me on what actions I need to take from this point on ?
Hey, you should watch officials AVC tuning / binding / calibrating SPEKTRUM videos
It could help you, it helped me with binding and AVC issues on my Kraton and Outcast 8S
th-cam.com/video/gBXelft424A/w-d-xo.html
th-cam.com/video/wmPatUav2hw/w-d-xo.html
I'm thinking of buying one you know about how long it takes to install all the equipment to get it up & running?
Been thinking of buying one be my first 1/5 scale roller i mainly get the rtr's you know about how long it takes to install all the equipment to get it up & running?
Does the servo safer need to be centered in the up direction ?
Interesting design.
Thanks for sharing this.
So my Kraton 8s steering doesn't torn back to 0 and is really hard to keep straight now. Is this my issue?
What are the bullet connector size
When I turn the wheel on the transmitter, the module turns, but the wheels don't turn. Is that the plastic piece that you had taken out last?
Can i run the stock servo on 8.4v? Is there any other bec option in between stock and 8.4? In the manual there's only two options in programming stock then all the way up to 8.4 if i use a programming box can i get 7.4 or is there really only two options for bec? Really low or really high?
How does the steering arm attach to the servo saver? At the top of the servo saver.. as mine has come off and made the truck have no steering in its first bash.. was just driving around and doing small jumps. Very small jumps. I found a screw in the chassis which I am trying to put through the servo saver into the mechanism on the steering arm.. but its screwing on slightly and then just spinning.. every time I test the steering the whole joint is coming loose and the screw comes out. This was its first bash which I will be posting the video of tonight. It wasn't really rough treatment and the X-Maxx it was up against is perfectly fine. Please help as the truck is now a very heavy/expensive paper weight. Thanks in advance.
Dont forget to use treadlock on the servo saver screw when it treads on the servo
Absolutely :-)
Dear Arrma team, I just got a brand new Kraton 8S (it is definitely a V2 at least.. as I said, is brand new), and to be honest, I wasn’t pleased at all with the equipped servo. So I bought a “AGFRC Giant Scale Servo 1/5 2S A280BHLW brushless (100kg). But the mechanic at the store, told me that I need a “Servo Saver” in order to being able to install the servo. So here’s my request; could you please tell the specific, exact “servo saver” that I need to buy? Thank you all so much.. greetings from Chile!
Thanks this video is very helpful.
Luv the SIZE of this monster truggy. Hopefully should make it easier for my old shot eyes to work on!! BEAST 💪 👊 #ArrmaKraken
Creations arrma always made all new and distinctive 💜💚 ♥ ️🧡❤️😘😘😘😘😘😘😘👍👍👍👍👍👍👍👍👍
What do I gotta do to get that demo car ??!!!😊
What's the name of the screw driver u are using
its this one which has been rebranded in different regions now www.amazon.co.uk/Hitachi-DB-3DL2-Cordless-Screwdriver/dp/B005F4XTTU
Nothing to do with you video. But I have a question. I switch my spektrum controller on. I switch the car on. But then nothing happens. Can't go forward or backward and the steering does not work either. New batteries in the controller and fully charged batteries
Please help. Thanks
Is it safe to run the S905 servo at 8.4 volts?
Is it?
@@Ruben.vandb1 I still have no clue, but according to the manual the operating voltage range is from 6 volts to 8.4 volts. But when you search the servo up itself, it says 7.2 volts max.
this System is not bad! 👍
What not even out yet we rebuilding haha , hopefully first orders be in by xmas ik my infraction came alot later than said
Beast 👍🏿
My local hobby shop just ordered me two of them one in green one in orange
I’m so god damn excited man . Thank you guys so much for making bad ass rc . I also have a typhon 6s and outcast 4s and 6s from you . This is got me so anxious 😂😂
Have fun!
Surchaufeur thank you I definitely will for sure
Why did all this stuff come out before the premiere that was supposed to be at 11am?
That servo saver looks awful 😕 made it much harder to use an aftermarket servo. Very annoying.
Lawrence Timme well if u wanted a better servo, it’s just a change once. so not a big deal
@@rushgush it's this a none standard size and spline though, it's 15t.
Mhm maybe but servos of that size might have adapters